« previous next »
Pages: [1]   Go Down

Author Topic: Wanting to do a new project and need your help!  (Read 2039 times)

Offline xSLICKVICx

  • King of the Wii-tards
  • *
  • Posts: 160
  • Post quality +0/-0
Wanting to do a new project and need your help!
« on: October 13, 2010, 07:09:25 PM »
Hey guys im wanting to do an ABXY led mod which i already know how to do, but i want it to be switched on and off by my command using the sync button. Is this possible? if so some help would be appreciated. Thanks :tup:
Logged

Offline eNeRGy

  • BioLogic Mods
  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
Re: Wanting to do a new project and need your help!
« Reply #1 on: October 13, 2010, 07:16:08 PM »
it is possible but I personally havent done it. you could add a button between the wires to the LED's so that onece pushed they are on and then on the second push they turn off.
Logged
..::BioLogic Mods::..
__"Why play fair?"__

Offline xSLICKVICx

  • King of the Wii-tards
  • *
  • Posts: 160
  • Post quality +0/-0
Re: Wanting to do a new project and need your help!
« Reply #2 on: October 13, 2010, 07:25:35 PM »
and how would that go?
Logged

Offline bozoy

  • Registered BST
  • Ω Allumnist Ω
  • *
  • Posts: 109
  • Post quality +1/-0
  • Gender: Male
  • Baboon Sniffer
Re: Wanting to do a new project and need your help!
« Reply #3 on: October 13, 2010, 10:27:50 PM »
he meAns taking an alternate button and placing it in the main power. Can't remember what the buttons are called though so I'd search it up if I wasn't on my iphone. U can drill a hole (just like rapid fire mod) ontop of the controller (where the sync button is but to the right more) and mount it there, connect wires from power to the button then the rest to the LEDs.(easily done with som bread board)
                       
« Last Edit: October 13, 2010, 10:30:33 PM by bozoy »
Logged
2nd Year EE

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Wanting to do a new project and need your help!
« Reply #4 on: October 14, 2010, 04:21:44 AM »
he is wanting to use the sinc button to turn his leds on and off.

use topbuzz led flaser (look in the open source section)
or, I think you can acomplish this using a series of transistors.
Logged

Offline xSLICKVICx

  • King of the Wii-tards
  • *
  • Posts: 160
  • Post quality +0/-0
Re: Wanting to do a new project and need your help!
« Reply #5 on: October 15, 2010, 07:21:58 PM »
thats actually a great idea to use that led flasher. Can anyone edit that hex code to just make it a 2 mode to turn it on and off?
Logged

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: Wanting to do a new project and need your help!
« Reply #6 on: October 16, 2010, 12:25:24 PM »
If you have an extra PIC12F683 you can get the ABYX flasher code. mode 1 is all on :)

Here is the discussion thread for the ABYX flasher. link
« Last Edit: October 16, 2010, 12:27:24 PM by Anonamous »
Logged

Offline xSLICKVICx

  • King of the Wii-tards
  • *
  • Posts: 160
  • Post quality +0/-0
Re: Wanting to do a new project and need your help!
« Reply #7 on: October 16, 2010, 02:35:14 PM »
Quote from: Anonamous on October 16, 2010, 12:25:24 PM
If you have an extra PIC12F683 you can get the ABYX flasher code. mode 1 is all on :)

Here is the discussion thread for the ABYX flasher. link
Ok i dont think you understand so i will explain again. I know that the led flasher has an all on mode, but i really dont want the other flashing modes. So if someone could actually make a code that is similar to that led flasher but with only 2 modes (mode 1- all on, mode 2- all off=) that would help alot.
Logged

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: Wanting to do a new project and need your help!
« Reply #8 on: October 16, 2010, 03:54:54 PM »
Quote from: xSLICKVICx on October 16, 2010, 02:35:14 PM
Ok i dont think you understand so i will explain again. I know that the led flasher has an all on mode, but i really dont want the other flashing modes. So if someone could actually make a code that is similar to that led flasher but with only 2 modes (mode 1- all on, mode 2- all off=) that would help alot.

I understood what you meant. It wa just a suggestion lol
Logged

Offline xSLICKVICx

  • King of the Wii-tards
  • *
  • Posts: 160
  • Post quality +0/-0
Re: Wanting to do a new project and need your help!
« Reply #9 on: October 17, 2010, 03:38:03 AM »
Hey guys since i dont have experience in making my own code, i will just stick with the flasher that Top made. Thanks to all who tried to help.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal