Author Topic: Rapid fire Xbox 360 mod [Help]  (Read 1121 times)

Offline xXORAnG3Xx

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Rapid fire Xbox 360 mod [Help]
« on: July 17, 2010, 01:42:17 AM »
Ok so i have purchased this rapid fire chip for 10 bucks for my controller but i don't know if my controller is compatible with this mod.
The controller is from a xbox 360 elite and it does not have the resistor on the top of the mobo.. it's located at the bottom instead of the top..

So well am i out of luck?

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Rapid fire Xbox 360 mod [Help]
« Reply #1 on: July 17, 2010, 03:27:45 AM »
Hi

Do you have the diagrams of your kit? First you have to know wich controller do you have. Try with this:

https://www.acidmods.com/forum/index.php/topic,24699.0.html

If is from a Xbox 360 elite maybe would be a CG controller.

Normally all kits works with all controller the only difference its the instalation. Talk with your seller he should give you the diagrams.

Hope this help you

Offline xXORAnG3Xx

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Rapid fire Xbox 360 mod [Help]
« Reply #2 on: July 17, 2010, 04:38:33 AM »
i have a CG controller.. and i found a video on how to wire it.. much thanks for the controller identification link! :tup:

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Rapid fire Xbox 360 mod [Help]
« Reply #3 on: July 17, 2010, 04:47:19 AM »
Ok, you are welcome. When you need help only ask. There is always someone who can help you  :hifive:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal