stove bright

[eddieluu]

i want to know if i can use stove bright spraypaint to paint my 360?

[scott]

You can paint an xbox with any kind of paint.

Will it look good? Probably not.

Get Krylon Fusion. Thats made for plastic.

[LYNX]

X2 on the Krylon Fusion.

[tapdisbong]

ya krylon fusion is the best lol. it is though check out my wii and psp i painted. i used krylon fusion with clear coat over it(gloss) protects it and keeps it shinny.

[milko002]

NO! Dont use that!!!! I could eat the plastic up. Also the P.H in your sweat will fad Krylon Fusion after some time. Auto paint at a low temp bake so you dont shrink the plastic. It has to bake for 1 hr at 100 degrees. NO MORE NO LESS THAN 100 DEGREES.The paint molecules will bond to the plastic.

[pigoesfar]

Honestly, everyone says that Krylon Fusion is the best, but in my opinion and experience, I feel that either Duplicolor Vinyl and Fabric or Duplicolor Auto Spray with adhesion promoter and clear coat is the best way to go.  Krylon is simply a cheaper and lower quality paint.

[jrfhoutx]

yes, but krylon fusion is also far easier to use for beginners. much easier for a first time painter...

[pigoesfar]

good point although I spent about a whole week of free time leaning and taking copious notes on tutorials from MyCustomXbox and other people on how to paint effectively.  Also, I tend to be a perfectionist when it comes to stuff like this... 

[jrfhoutx]

I did the same, but most of the time something goes wrong the first time around, regardless of the method you use...

[pigoesfar]

Unfortunately, this sounds weird, the first time it went perfect, so I had no mistakes to learn from, the controller I am doing now, this is the first big bomb.  Turned out really badly lol, sanded it down, redoing the whole design process starting tomorrow...