« previous next »
Pages: [1]   Go Down

Author Topic: E74 D:  (Read 3350 times)

Offline Barnsey

  • Chaos Lover
  • *
  • Posts: 260
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
E74 D:
« on: October 26, 2009, 01:53:51 AM »
will x-clamp fix this?

it wont be a 100% fix right? :/

 :censored:

~Barnsey
Logged

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: E74 D:
« Reply #1 on: October 26, 2009, 07:41:54 AM »
Thats an option i did it differently but it depends but if you havent so i would. But what i did is place a heatsink on this on chip behind GPU.
Logged

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline injungleist

  • Club AM VIP
  • Who Farted ???
  • *
  • Posts: 200
  • Post quality +0/-0
  • Gender: Male
  • mod your face off.
Re: E74 D:
« Reply #2 on: October 26, 2009, 09:54:55 AM »
i did what blazin said and it worked for one i had the error on.
try it.
Logged
thx gamerdude767
trades w/ blazinkaos
purchases from sniper (fast shipping)

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: E74 D:
« Reply #3 on: October 26, 2009, 12:35:45 PM »
There's no 100% fix for ANY RRoD (unless it's because, for example, you don't have the a/v cable in. Lol)
Logged

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: E74 D:
« Reply #4 on: October 26, 2009, 02:13:09 PM »
lol i done that before XD
Logged

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline Barnsey

  • Chaos Lover
  • *
  • Posts: 260
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: E74 D:
« Reply #5 on: October 27, 2009, 06:32:50 AM »
thanks everone,

hopefully kit will arrive tomorrow  :tup:
Logged

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: E74 D:
« Reply #6 on: October 27, 2009, 09:26:33 AM »
No problem good luck.
Logged

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline 40_ounce

  • King of the Wii-tards
  • *
  • Posts: 168
  • Post quality +0/-0
  • Gender: Male
Re: E74 D:
« Reply #7 on: October 27, 2009, 04:01:14 PM »
If your warrenty sticker is still intact micrsoft will fix the e74 for free.
Logged

Offline Barnsey

  • Chaos Lover
  • *
  • Posts: 260
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: E74 D:
« Reply #8 on: October 28, 2009, 10:22:27 AM »
really think i'd order x clamp fix if i had warrenty?
Logged

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: E74 D:
« Reply #9 on: October 28, 2009, 10:54:34 AM »
what kit did you order? I mae a part list here go to lowes and puck up what you need for $6.50

and here is the tut:

https://acidmods.com/forum/index.php?topic=33083.msg248097;boardseen#new
Logged

Offline Barnsey

  • Chaos Lover
  • *
  • Posts: 260
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: E74 D:
« Reply #10 on: October 28, 2009, 11:25:28 AM »
ordered one off ebay,
thanks for the tut,
i got all metal washers, no nylon washers.
is that ok?
Logged

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: E74 D:
« Reply #11 on: October 28, 2009, 02:19:52 PM »
Quote from: Barnsey on October 28, 2009, 11:25:28 AM
ordered one off ebay,
thanks for the tut,
i got all metal washers, no nylon washers.
is that ok?



no its not ok, you must have both, I guess you can do with all plastic, but you must have plastic washers where they contact the circut board.  what kinda kit did you order? that dont sound good
Logged

Offline Barnsey

  • Chaos Lover
  • *
  • Posts: 260
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: E74 D:
« Reply #12 on: October 28, 2009, 02:25:14 PM »
Logged

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: E74 D:
« Reply #13 on: October 28, 2009, 03:10:15 PM »
wow, thats not good, you should never put metal washers against the mobo...I stromgly suggest replacing some of the washers with nylon..any one esle ever used a all metal kit?
Logged

Offline Commmet

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: E74 D:
« Reply #14 on: October 28, 2009, 03:12:59 PM »
Quote from: modded matt on October 28, 2009, 03:10:15 PM
wow, thats not good, you should never put metal washers against the mobo...I stromgly suggest replacing some of the washers with nylon..any one esle ever used a all metal kit?

I have fixed 4 different ones using metal washers I got from B & Q and they're all still working and show no signs of stopping. Touch wood.
Logged

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: E74 D:
« Reply #15 on: October 28, 2009, 03:27:17 PM »
Quote
*** This is an ALL METAL repair kit if you DON`T want Nylons ***
But you WANT nylons =P

And Commmet: I highly suggest redoing those...just to be safe.
Logged

Offline Commmet

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: E74 D:
« Reply #16 on: October 28, 2009, 03:37:30 PM »
Well I only have one still in my possession  :laughing: But I think I'll wait and see how it does before opening it up again and going to all the bother. I'll start buying nylon ones from now on I think though.
Logged

Offline blackburn

  • Acid Modder
  • *
  • Posts: 915
  • Post quality +0/-0
  • Gender: Male
  • Xbox 360 Enthusiast and JTAGer
Re: E74 D:
« Reply #17 on: October 28, 2009, 03:45:31 PM »
E74 is most commonly a (H)ANA chip error. (Sometimes it can be caused by the GPU.) But if not X-Clamps are pointless.
Logged


All Sigs Made by ME!

Offline Barnsey

  • Chaos Lover
  • *
  • Posts: 260
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: E74 D:
« Reply #18 on: October 29, 2009, 04:12:28 AM »
hopefully getting some nylon washers today,
8 of them right?
Logged

Offline whoFarted

  • Chief squatting Hard
  • *
  • Posts: 25
  • Post quality +0/-0
  • Acidmods User
Re: E74 D:
« Reply #19 on: October 30, 2009, 06:51:56 AM »
You really need 16 of each(nylon/metal) But it depends on the size of the washers you get. Some are thicker and only need one to space and most you use two(metal/nylon). 

I would do the X clamp mod and then re flow the ana/hana chip. If you re ball the solder joints it will last you a long time to come.  I still don't get why people insist on sending to MS for repair...Yes it's free if you have a warranty, but why not spend 10-20 to fix yourself? Even when you send to MS it's still only a temp fix...It'll just RROD on you again. lol

If I was you I would focus on the ana/hana chip which is usually the main cause on E74. On all my E74 errors, I re flow the ana/hana chip top/bottom of the board and apply AS5 and the x clamp mod. It hasn't failed me yet. I also re flow all the chips, top/bottom of the board for preventative maintenance on all of my units I repair...Mainly because I offer 120 day warranty and I don't want returns lol
Logged

Offline taylorclark

  • King of the Wii-tards
  • *
  • Posts: 163
  • Post quality +0/-0
  • Gender: Male
  • I feel like I'm taking crazy pills!
    • myspace
Re: E74 D:
« Reply #20 on: October 30, 2009, 08:44:31 AM »
Quote from: whoFarted on October 30, 2009, 06:51:56 AM
You really need 16 of each(nylon/metal) But it depends on the size of the washers you get. Some are thicker and only need one to space and most you use two(metal/nylon). 

I would do the X clamp mod and then re flow the ana/hana chip. If you re ball the solder joints it will last you a long time to come.  I still don't get why people insist on sending to MS for repair...Yes it's free if you have a warranty, but why not spend 10-20 to fix yourself? Even when you send to MS it's still only a temp fix...It'll just RROD on you again. lol

If I was you I would focus on the ana/hana chip which is usually the main cause on E74. On all my E74 errors, I re flow the ana/hana chip top/bottom of the board and apply AS5 and the x clamp mod. It hasn't failed me yet. I also re flow all the chips, top/bottom of the board for preventative maintenance on all of my units I repair...Mainly because I offer 120 day warranty and I don't want returns lol

what do you use to reflow?
Logged
Gamertag- titan501x

Offline Amerikun Soljia

  • Ω Allumnist Ω
  • *
  • Posts: 129
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: E74 D:
« Reply #21 on: October 30, 2009, 12:44:08 PM »
People sed to M$ because it's easier for people who aren't very good with electronics, or don't have the time to do it themselves. Also, M$ are professionals, why not? ya know?
Logged


y nomeni patri et fili, y spiritu sancti.

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: E74 D:
« Reply #22 on: October 31, 2009, 06:58:44 AM »
whofarted...good job +1
Logged

Offline Amerikun Soljia

  • Ω Allumnist Ω
  • *
  • Posts: 129
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: E74 D:
« Reply #23 on: October 31, 2009, 04:01:21 PM »
Yeah, he is pretty witty about this stuff I think
Logged


y nomeni patri et fili, y spiritu sancti.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal