Author Topic: "War Machine" Xbox 360 Controller (Read 15920 times)

crazy-modder · « **on:** December 22, 2010, 10:09:02 PM »

I made this controller for my little brother for Christmas. He better like it lol, took me forever....
Its got my 6 mode rapid fire, 9mm casings as the abxy buttons, red leds and a paint job that took way to damn long to do.

FOOKz™ · « **Reply #1 on:** December 22, 2010, 10:19:52 PM »

We have to go tell

about this situation.

This is an emergency!

you could probably easily sell that for $110+

crazy-modder · « **Reply #2 on:** December 22, 2010, 10:21:54 PM »

LOL yeah, i showed a couple friends of mine on aim...they offered me $160 for it but i cant sell it because i gotta turn it over to my bro on Christmas. Im definitely gonna make more like this one, its so bad ass!!

loboplayero · « **Reply #3 on:** December 22, 2010, 10:22:24 PM »

wow g6 quality man!!! nice work!

Sammy · « **Reply #4 on:** December 22, 2010, 10:42:26 PM »

that thing is awesome!! could you do somthin like this for ps3? lol jk, how much did it cost to do alll of it?

nEoVaLoR · « **Reply #5 on:** December 22, 2010, 10:51:02 PM »

Quote from: crazy-modder on December 22, 2010, 10:09:02 PM

I made this controller for my little brother for Christmas. He better like it lol, took me forever....
Its got my 6 mode rapid fire, 9mm casings as the abxy buttons, red leds and a paint job that took way to damn long to do.

For the buttons did you sand away the stock buttons and stick the 9mm casings over them, or did you use just the casings and filled them with something, I'm really Intrigued by this.

BTW i would kill somebody for your painting skizzles.

frenulem - No.5417 · « **Reply #6 on:** December 23, 2010, 03:08:09 AM »

should do the shotgun shell D-pad with this

nice work tho i love it, your an awesome big brother

lovey · « **Reply #7 on:** December 23, 2010, 03:46:28 AM »

wow that is sick if ya little bro dont like i'll have it lol nice work dude

laxboy · « **Reply #8 on:** December 23, 2010, 04:14:37 AM »

crazy your controllers always seem to amaze me from that orange one now this its just pure amazing. I think he will love it. Merry Christmas

robin1989 · « **Reply #9 on:** December 23, 2010, 04:42:38 AM »

Thats awesome. Great work. You should do a green hornet one next.

crazy-modder · « **Reply #10 on:** December 23, 2010, 04:44:00 AM »

Thanks guys! yeah he better like this damn thing lol. I just used the casings and filled them with hot glue. But cutting the original buttons and using the bottoms is a really good idea too. Ill try that on my next one. I was gonna do the 12g dpad and a 30-30 center button but im flying home today for Christmas and wouldn't have enough time to do it. Definitely going to do it on my next one though!

Merry Christmas everyone!!!

jrfhoutx · « **Reply #11 on:** December 23, 2010, 06:10:35 AM »

Very nicely done crazy. Personally I prefer to use just the casings and fill them with hot glue, it works far better than cutting and sanding down the stock buttons with less chance of coming out crooked. The method you used is probably the same one that I use. 9mm buttons definitely go very well with the 12gauge dpad.

As for the 30-30 guide button I will warn you that a 30-30 is not the best size to use go the guide button. The guide button is actually bigger than a 30-30. There is a shell that is the perfect size for the guide but they're not common an quite hard to find, though off hand I can't remember what it is. The only time I've seen the guide done was with a 30-30 and all the guy did was cut the cap off a 30-30 and glue it tithe top of a guide button. Like with the ABXY, I don't recommend this method.

I am currently working on a tut for the 9mm ABXY buttons (it got held up while I was looking for methods to improve the process of cutting the tabs for the casings, but it is coming soon hopefully...

crazy-modder · « **Reply #12 on:** December 23, 2010, 06:44:38 AM »

Ive already made a 30-30 guide button. All you do is cut the top off of the X guide button and the 30-30 shell slides right inside. I painted the green part of the guide button black so all you see is the top of the 30-30 casing, it turned out very nice.

Anonamous · « **Reply #13 on:** December 23, 2010, 07:28:37 AM »

OMG WOW!!! that is

AMAZING.

jrfhoutx · « **Reply #14 on:** December 23, 2010, 09:01:33 AM »

There're always more ways than one to accomplish a goal. Personally I'm looking for a shell to replace the button without having to mod the stock button. I like having the ability to return the controller to stock, so I don't like to cut up my stock buttons. Besides, I think it looks cleaner when the shells are all that's used, but to each his own.

Rodent · « **Reply #15 on:** December 23, 2010, 09:06:08 AM »

Awsome JoB! I have been so busy lately havent finished any of mine mods yet . Hope to right after christmas . NIce work

budgray19 · « **Reply #16 on:** December 23, 2010, 10:37:54 AM »

im surprised no one has had teh idea of using .50 bmg shells for d pad or something. im not sure what the diameter for the shell is i only know that the bullet is 12.7mm

Rodent · « **Reply #17 on:** December 23, 2010, 12:56:36 PM »

Quote from: budgray19 on December 23, 2010, 10:37:54 AM

im surprised no one has had teh idea of using .50 bmg shells for d pad or something. im not sure what the diameter for the shell is i only know that the bullet is 12.7mm

12.7mm= 1/2inch diameter which would be.50 bmg shell

12.7mm divided by 25.4 just incase no one knew that

crazy-modder · « **Reply #18 on:** December 25, 2010, 09:25:09 AM »

Lol Well i gave it to my brother today and he was like OMGGGGGGGGGGGGG HOLY SHIZZZZZ

laxboy · « **Reply #19 on:** December 25, 2010, 09:38:25 AM »

I would be to if i found that very well done crazy very well done

aZiZ1 · « **Reply #20 on:** December 25, 2010, 12:21:47 PM »

very good job on the controller.

Anonamous · « **Reply #21 on:** December 28, 2010, 11:21:58 AM »

wait. so all you did was fill the empty 9mm shells with hot glue????? holy

thats easy. im so gonna do that.

crazy-modder · « **Reply #22 on:** December 28, 2010, 11:42:53 AM »

Lol yup, you have to cut them to size too. The 9mm casings are longer than the actual abxy buttons. So take a marker and mark where to cut, you also have to cut the notch in the 9mm casing so it doesnt fall out of the hole.

Anonamous · « **Reply #23 on:** December 28, 2010, 12:09:56 PM »

ok. what did you use to cut the casings? Also, where did you get them lol

jrfhoutx · « **Reply #24 on:** December 28, 2010, 12:47:28 PM »

I have a 9mm abxy tut coming this weekend. I just have to watermark the images.

As for cutting the casings, I use a dremel to trim them down and cut the tabs. I use a butane torch to heat the casing before bending the tabs (otherwise they break easily). Use your original abxy buttons to make a template so you can mark the correct position for th tabs.

I get my casings from my in-laws (they all carry 9mm for their conceal and carry.

crazy-modder · « **Reply #25 on:** December 28, 2010, 05:50:31 PM »

I bought 1000 casings from www.gunbroker.com for like $25

Famas · « **Reply #26 on:** December 28, 2010, 05:57:35 PM »

thats the best pad ever crazy just wondering if you can help me with a rf issue want to use ure six mode code just wondering if you could take the burst modes off and make it a 3 mode black ops code as i want to use it on the sync if you have the asm id like to test some speeds as me ebay stuff keeps freezing

rafaliyo86 · « **Reply #27 on:** December 29, 2010, 12:23:48 AM »

Quote from: crazy-modder on December 28, 2010, 05:50:31 PM

I bought 1000 casings from www.gunbroker.com for like $25

wow crazy this mod is awasome!!! I have a question whats the casing you bought exactly?? Do you know where i can buy it with shipment to Spain?? Here in my country its difficult to buy it

jrfhoutx · « **Reply #28 on:** December 29, 2010, 05:49:44 AM »

Any 9mm casing will work.

Anonamous · « **Reply #29 on:** December 29, 2010, 10:56:08 AM »

ok. well im gonna sound stupid here but. Its not the actual entire thing used correct? its just the shell after the round has been fired right lol.

News:

Author Topic: "War Machine" Xbox 360 Controller (Read 15920 times)