« previous next »
Pages: [1]   Go Down

Author Topic: Internal Battery matrix  (Read 1524 times)

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Internal Battery matrix
« on: November 01, 2010, 11:05:14 AM »
hi

does anyone know were to solder on the matrix pad for the Internal Battery mod i have the charger and battery but on phantoms pics they don't show much on the pin outs.
Logged
come to the rite place if you kiss admins as they promote you to admin.

Offline Phantom

  • Club AM VIP
  • Granny Spanker
  • *
  • Posts: 355
  • Post quality +11/-1
  • Gender: Male
Re: Internal Battery matrix
« Reply #1 on: November 01, 2010, 04:34:51 PM »
You just need to solder the wires from your new battery to the + and - where the battery springs connect to the controller
Logged

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Internal Battery matrix
« Reply #2 on: November 01, 2010, 04:39:08 PM »
but will that work with the mini usb when installed so i can charge it
Logged
come to the rite place if you kiss admins as they promote you to admin.

Offline Phantom

  • Club AM VIP
  • Granny Spanker
  • *
  • Posts: 355
  • Post quality +11/-1
  • Gender: Male
Re: Internal Battery matrix
« Reply #3 on: November 01, 2010, 04:44:48 PM »
yep, if you connect the output of your charger to that battery
Logged

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Internal Battery matrix
« Reply #4 on: November 01, 2010, 04:50:30 PM »
how would that go then cos i dont know the pinouts of this l0rdnic0 is gona look out for the help i need but if i had the pinouts for the usb to the charger mb to the pad mb
Logged
come to the rite place if you kiss admins as they promote you to admin.

Offline Phantom

  • Club AM VIP
  • Granny Spanker
  • *
  • Posts: 355
  • Post quality +11/-1
  • Gender: Male
Re: Internal Battery matrix
« Reply #5 on: November 01, 2010, 05:03:17 PM »
You connect your battery to the + and - on the mobo, then the wires coming from your charger go to those points as well, so you will have the battery and your charger connected to the 2 same points.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal