Author Topic: what wires are these?  (Read 2769 times)

Offline akomismo01

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
  • prOudLy PiNoy!..
what wires are these?
« on: January 01, 2010, 06:24:12 AM »


image is from hawk's mod..

Boooh Yah!

Offline TeaBubblez

  • ~BubbleTea~
  • Ω Allumnist Ω
  • *
  • Posts: 131
  • Post quality +0/-0
  • Gender: Male
Re: what wires are these?
« Reply #1 on: January 01, 2010, 07:09:38 AM »
im guessing magnet wires? coorect me if im wrong

Offline aZiZ1

  • Granny Spanker
  • *
  • Posts: 492
  • Post quality +0/-0
  • Gender: Male
Re: what wires are these?
« Reply #2 on: January 01, 2010, 07:25:08 AM »
i wanna say 30awg kynar wire.

Offline TeaBubblez

  • ~BubbleTea~
  • Ω Allumnist Ω
  • *
  • Posts: 131
  • Post quality +0/-0
  • Gender: Male
Re: what wires are these?
« Reply #3 on: January 01, 2010, 08:13:30 AM »
in my opinion those seriously do not look like 30awg kynar wire

Offline dedafmonteur

  • E = MC² Mad Scientist
  • *
  • Posts: 2049
  • Post quality +4/-0
  • Gender: Male
Re: what wires are these?
« Reply #4 on: January 01, 2010, 09:18:38 AM »
i know that wire, its not kynar i just dont know what its called again. its thinner than kynar.

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: what wires are these?
« Reply #5 on: January 01, 2010, 09:28:39 AM »
I think Hawk is the guy that uses the TINY wires from headphones or it looks like its just Magnetic Wire

You can get it online, just search 30 Gauge Magnetic Wire   but be warned its thin but easy to short because there is little protective coating on it.

Offline TeaBubblez

  • ~BubbleTea~
  • Ω Allumnist Ω
  • *
  • Posts: 131
  • Post quality +0/-0
  • Gender: Male
Re: what wires are these?
« Reply #6 on: January 01, 2010, 09:33:43 AM »
yay i was right magnet wires. I also heard that someone here *forgot who* uses tiny wires from headphones

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: what wires are these?
« Reply #7 on: January 01, 2010, 10:26:08 AM »
smarkies, blazinkaos and wetfusion also uses magnet wires on their mod too..

i use them twice already in my recent mods.. :tup:
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: what wires are these?
« Reply #8 on: January 01, 2010, 04:38:03 PM »
watch this stuff, its dangerous, especially the thinner stuff, as jumbo said it only has a thin insulating enamel coating which can scape off easily without noticing, leaving bare wire which could cause a short. I highly recommended kynar wire as the insulation is thicker and much more durable.
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline akomismo01

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
  • prOudLy PiNoy!..
Re: what wires are these?
« Reply #9 on: January 01, 2010, 05:57:59 PM »
Thanks guys.. .i taught its beter to use this because its thinner..

Boooh Yah!

Offline TeaBubblez

  • ~BubbleTea~
  • Ω Allumnist Ω
  • *
  • Posts: 131
  • Post quality +0/-0
  • Gender: Male
Re: what wires are these?
« Reply #10 on: January 01, 2010, 06:09:20 PM »
in my opinion i think that any wire can be used no matter how thick the insulation is. Once you work with it for a while you get used to how to strip the wire, basically how to work with it. As for new modders, they should stick with kynar wires for now or forever xD because it has a thicker insulation so itll have a less chance in shorting out and it would be troublesome.

Offline akomismo01

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
  • prOudLy PiNoy!..
Re: what wires are these?
« Reply #11 on: January 01, 2010, 08:20:22 PM »
gues i'll stick with kynar.. thanks for answering

Boooh Yah!

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: what wires are these?
« Reply #12 on: January 02, 2010, 02:28:13 PM »
don't feel bad, all the real modders, and pro's use kynar. Example Arioch_76 who needs thinner wire when you can fit this much kynar in a psp.

|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline TeaBubblez

  • ~BubbleTea~
  • Ω Allumnist Ω
  • *
  • Posts: 131
  • Post quality +0/-0
  • Gender: Male
Re: what wires are these?
« Reply #13 on: January 02, 2010, 03:51:42 PM »
o wow ... thats alot lol

Offline SmaRkieS

  • Fart Sniffer
  • *
  • Posts: 45
  • Post quality +0/-0
  • Gender: Male
  • Made in The Philippines
Re: what wires are these?
« Reply #14 on: January 02, 2010, 08:07:25 PM »
I use those wires on all of my mods.





those wires are best for this type of SMD's



More here.
https://www.acidmods.com/forum/index.php/topic,31301.0.html

Offline K.A.O.

  • E = MC²
  • *
  • Posts: 333
  • Post quality +4/-0
  • Gender: Male
  • Acidmods User
Re: what wires are these?
« Reply #15 on: January 02, 2010, 10:52:26 PM »
I use those wires on all of my mods.





those wires are best for this type of SMD's



More here.
https://www.acidmods.com/forum/index.php/topic,31301.0.html
will these short because of no coding protection?
« Last Edit: January 02, 2010, 10:53:54 PM by K.A.O. »

Offline SmaRkieS

  • Fart Sniffer
  • *
  • Posts: 45
  • Post quality +0/-0
  • Gender: Male
  • Made in The Philippines
Re: what wires are these?
« Reply #16 on: January 03, 2010, 05:36:48 PM »
There is a plastic coating, you need to burn the wire to expose the copper wire.

Or if your solder is hot enough to burn the plastic coating.

If you have a headphone try to tester the the wires and you will know that its coated with plastic.

If you can check my thread, I'm using it on all my mods.

Offline SN!P3R

  • Millennium Poster
  • *
  • Posts: 1444
  • Post quality +0/-10
  • Gender: Male
Re: what wires are these?
« Reply #17 on: January 03, 2010, 06:30:29 PM »
Those sir are electricity conducting wires.

Oh, you wanna know what type?

The correct term is acrylic wire, I don't recomend using them unless your pro.
BEST 360 MODDING
HELP OUR ECONOMY!

360 MASHUP THREAD

Offline SmaRkieS

  • Fart Sniffer
  • *
  • Posts: 45
  • Post quality +0/-0
  • Gender: Male
  • Made in The Philippines
Re: what wires are these?
« Reply #18 on: January 04, 2010, 01:15:56 AM »
already used to all (21) Modified PSP's, only few are documented on my thread.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal