Author Topic: zif soldering  (Read 3905 times)

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
zif soldering
« on: July 24, 2009, 10:44:26 PM »
how do you guys soder on zif?

what's the best way to solder in tiny pitch points like that...


viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline i7vSa7vi7y

  • Ω Allumnist Ω
  • *
  • Posts: 101
  • Post quality +4/-1
  • Gender: Male
  • Acidmods User
Re: zif soldering
« Reply #1 on: July 24, 2009, 11:37:07 PM »
Ima try using enamel coated magnetic wire

Offline socomhacker239

  • E = MC²
  • *
  • Posts: 327
  • Post quality +0/-0
  • Gender: Male
Re: zif soldering
« Reply #2 on: July 25, 2009, 12:25:02 AM »
i just use a magnifying glass and make sure i tin the wire really good.

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: zif soldering
« Reply #3 on: July 25, 2009, 05:12:23 AM »
i'm thinking of using magnetic wire too...so how do you prep it?


tinned the wire first then dip to flux then solder?

how you guys do it?

pics will be much appreciated if u have...
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: zif soldering
« Reply #4 on: July 25, 2009, 10:28:48 AM »
Ima try using enamel coated magnetic wire
Thats what i use works well. But dont move it around to much or it will snap.
i'm thinking of using magnetic wire too...so how do you prep it?


tinned the wire first then dip to flux then solder?

how you guys do it?

pics will be much appreciated if u have...
TO prepare you must dip in the flux first make sure you go enough on there then take a blob of solder on you iron and place the wire in the middle of blob of solder and wait will you see black liquid substance fill your solder. Then you pull the wire out it may have some enamel residue on it so whip your blob of solder on the sponge light to get off the black stuff then place the wire in the blob again and should tin it.
« Last Edit: July 25, 2009, 10:32:44 AM by Blazinkaos »

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: zif soldering
« Reply #5 on: July 27, 2009, 03:05:12 AM »
so how do you guys manage to solder lot if wires to zif without

shorting them?i'm practicing at my broken umd cable end...
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline i7vSa7vi7y

  • Ω Allumnist Ω
  • *
  • Posts: 101
  • Post quality +4/-1
  • Gender: Male
  • Acidmods User
Re: zif soldering
« Reply #6 on: July 28, 2009, 01:09:24 PM »
Solder on the wire that on the black clamp

Offline SmaRkieS

  • Fart Sniffer
  • *
  • Posts: 45
  • Post quality +0/-0
  • Gender: Male
  • Made in The Philippines
Re: zif soldering
« Reply #7 on: July 28, 2009, 06:33:42 PM »
so how do you guys manage to solder lot if wires to zif without

shorting them?i'm practicing at my broken umd cable end...

I also use hairlike wires from headphones, just use Soldering Paste for clean and easy soldering. Dip your wire to soldering paste, and dip also your soldering iron to clean the tip, apply small amount of soldering lead to your soldering iron, and solder the wire to zif. Kabayan.
« Last Edit: July 28, 2009, 06:36:23 PM by SmaRkieS »

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: zif soldering
« Reply #8 on: July 28, 2009, 08:58:35 PM »
thanks kabayan..

have you tried soldering on zifs?

what soldering tip do you use?

i bought some tip used for cp but they are no good coz my leads just

drop..my other tip don't but their tip is not small enough for the zif

soldering..

viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: zif soldering
« Reply #9 on: July 29, 2009, 09:37:26 AM »
Yea it depends on what soldering iron you get and you can various sizes of tips for it.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline SmaRkieS

  • Fart Sniffer
  • *
  • Posts: 45
  • Post quality +0/-0
  • Gender: Male
  • Made in The Philippines
Re: zif soldering
« Reply #10 on: August 03, 2009, 11:04:55 PM »
thanks kabayan..

have you tried soldering on zifs?

what soldering tip do you use?

i bought some tip used for cp but they are no good coz my leads just

drop..my other tip don't but their tip is not small enough for the zif

soldering..

Yes I did just ordinary tip. If you apply soldering paste it will work clean.

Here is my old soldering iron. Still using it for my projects.





and other old tools






See this thick soldering tip soldering flat ribbons.
PSP DEVOLUTION SOLDERING FLAT RIBBON

« Last Edit: August 03, 2009, 11:10:34 PM by SmaRkieS »

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: zif soldering
« Reply #11 on: August 04, 2009, 08:48:42 AM »
Hmm it look like my first soldering i had while back but what ever works gets the job done.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal