Author Topic: xbox 360 lighting mod  (Read 1627 times)

Offline DARk_ANGEL

  • Acidmods Rocks!!!
  • E = MC²
  • *
  • Posts: 322
  • Post quality +5/-0
  • Gender: Male
xbox 360 lighting mod
« on: September 21, 2009, 01:56:48 PM »
i wanted to do the fader with 5mm or 3mm. anyway i wanted to do the lights so what lights do i have to buy? 3mm or 5mm?
i was going to use a 12v with 4 leds so 4v goes through each led.
do i need  resistor? cuz im jus lerarning this kinda thing.
can someone also post a pic where i could wire all of these lights.

Offline Barnsey

  • Chaos Lover
  • *
  • Posts: 260
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: xbox 360 lighting mod
« Reply #1 on: September 21, 2009, 02:51:30 PM »
http://forums.llamma.com/viewtopic.php?f=19&t=7074

there is a 12v source, just under the power suply input


Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: xbox 360 lighting mod
« Reply #2 on: September 21, 2009, 04:05:04 PM »
I was never able to solder to those black chips for some reason it would never stick.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline scott

  • U.S. Army
  • Registered BST
  • Who Farted ???
  • *
  • Posts: 208
  • Post quality +0/-0
  • Gender: Male
Re: xbox 360 lighting mod
« Reply #3 on: September 21, 2009, 04:40:24 PM »
I was never able to solder to those black chips for some reason it would never stick.

Put a lot of fresh solder on it first. they are rather piniky.

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: xbox 360 lighting mod
« Reply #4 on: September 21, 2009, 05:27:45 PM »
I did that i even used flux to see if taht would help it stick it would then if barley moved the wire it would pop off  :angry: .

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline treemty

  • l,,l METAL l,,l
  • Millennium Poster
  • *
  • Posts: 1231
  • Post quality +1/-0
  • Gender: Male
  • Will mod for food
    • the1337group.com
Re: xbox 360 lighting mod
« Reply #5 on: September 21, 2009, 05:31:15 PM »
I did that i even used flux to see if taht would help it stick it would then if barley moved the wire it would pop off  :angry: .
I had the same problem

Offline DARk_ANGEL

  • Acidmods Rocks!!!
  • E = MC²
  • *
  • Posts: 322
  • Post quality +5/-0
  • Gender: Male
Re: xbox 360 lighting mod
« Reply #6 on: September 21, 2009, 06:57:14 PM »
ok now that the 12v is found i wanna put 4 led lights.
wont that be 3v going on each led? do i need a resistor?
what is better 3mm or 5mm?
cant i get th things from a local radio shack?

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: xbox 360 lighting mod
« Reply #7 on: September 21, 2009, 07:37:26 PM »
I like the 5mm more.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline phenoptix

  • Motor Mouth
  • *
  • Posts: 89
  • Post quality +2/-0
  • Acidmods User
    • Phenoptix
Re: xbox 360 lighting mod
« Reply #8 on: September 24, 2009, 12:16:57 PM »
Avoid radioshack like the plague for your LEDs, since you're in the states I believe http://www.unique-leds.com/ are pretty good. For UK and EU, my company is fairly good...
Anyway, what LEDs are you using? might be worth running 2 strings with a resistor. A bit of ballast always helps avoid runnaway (resulting in dead LEDs).

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: xbox 360 lighting mod
« Reply #9 on: September 24, 2009, 02:36:12 PM »
Very true they have good deals. Shipping is fast.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline whoFarted

  • Chief squatting Hard
  • *
  • Posts: 25
  • Post quality +0/-0
  • Acidmods User
Re: xbox 360 lighting mod
« Reply #10 on: October 01, 2009, 06:16:37 AM »
I get my 0603's from unique for a quick shipping.

However I don't like to buy my 3mm/5mm from their. I get mine from china with 100 LED's plus 100 free resistors for lke 8 bucks shipped.

I say go that route because you will obviously have more LED's but you will have enough to add to some friends consoles to make some extra bucks or for your console down the road.

I always use a resistor in case something does happen and the LED's burn out.

Keep an eye out there will be easy led board kits for the 360 coming on the market very soon. =)


Post Merge: October 01, 2009, 06:18:22 AM
PS..

Always solder to the 12v spot under the Power Supply. You have 3 hot spots and 4 neg's.  You try and draw too much power from anywhere else may draw power from somewhere else and it COULD cause you problems in the long run. Always work smart, not hard.
« Last Edit: October 01, 2009, 06:18:22 AM by whoFarted »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal