Author Topic: Sound reactive rumble problem  (Read 971 times)

Offline flasher

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Sound reactive rumble problem
« on: December 18, 2010, 01:54:17 PM »
Hey guys

I just can't get this working.
https://www.acidmods.com/forum/index.php/topic,35291.msg285090.html#msg285090

These are the parts I used:
- 2N2222 H331 transistor
- 220 Ohm 0.25w Carbon 1/4w Resistor 220R
- Silicon Rectifier Diode 1N4001 1A 50V DO-41 RoHS

When I use a rumble motor, the voltage is always 0.47/0.48
When I use a led, the voltage is always 3.45
Even when there's no sound. So it seems that the voltage depends on the "consumer".

Checked the emitor and collector with a DMM, so I'm sure I ain't wiring it wrong. I even used a crocodile clip as heat sink while soldering so the transistor doesn't get damaged due to the heat.

Also tried the other way of Ghost_Death, but then I don't even get any voltage at all.

So I'm guessing I need other transistors? Or could I also do this with an LM386 chip?

Sorry for my bad English btw.
« Last Edit: December 18, 2010, 02:06:10 PM by flasher »

Offline K.A.O.

  • E = MC²
  • *
  • Posts: 333
  • Post quality +4/-0
  • Gender: Male
  • Acidmods User
Re: Sound reactive rumble problem
« Reply #1 on: December 20, 2010, 04:13:43 PM »
oh my god. i though i was the only one with with this problem! because i asked alot of people and they say these work... well they didnt for me and i just gave up on it.  :cry2:

Offline flasher

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Sound reactive rumble problem
« Reply #2 on: December 21, 2010, 12:06:50 PM »
You should read the topic I linked, FOOKz is helping me out :)

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal