How To Make a PsP Laptop

[aToMiiK MaGiiKArP]

ok so here goes... the psp laptop is only going to have the screen above the umd door. i am currently working on adding a keypad. would be grateful if you could post ideas

I DO NOT TAKEE RESPONSIBILLITY FOR YOUR PSP, IF IT BREAKS DURING DOING THIS IT IS INTIRELY YOUR FAULT.

HERES THE TUTORIAL.

1. Take of you psp faceplate

2. Unclip your screen from the metal piece holding it to the psp

3. then on the top of your psp faceplate, where those little holes are up the top/infront of  your umd drive you need to use a knife and cut that top bit of.

4. lift the psp screen up but DO NOT PULL IT AWAY FROM THE MOTHERBOARD!!! then re attach your case--- the bit you cut out should be wide enough for the ribbon cable to fit through.

5. screw it all back together, you made neeed a bit of superglue if neccisary.

6. i just got some black wire tape here and put it round my screen to not only hold it up but also to suport it otherwise i would hyper extend the ribbon cable. i sugggest using wire tape because it looks neater than maybe selotape.


SORRY THE PICTURES ARNT GREAT BE UPLOADING SOME MORE IN A FEW DAYS -.-

[Cookie Monster]

i don't know why but i like it

[aToMiiK MaGiiKArP]

i don't know why but i like it

kl u should like it. it totally works and this is not a fake why not try it then post it?

[aquatsr]

What made you want to do this?

[aToMiiK MaGiiKArP]

What made you want to do this?

I have had that psp for a long time and wanted something differant. with out the money i couldnt afford a 360 or ps3 so i though mod my psp...

[wtfisausername]

That is a dumb idea since the screen/ribbon could get damage easily. But it does look nice. familiar in a way to something... maybe a sidekick? Btw where did you get the background picture?

[TheBboyKnowledge]

could you please make a more detailed guide or a video guide....

 

i really want to do this and i have room for trial and error b/c  i have 2 psp's so i will try this

but can you post the tools i will need and a more detailed guide

if you can do this man then you are the best!

[alentris]

could you please make a more detailed guide or a video guide....

 

i really want to do this and i have room for trial and error b/c  i have 2 psp's so i will try this

but can you post the tools i will need and a more detailed guide

if you can do this man then you are the best!

If you can't make this with the information given, don't attempt it. You'll just end up with 2 broken psp's.

[aToMiiK MaGiiKArP]

That is a dumb idea since the screen/ribbon could get damage easily. But it does look nice. familiar in a way to something... maybe a sidekick? Btw where did you get the background picture?

... the ribbon cable can easily break true, but i have made it so it wont. what i did was add the wire tape to the base of the screen where the ribbon cable goes into the psp. i got the picture on google images by typing in psp or psp inside.
Post Merge: February 17, 2010, 04:59:37 AM

could you please make a more detailed guide or a video guide....

 

i really want to do this and i have room for trial and error b/c  i have 2 psp's so i will try this

but can you post the tools i will need and a more detailed guide

if you can do this man then you are the best!

Yes no probs i posted this psp laptop for ppl to do. ok...

i have made a video here is the link: 

PsP Laptop.WMV

the tools list is in the description

[TheBboyKnowledge]

commented on video btw...

but thanks this is better

[aToMiiK MaGiiKArP]

commented on video btw...

but thanks this is better

i had to remove ur comment due to swearing sry