« previous next »
Pages: [1]   Go Down

Author Topic: How To Internalize your xbox wireless adater tut.  (Read 2452 times)

Offline DARk_ANGEL

  • Acidmods Rocks!!!
  • E = MC²
  • *
  • Posts: 322
  • Post quality +5/-0
  • Gender: Male
How To Internalize your xbox wireless adater tut.
« on: November 04, 2010, 05:45:08 PM »
i was looking on howto do this and finally did it my self and it works.

things you need
* wire
* solder and a 15watt is wat i used
* a dubble sided usb wire
* (need to open your xbox) and wireless adapter optional but maks more room


cut the dubble sided usb and there should be 4 wires. A red,green,black and white.

where you would usually put the wireless adapter(on the top left of your xbox. right by the av cords) you need to take the metal piece off. and there should be 5 pins the first one is not going to be used. the second one your going to solder your black wire your second pin your going to solder your green wire. the 3rd pin your going to solder your white wire and the last pin your going to solder your red.

then you would just connect the usb to the wireless adapter and your done.

dont know how to put pics directly on the site... so i googled some
also this youtube video can help

wireless network adapter for xbox 360 mod

http://www.google.com/imgres?imgurl=http://www.xbox360-hacks.com/images/xbox360_inside4.jpg&imgrefurl=http://www.hardwarecanucks.com/forum/reviews-articles-web/29986-possible-new-xbox-360-way-hardocp.html&usg=__5LeoimVvSMbF8NVF4cCIPCOMD_E=&h=812&w=1024&sz=243&hl=en&start=8&zoom=1&tbnid=lTAxTHFjW-SP-M:&tbnh=120&tbnw=150&prev=/images%3Fq%3Dopened%2Bxbox%2B360%26hl%3Den%26biw%3D998%26bih%3D552%26gbv%3D2%26tbs%3Disch:10%2C166&itbs=1&ei=F1LTTPGaE4WKlweC9OyMBQ&biw=998&bih=552&iact=rc&dur=312&oei=EVLTTIKZMYP68AajsvGeDw&esq=2&page=2&ndsp=15&ved=1t:429,r:1,s:8&tx=91&ty=39
Logged

Offline HiddenVenom

  • Gone 'shopping
  • Acid Modder
  • *
  • Posts: 835
  • Post quality +2/-0
  • Gender: Male
  • Photoschlop.
    • Star Legion
Re: How To Internalize your xbox wireless adater tut.
« Reply #1 on: November 05, 2010, 01:16:36 PM »
What is the range on this? Are you using tha antenna supplied with the wireless adapter?
Logged

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: How To Internalize your xbox wireless adater tut.
« Reply #2 on: November 05, 2010, 01:37:15 PM »
if you take the wifi adapter apart and just solder the to the usb pins on the inside then wire the antenna through the a lil hole in the plastic and your done as long as wire is on your antenna points you'll get a signal
Logged
come to the rite place if you kiss admins as they promote you to admin.

Offline HiddenVenom

  • Gone 'shopping
  • Acid Modder
  • *
  • Posts: 835
  • Post quality +2/-0
  • Gender: Male
  • Photoschlop.
    • Star Legion
Re: How To Internalize your xbox wireless adater tut.
« Reply #3 on: November 06, 2010, 01:37:03 AM »
So yes, the original antenna is used.
Logged

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: How To Internalize your xbox wireless adater tut.
« Reply #4 on: November 06, 2010, 04:40:58 AM »
yes and you can see it a lil bit in the vid
Logged
come to the rite place if you kiss admins as they promote you to admin.

Offline DARk_ANGEL

  • Acidmods Rocks!!!
  • E = MC²
  • *
  • Posts: 322
  • Post quality +5/-0
  • Gender: Male
Re: How To Internalize your xbox wireless adater tut.
« Reply #5 on: November 06, 2010, 07:05:03 PM »
yea just wire it and its good connection too. i play cod mw2 with no prob.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal