Author Topic: Just Finished the start of one psp... comments??  (Read 1168 times)

Offline deathshells

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
  • Gender: Male
  • Certified Fur:censored:
Just Finished the start of one psp... comments??
« on: November 21, 2009, 09:29:08 AM »
hello, just finished messin around with the first proper mod ive done (mainly just been xbox controller smd replacements) but finally got my hands on 2 psp 1000"s was having real trouble trying to get one cheap off ebay so i decided friday ad was best bet. turns out i got an amazing one for 15 quid, then a friend at school offered me one for 40... so i took that too  :huh:
anyways anuff of mah jabberin heres the start, if you look down the list youll see homemade jewels post, thats mine and i used on of those. the leds are wired into the hold switch... didnt want to attract to much attention.  :cool:












please ignore the crack on the umd door... yes i did do that because i was careless with the scalpel i used to cut the door... but then i ordered 4 more from hong kong (worries!) but they turned out brilliant and im now using one of those. i took these pics literally just after id finished the whole thing.... at 3.15 am (*groans*) anyways.... comments welcome good or bad.... there are 6 smd's in total. :tup:
« Last Edit: November 21, 2009, 02:03:43 PM by deathshells »
If everything is going well, you've probably overlooked something.

Offline dedafmonteur

  • E = MC² Mad Scientist
  • *
  • Posts: 2049
  • Post quality +4/-0
  • Gender: Male
Re: Just Finished the start of one psp... comments??
« Reply #1 on: November 21, 2009, 09:35:39 AM »
for a first time it aint bad, but why the resistor in the umd? bit strange spot.
and is there tape on the umd door?????

Offline Vlad

  • Ω Allumnist Ω
  • *
  • Posts: 136
  • Post quality +0/-0
  • Gender: Male
  • PSP 1001 and PSP 2001 5.00 m33-6
Re: Just Finished the start of one psp... comments??
« Reply #2 on: November 21, 2009, 11:49:49 AM »
finally got my hands on 2 psp 1000"s was having real trouble trying to get one cheap off ebay so i decided friday ad was best bet. turns out i goit an amNational Socialistng one for 15 quid, then a friend at school offered me one for 40... so i took that too  :huh:

That PSP looks awesome!  :tup: Green is my favorite color, and the green LED's are the best! I bought a PSP Phat with a broken screen from a friend for 10 bucks, and I'm trading my other friend a screen for 8 LED's and some kynar wire. So now, I have a Phat and a Slim PSP both with Custom Firmware  :tup: . Well, I haven't hacked the Phat yet, but I will when I get the screen
« Last Edit: November 21, 2009, 11:51:34 AM by Vlad »
┌∩┐(◣ _ ◢) ┌∩┐


Offline W-Gaming5

  • Millennium Poster
  • *
  • Posts: 1129
  • Post quality +1/-0
  • Gender: Male
Re: Just Finished the start of one psp... comments??
« Reply #3 on: November 21, 2009, 12:22:25 PM »
:censored:
« Last Edit: July 29, 2012, 01:02:02 PM by W-Gaming5 »
:censored:

Offline deathshells

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
  • Gender: Male
  • Certified Fur:censored:
Re: Just Finished the start of one psp... comments??
« Reply #4 on: November 21, 2009, 01:16:38 PM »
wow a fair few repies already! thanks. anyway. the reason there is a resistor in there is because i wired it all up separately so the triggers were completely out of the psp when i soldered them together and same with the umd door. the wires go over the laser because i wasnt too sure on how to take it out with the possible want of putting it back in, so i just unplugged the laser flatwire and taped it down on top of the port. really dont want to be pulling this lot apart again even though its simple i had a bit of trouble with insulation tape (heatshrink not to hand at the time) not quite covering the connections enough so i ended up with the leds lighting up when i didnt want them to! i think ive answered everything... :yess:
If everything is going well, you've probably overlooked something.

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: Just Finished the start of one psp... comments??
« Reply #5 on: November 21, 2009, 08:19:57 PM »
looks good :) nice job.

Offline akomismo01

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
  • prOudLy PiNoy!..
Re: Just Finished the start of one psp... comments??
« Reply #6 on: November 21, 2009, 10:24:41 PM »
that very cool..^_^ keep it up..

Boooh Yah!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal