Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Don't take the Wifi Switch for this, or desoldering all the switch make a bridge on the mobo pin for always ON Wifi, and glu backwards the wifi Switch, after this operation you can use the Wifi Switch for your Diagrams.If you don't make this the wifi Switch give you a general Ground , and it's not good for that you want to do.If you don't understand I take Pic after Work.(Sorry I'm French and I have some difficult to speak a good english)Post Merge: April 26, 2010, 05:17:11 AMHere the MOD you must do to use the Wifi Switch for your diagrams:desoldering the switchSolder a bridge between the two PIN closest (for Always activate Wifi)Solder two Wire on the SwitchAnd glue the Switch like thisBe carefull the switch pin and the bridge should not touch.