Author Topic: Viking360 Controller w/Custom XCM Case! (Read 13698 times)

Ben. · « **on:** June 09, 2010, 02:00:13 PM »

Newest Custom Controller. Fitted with a Raven.

802Chives · « **Reply #1 on:** June 10, 2010, 12:36:55 PM »

thats shexy!

Why did they not include a chrome battery compartment?

Where did you put your programming port?

Ben. · « **Reply #2 on:** June 10, 2010, 12:39:34 PM »

Well It was a full chrome shell, but I don't like the feel of the chrome on the back so used a standard MS black back. The battery compartment is a silver rather than a chrome and I have no idea why! haaa

I modded the PnC port rather than adding a 3.5mm programming port

robin1989 · « **Reply #3 on:** June 10, 2010, 12:43:48 PM »

very sexy. i must say i do like crome

laxboy · « **Reply #4 on:** June 10, 2010, 12:53:03 PM »

That is really sick, nicely done the joysticks are extremely nice so do you have to use a diffrent type of cord for this? Im not sure which port you mean.

Ben. · « **Reply #5 on:** June 10, 2010, 02:50:39 PM »

Quote from: laxboy on June 10, 2010, 12:53:03 PM

That is really sick, nicely done the joysticks are extremely nice so do you have to use a diffrent type of cord for this? Im not sure which port you mean.

PnC - Play 'n' Charge

So you can just use your play n charge cable to plug it into your PC and change presets/drivers..

FOOKz™ · « **Reply #6 on:** June 10, 2010, 11:24:25 PM »

Are the analog sticks rubbery or hard plastic?

I would like to know where you got those thumbsticks.

Ben. · « **Reply #7 on:** June 11, 2010, 12:59:21 AM »

Quote from: FOOKz on June 10, 2010, 11:24:25 PM

Are the analog sticks rubbery or hard plastic?

I would like to know where you got those thumbsticks.

They are rubbery. It's the new XCM case, come's with light up, clear thumbsticks..

mechgamer123 · « **Reply #8 on:** June 18, 2010, 02:38:29 PM »

Dang dude, that's nice!
I want to install a viking mod on my controller, but I'm not sure how to "expose the trace" How the

did u do that???

Squeck · « **Reply #9 on:** June 18, 2010, 02:44:26 PM »

You can scrape the trace with a xacto knife, then you apply a little amount of flux and you are ready to solder your wires

mechgamer123 · « **Reply #10 on:** June 20, 2010, 06:40:10 PM »

what exactly does flux do?

phenoptix · « **Reply #11 on:** June 21, 2010, 09:18:48 AM »

Hey Ben! Nice controller, not too sure about the tablecloth though!!

Flux helps the solder flow. You can get solder with a flux core, and you can also flux the areas you want to solder so the solder flows onto (and into) them more easily. Basically it reduces the surface tension of the solder making it behave more like a fluid. It does other things but that's the important one.

smithy141 · « **Reply #12 on:** June 23, 2010, 12:45:01 PM »

nice controller, do you sell these?

Ben. · « **Reply #13 on:** June 23, 2010, 02:18:53 PM »

Quote from: phenoptix on June 21, 2010, 09:18:48 AM

Hey Ben! Nice controller, not too sure about the tablecloth though!!

You try telling the mother that!

Quote from: ts-mods on June 23, 2010, 12:45:01 PM

nice controller, do you sell these?

Yeah I do..

smithy141 · « **Reply #14 on:** June 23, 2010, 02:26:36 PM »

klkl just wondering how much you charge?

Ben. · « **Reply #15 on:** June 23, 2010, 02:34:12 PM »

I sold that one within a day for £124.99

Thejld · « **Reply #16 on:** June 23, 2010, 02:38:57 PM »

Yea the tablecloth just completely ruins the background lol.

Ben. · « **Reply #17 on:** June 23, 2010, 02:39:24 PM »

Quote from: Thejld on June 23, 2010, 02:38:57 PM

Yea the tablecloth just completely ruins the background lol.

Well I like it so :P

Thejld · « **Reply #18 on:** June 23, 2010, 02:42:51 PM »

Ben is cg or cg1 ezier for the install?

Ben. · « **Reply #19 on:** June 23, 2010, 02:47:15 PM »

I prefer CG2 but I have done well over 100+ Viking Controllers mostly on CG2

smithy141 · « **Reply #20 on:** June 23, 2010, 02:51:25 PM »

kk is viking chip easy to install?

Ben. · « **Reply #21 on:** June 23, 2010, 02:52:15 PM »

Nope :L

Takes me over an hour still. 20 Wires is a tight squeeze..

smithy141 · « **Reply #22 on:** June 23, 2010, 02:53:15 PM »

lol where can i purchase the diy kit?

Ben. · « **Reply #23 on:** June 23, 2010, 02:54:14 PM »

From my site, which I'm not allowed to post

Send me an email here: ben@rapidcontrollers.co.uk ;D

Thejld · « **Reply #24 on:** June 23, 2010, 02:55:48 PM »

Ben arent alot of the via points/ traces next to the black chip on the back?

smithy141 · « **Reply #25 on:** June 23, 2010, 02:56:15 PM »

kk, i dnt wanna buy one at the moment but how much do they cost?

Ben. · « **Reply #26 on:** June 23, 2010, 02:56:50 PM »

hmm, not really, most the points are on the front of the board and the chip is stuck to the back :/

Post Merge: June 23, 2010, 02:57:24 PM

£34.99 with a free set of LEDs.

smithy141 · « **Reply #27 on:** June 23, 2010, 02:59:43 PM »

klkl not bad, will i be able to choose what type i want e.g tyrs hand , thors hammer etc ?

Ben. · « **Reply #28 on:** June 23, 2010, 03:03:00 PM »

It's all on chip, just depends how you want to set it up..

You need to know what kind of controller you have first so go HERE!

CG2 Download Links

Duo/Raven - Click Here!

Sleeper/Hammer - Click Here!

Tyr's Hand - PM Me.

CG Download Links

Both Raven & Hammer - Click Here!

Matrix Links

Tyr's Hand - Click Here!

smithy141 · « **Reply #29 on:** June 23, 2010, 03:03:59 PM »

thanks ill check that out!

News:

Author Topic: Viking360 Controller w/Custom XCM Case! (Read 13698 times)