Author Topic: Using Canned Air To Clean Inside Of PSP, Please Help.  (Read 1983 times)

Offline Dinesy

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Using Canned Air To Clean Inside Of PSP, Please Help.
« on: June 21, 2010, 09:02:41 AM »
When im replacing or repairing the inside of a PSP, would spraying canned air on the LCD and inside faceplate and quickly reassemble, would that stop dust from settling inside the console ?

If so, how would i stop dust from getting under the faceplate and LCD.

Thanks

Offline loboplayero

  • hardcore psp modder!!
  • MFH
  • Granny Spanker
  • *
  • Posts: 442
  • Post quality +14/-0
  • Gender: Male
  • specialize in psp led lighting!!
Re: Using Canned Air To Clean Inside Of PSP, Please Help.
« Reply #1 on: June 21, 2010, 09:43:11 AM »
well a lot of psp owners go thru this i had this problem my self the only way is stop was when i started to put away my psp on a case for better work a sealed case will prevent mini dust balls.
and dont put away in your pockets with out the case i notice when i put my psp away in my pockets with no case  little particles will go inside so try it and you see the difference take it from me i own over 40 psp"s :tup: and welcome to acidmods you will learn a whole lot  :victory:

Offline Dinesy

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: Using Canned Air To Clean Inside Of PSP, Please Help.
« Reply #2 on: June 21, 2010, 09:48:04 AM »
Thanks dude :)
I was wondering more on like how to stop dust from settling inside the PSP faceplate once you have repaired it . . .

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Using Canned Air To Clean Inside Of PSP, Please Help.
« Reply #3 on: June 21, 2010, 10:41:03 AM »
the dust gets in through the nub, button holes, plugs and ports. its imposible to stop it completly, as lobo said all you can do is take precautions not to get any dust in it. compressed air through the dpad or buttons wont hurt none, but may not help much either.

Offline Dinesy

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: Using Canned Air To Clean Inside Of PSP, Please Help.
« Reply #4 on: June 21, 2010, 10:45:17 AM »
I think you have the wrong end of what im trying to say here.
Im talking about taking the faceplate off my brand new PSP 2000 fixing the speakers, then reassembling, would spraying canned air on the LCD and faceplate and quickly reassembling stop the dust from settling inside the faceplate and on the inside of the screen ?  :confused:



Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Using Canned Air To Clean Inside Of PSP, Please Help.
« Reply #5 on: June 21, 2010, 12:52:04 PM »
yes it should if you are quick, but small amounts of dust are still going to get in there through the button holes.

Offline loboplayero

  • hardcore psp modder!!
  • MFH
  • Granny Spanker
  • *
  • Posts: 442
  • Post quality +14/-0
  • Gender: Male
  • specialize in psp led lighting!!
Re: Using Canned Air To Clean Inside Of PSP, Please Help.
« Reply #6 on: June 21, 2010, 01:25:40 PM »
Ok dinsey I get wHat you are trying 2 say just be careful when using the air can you can damage your LCD with exesive presure of air may mess up ur LCD for sample the Psp screen is very thin and too much presure inside the componet may dislocate small parts remember Psp LCD are very small and fragile so for u can understand I'll be making a video for you later on the day so I keep u update

Offline Dinesy

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: Using Canned Air To Clean Inside Of PSP, Please Help.
« Reply #7 on: June 21, 2010, 02:28:33 PM »
Thank you so much dude :)
+ Check your pm btw :D

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal