I've send you a PM
But I'll also ask it here:
Which side of the motor should i solder to e.g. the X or the L-trigger (can't find the spot for the R-trigger, would be better) and where should i solder the other side to?
https://www.acidmods.com/forum/index.php?topic=24619.0tnx
EDIT: Got some help over PM and came up to this
I tried soldering to the X, but then X doesn't work anymore, it only makes the motor rumble, but doesn't affect the PSP.
Eventually, i found a sollution to make it rumble when the L-trigger is pressed. With a needle, i've made a small hole in the plastic above the pcb in the line to the trigger and put my kynar negative in there. Now he continiously rumbles very soft, but when the l-trigger is pressed, you can feel it rumble very well. The only thing that's left is putting in a switch.
I also had to bridge the fuse of the ms led because it was melted. The ms led is now 3 times brighter so it will melt eventually, but we'll se.
EDIT2: crap, stupid me
I was testing my new mod with motorstorm and guess what? The l-trigger only works as input when rumble is deactivated. Damn, should have known that. Luckily I built in a swtich. Swtich turned on => rumble, swtich turned off => psp input.
Post Merge: November 08, 2009, 07:19:55 AM
I'm sorry fot the bump and double post, but does somebady know if there is a way to use a button to activate rumble and still use it as psp input? Without programming a chip?
tnx