Author Topic: COMMENT thread (Read 9005 times)

Modded Matt · « **on:** March 12, 2010, 11:16:39 AM »

this is where you should place comments or questions for the competitors, please start post by addressing the competitor

example:

@ spurgurgle how did you......
@ fookz wow that looks nice how do you...

FOOKz™ · « **Reply #1 on:** March 13, 2010, 04:57:21 PM »

Quote from: crazy-modder on March 13, 2010, 03:12:25 PM

lol o ya that vaseline you guys may see is not used for what some of you may think . I use it to lube joysticks, it works really good.

I didn't notice until you pointed it out!

loloolollo

Are you gonna duct tape fireworks too it?

edit by spurg... i splitt this out of crazys thread and merged it here as this is the comment thread for the mod

Neubit · « **Reply #2 on:** March 13, 2010, 05:33:59 PM »

@crazy-modder

"I use it to lube joysticks"

Isn't that just another way of saying it?

edit by spurg... i splitt this out of crazys thread and merged it here as this is the comment thread for the mod

crazy-modder · « **Reply #3 on:** March 13, 2010, 06:06:18 PM »

LMAO.... god i shouldn't have pointed it out.

edit by spurg... i splitt this out of crazys thread and merged it here as this is the comment thread for the mod

crazy-modder · « **Reply #4 on:** March 14, 2010, 08:54:01 AM »

@ Spurgurgle

Thats looking pretty good so far. My original snes looks nothing like the one you have. Did they make them different in the UK than the US?

Edit by spurg... i splitt this post out of my thread and merged it here as this is the comment thread...

spurgurgle · « **Reply #5 on:** March 14, 2010, 09:03:16 AM »

Quote from: crazy-modder on March 14, 2010, 08:54:01 AM

@ Spurgurgle

Thats looking pretty good so far. My original snes looks nothing like the one you have. Did they make them different in the UK than the US?

yeah its going ok so far... but this is the easy bit.... it'll be actually wiring up the moved cartridge slot... theres like 62 pins for it....... arg...

and yeah i think the us and uk versions were different...

froggy · « **Reply #6 on:** March 14, 2010, 09:40:11 AM »

@spurgurgle

That Is So Friggin Cool, I Wish I Had Some Money Right Now, I Want To Enter, But Mod A Ps1

Edit by spurg... i splitt this post out of my thread and merged it here as this is the comment thread...

toadzilla · « **Reply #7 on:** March 14, 2010, 11:28:24 PM »

@Pspkicks

not sure if im allowed to post but here it goes ur using a elite spec edition mw2 console dam this should be good

Edit by spurg again... this was on psp's work log thread. i splitt it out and merged it here in the comments thread...

PspKicks316 · « **Reply #8 on:** March 15, 2010, 02:11:12 PM »

@toad
Ah, but who said I'd keep the case?

For the record:
If someone wants to post in my thread, I have NO problem with it whatsoever. In fact, I'd like that. This way I can see people posting interest in my entry and can answer questions/comments faster. XD

(If that's okay with you, Matt and Spurg)

toadzilla · « **Reply #9 on:** March 15, 2010, 11:38:32 PM »

@Pspkicks

u keeping the hard drive too or u modding it also

PspKicks316 · « **Reply #10 on:** March 16, 2010, 04:37:45 AM »

@toad
Not sure

alman101 · « **Reply #11 on:** March 18, 2010, 01:59:48 PM »

It's looking like this mod-off will be an interesting one. Most are being very secretive about their projects which is cool. Nice to see some new modders in for the comp. I may be entering later on, well see how many controllers I can sell locally, since I don't have a stock console anymore. Looking to mod a gamecube... ya a gamecube, the funnest console ever in my opinion. Looking into a viper mod-chip for burnt games and a clear case replacement. And yall know me, there will be a plentiful amount of colours in there somewhere... haha

PspKicks316 · « **Reply #12 on:** March 18, 2010, 02:02:23 PM »

Gamecubes are pro. Have fun lol

alman101 · « **Reply #13 on:** March 18, 2010, 02:05:12 PM »

Quote from: PspKicks316 on March 18, 2010, 02:02:23 PM

Gamecubes are pro. Have fun lol

I hope I get the opportunity to mod one, thinking more about painting it also. Maybe a rubix cube theme... but all those colours aint gonna be cheap haha

PspKicks316 · « **Reply #14 on:** March 18, 2010, 02:08:24 PM »

Yeah. Haha. Just finished another part of mine...woo!

Modded Matt · « **Reply #15 on:** March 18, 2010, 02:10:29 PM »

to be clear, as I have been asked this more than once, you can start at anytime, just show a picture of the unmodded console with your start date and name in it...the only stipulation is you must be finished on time, so the sooner you start the better off you will be..

froggy · « **Reply #16 on:** March 18, 2010, 02:11:17 PM »

Hey Alaman101 Were are you from, over where i live they only cost $10-$25 Dollars.

alman101 · « **Reply #17 on:** March 18, 2010, 02:16:08 PM »

Quote from: froggy on March 18, 2010, 02:11:17 PM

Hey Alaman101 Were are you from, over where i live they only cost $10-$25 Dollars.

I am from Canada. Look at my profile picture
And what do mean about your prices? the cost of a gamecube?

PspKicks316 · « **Reply #18 on:** March 18, 2010, 02:20:01 PM »

He means the gamecube.

Also, I just came to the unfortunately conclusion that 360 cases aren't flat................................................................. god damn plexi.

Modded Matt · « **Reply #19 on:** March 18, 2010, 02:21:33 PM »

plex can be contured, use a 5 gal bucket or something of the sort, and a heat gun to mold it

froggy · « **Reply #20 on:** March 18, 2010, 02:23:58 PM »

Yeah I Ment gamecube, srry,

alman101 · « **Reply #21 on:** March 18, 2010, 02:24:10 PM »

Quote from: modded matt on March 18, 2010, 02:10:29 PM

to be clear, as I have been asked this more than once, you can start at anytime, just show a picture of the unmodded console with your start date and name in it...the only stipulation is you must be finished on time, so the sooner you start the better off you will be..

Ya I remember you implemented that rule a while back. I just need to get my funding in order. I just finished a new cooling mod for my PS3, (4) 40mm fans intaking air along the side, and (2) 80mm fans exhausting air out the top. I may need to sell the controller I did last mod-off, I should be able to get a $100 for that. I could honestly start a local mod business, I sold a ps3 controller last month for $80 that had a PS button LED and a SMD swap

PspKicks316 · « **Reply #22 on:** March 18, 2010, 02:24:42 PM »

Huh. Well if I were to be putting it on my 360 case, what would be the best way? Just put it on the case, clamp it, and gun it?

alman101 · « **Reply #23 on:** March 18, 2010, 02:25:52 PM »

Quote from: froggy on March 18, 2010, 02:23:58 PM

Yeah I Ment gamecube, srry,

$30-$60 I've seen around here. Most come with a few games and controllers

froggy · « **Reply #24 on:** March 18, 2010, 02:29:51 PM »

wow, i could buy around 3 gamecubes or 2 playstation 2

alman101 · « **Reply #25 on:** March 18, 2010, 02:34:14 PM »

Ya well u gotta remember, we have our own dollar, compared to the US, we pay 20-30% more for stuff.

And its not the gamecube thats gonna kill me, its the price of the viper mod-chip, the replacement case, the special nintendo screwbit to open the case, LEDs, and mayb a chip to run them. But I do have sound reactive boards I got from the last mod-off, but there not as good as pulseVU chip would be... O ya on top of that, I have to ship internationally of coarse. Theres $50 alone

froggy · « **Reply #26 on:** March 18, 2010, 02:37:57 PM »

Wow, Well I Wish You Good Luck

PspKicks316 · « **Reply #27 on:** March 18, 2010, 02:42:19 PM »

Protip: Plexi melts when using a dremel cutoff wheel. Super easy to cut at the 35k rpm setting! =D

FOOKz™ · « **Reply #28 on:** March 18, 2010, 02:46:23 PM »

Protip: To Cleanly cut large sheets of plexi glass don't use a Dremel tool bit at super high RPM to cut it, it will melt and cause the edges to form burrs.

- To Cut Large plexi glass sheets with a thickness of 3/16++ ; 28 Tip Per Inch Wood Blades for a jigsaw works 100%.

PspKicks316 · « **Reply #29 on:** March 18, 2010, 02:49:15 PM »

Yes, but the edges won't be seen so I don't mind lol. I sanded the sides afterwards.

News:

Author Topic: COMMENT thread (Read 9005 times)