So i want to add a fader to my xbox, quite similar in function to the sickmods fader. I've already got an atmega168 controlling rgb leds with a common anode. And as i understand, the xbox 360 rol leds are also common anode. So heres my question, is all i have to do to light the leds up, is connect the cathodes to ground? Like the method i'm using with the rgb leds, I connect the ground lead of each color to it's own 2n2222 transistor, with a 1k ohm resistor going from the microcontroller I/O pin to the base pin of the transistor. and then obviously the emitter pin is connected to ground. Would this work as well for the rol leds?
Here are my sources for this information:
http://diy.sickmods.net/Tutorials/Xbox360/Ring_of_Light_Layout/http://diy.sickmods.net/Tutorials/Xbox360/How_The_ROL_Works/
