PSP lcd problems

[FlashArts]

I recently tried to attempt the led sound reactive trigger mod and everything was gong fine until my psp slid of my bed, i caught it in time before it cud fall, however, the lcd was still connected at the time. long story short, my lcd is whitish, for example a picture is there but is hard to see, almost black and white, i tried a second lcd and  i got the same thing, second while trying to position the lcd and flex cable to get the screen working correctly, i broke the black clip for the lcd display... i tried different thing, ductape, ect to keep it in place and working, however no luck, so my question is how to i fix this?

ps. ( different positions did fix the screen however i kant get it to stay permanent, if i turn it off, then back on, it reverts to square one)

[socomhacker239]

well you can cut up a index card and slip it between the ribbon and pins and when you put the screen back in try to keep the ribbon straight i had the same problems before.

[FlashArts]

I read that in another form, but i cant seem to get it inbetween the pins and the ribbon cable. is it suppose to go on top between the pins and the cable ( the card is visible) or beneth the cable and the pin (the card in unseen), idk if u understand what i mean.

[socomhacker239]

the second way

[FlashArts]

i just tried it. first i tried puting the notecard in first then plugd the cable on top of it, i got only a black screen, is that the right way how to do it ( forgive my noobiness, im nt retarted, i just have bad luck with psp's)

[socomhacker239]

yea that sounds correct make sure ur back light is properly connected too.

[FlashArts]

ugh, the backlight works but still no picture if i use notecard
Post Merge: July 25, 2009, 09:45:32 PMi need a tut or something, i wanted to start modding my psp, but it makes no sense if i cant see nething. i went 3 years without i psp after i briked my first one and now this
Post Merge: July 25, 2009, 10:21:29 PMafter trying and trying, my connectors are officially :censored:ed up, twisted, broken, ect

[socomhacker239]

oh ok i can make a quick little tutorial with pictures for you but if your connecters are really that bad then i wont you can get a a psp for like 30 bucks off ebay but you need to change out the screen.

[FlashArts]

yea its that bad now, i got a friend with a broken psp, im see if i can get that from him and if not i can buy a replacement connector and find someone who can solder it for me