Play & Charge - Help And Advice Needed

[strpwnedulol]

Well, I Have 2 or 3 X-Box 360 Charge and Play/Plug and Play/Play and Charge Kits and Was Wondering If I Could Use Those To Program My Chips (12f683-I/P, PIC16F84A-04/P, and PIC16F688-I/P-ND)...

For Ex: (In The Diagram(s) HERE ) Instead Of Soldering The Programmer To A DB-9 Serial Connector, Solder It To The Leads On A Cable From One Of My Kits...
(I'm referring to something like this: CLICK HERE)

How Would I Do So? (What Leads Go Where?; Can It Work?; Will It Work With Any Programming Software?; ETC...)

Thanks in advance.
-Josh

EDIT: I Found A Schematic Of The PnC Cable: HERE But I Don't Know How To Read It/Understand It/Apply This Knowledge.

[Modded Matt]

it is posible, on some devices some are allow ICP and some dont. have you ever programed these chips before?

The 12f683 is 8 pin and the other two are 16pin, what might I ask you are doing with them? the 16f84A I have only ever seen used for spitfire which is a dead end mod. the 16f688 is a newer chip but i have not seen it used on any xbox related projects.

[strpwnedulol]

I'm Not Sure About Actual Possibility.
But in Theory....

Also:
12f683 Chips = For R/F Controllers
16f688 Chips = For R/F Controllers Using The Schematics In The Attached PDF File ( I also attached the programmer shown in the PDF -( Rename The Picture To A Zip File... )- If you do not trust me or something then don't download it  )
16f84A Chips = for friends who complain about  hard to reach controller buttons (they have small hands almost like a 10year old.)

[Brainstorm32]

Where is this programmer software. I would like to test it out. It shows a s Jpeg file

[Modded Matt]

this looks like one awsome mod. I can do the play and charge programmer, but in doing so, you will no longer be able to use the play and charge function. I pmed you.

[Brainstorm32]

Nevermind. If I could read I would have noticed that the file needed to be changed to a zip file

[strpwnedulol]

I pmed you.

I Replied.

Nevermind. If I could read I would have noticed that the file needed to be changed to a zip file

Reading Does Help... 
Post Merge: April 25, 2010, 02:32:41 PMTell Me If I'm Wrong, But Is The Info Correct In The Excel Table Here Correct?
Post Merge: April 26, 2010, 02:30:42 PM
i found this, and if im not mistaking the ICSPDAT and ICSPCLK go to the respectable DATA + and DATA - of the USB-cord/PnC-Cable and the + and The - Go To the Power And Ground Of The USB-Cord/PnC-Cable And then i dont know about the Vpp Maybe An External Battery???