Author Topic: HELP! WLAN switch!  (Read 1834 times)

Offline TheSuperHack3r

  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
HELP! WLAN switch!
« on: July 28, 2010, 04:49:22 AM »
Hey, sorry this post has been posted many times before on this forum but it is about using the wlan switch to turn on and off LEDs. I am currently doing my 2nd mod which is the internal chotto go!cam mod. I have stripped down my psp camera and i know where to wire everything apart from the switch. Here is the wiring diagram:



The D(+) switch i am going to use the WLAN switch. I have found this:



Translation:
blue-> solder 1 wire to both of them (this way wifi is always on and the function of the switch is turned off)
red -> Solder the negative wire to this point (when you put your wifi switch to the ''off'' position -> ''off'' is now on ;) your leds will turn on)

This is picture above is for turning LEDS on and off. I see that you have to bridge 2 connections so the WIFI is always on. The other point you need to put the negative wire on.... where do you put the positive wire? OF course i will not be putting positive and negative because i am not doing the LED mod. I am doing the internal cam mod. I just need the basic prinicable.

Please resond :D Thankyou!


Post Merge: July 28, 2010, 09:54:29 AM
:beg: :beg: :beg: :beg: :beg: help , i really want to start the mod :D :help: :help: :help:
« Last Edit: July 28, 2010, 09:54:31 AM by TheSuperHack3r »

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: HELP! WLAN switch!
« Reply #1 on: July 28, 2010, 10:15:12 AM »
the wifi switch will provide the ground, when the switch is pushed down, and disconect the ground when in the up position. you can use any V+ area of the psp depending on the voltage needed.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal