[WORKLOG] PSP 1000 white with custom JEWEL and 12 Leds TOTAL

[akomismo01]

HELLO AM! THIS IS MY WORKLOG FOR MY PSP.. MY GOAL IS TO FINISH THIS BEFORE MAY 27 (BECAUSE ITS MY BDAY ! IM TURNING 16!! ) STAY TUNED FOR UPDATES!

MODS THAT WILL BE DONE:
1. Power Led swap (DONE)(BLUE)
2. Charge Led swap (DONE)(WHITE)
3. Memory Card and Wifi Led swap (DONE)(BLUE)
4. UMD Jewel Mod (ALMOST DONE)(4LEDS BLUE)
5. L/R TRIGGER MOD (DONE)(WHITE)
6. Speaker Holes LEDS (NOT YET DONE)(WHITE)
7. Front Speaker Holes (DONE)(BLUE)


PEOPLE! I NEED YOUR SUGGESTIONS ON WHAT PLEXI WILL I USE!?!? BY THE WAY.. THESE TWO PLEXI COST ONLY PHP100=$2 .. CHEAP HERE ISN'T IT?

this?



oR THIS?




\THIS IS THE CASING THAT I AM USING> (OEM WHITE CASING)


AND THIS IS THE AMP.

UPDATE!: APRIL 10,2010 ! I FINISHED PUTTING THE LEDS AND JEWEL ON THE UMD DOOR! HERE ARE THE ACTUAL PICS!

with the white light on!


with the blue light on!


=========brightness reduced because the camera shot will be blur just like above======

with the blue light on!


with the white light on!


with the blue and white light on!

UPDATE!: APRIL 14,2010 ! PROBLEM AFTER EVERYTHING!!

here is my problem
Video030.mp4

notice when i touch the backpart of my backplate where my lm386 is placed?

any ideas guys?

here is a clearer video about my problem..
Video034.mp4

;D ;D ;D ;D ;D ;D ;D

PLEASE LEAVE A COMMENT OR SUGGESTION

[froggy]

hey thats pretty cool you should use the dragon plexi,
1 question what are all those wires and chips in the last 2 pics, or for what are they?

[akomismo01]

ow.. that one is the lm386 amp.. i used it for the led to react to sound.. and the 2nd chip i think u said is not a chip.. its just a copper board with solder.. i used that style from another modder here..

[froggy]

Couldnt you just wire the leds to the speaker to do the sound reactive mod, or what do is make it brighter or what, and by what do you mean by its a copper board with solder

[akomismo01]

i use lm386 amp so that the leds would be more brighter and you can have the wlan as the switch..

and the copper board with solder is just a simple board so that i can neatly place the wires.
Post Merge: April 11, 2010, 09:34:28 AM

UPDATE!: APRIL 10,2010 !

[atomicareprise]

nice kabayan..

[loboplayero]

dam!!!!!!!! i like it!!!!!!!!!!!! :dribble:thats sweet

[akomismo01]

i just got a problem before finishing it!!
Post Merge: April 14, 2010, 02:58:45 AMhere's my problem!

Video030.mp4

notice when i touch the back part of my backplate where i placed my lm386?

[arjohn]

you are not touching the one were did you put the lm386..why.? because your touching the battery. just rewire your work. and put a tape in your lm386 and copper board. its like having a ground in your work.

[akomismo01]

im not touching it.. here is a clearer video..

Video034.mp4

[LaserShark]

wow that's a really sick mod.

props. wish I could help with your problem.

[Frankie.R]

I think your problem adds quite  a cool effect. Like a touch control. Just my opinion. Hope you get it sorted.