Author Topic: Help with modding please  (Read 11729 times)

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Help with modding please
« on: January 07, 2011, 11:52:44 AM »
Hi everyone

I'm looking to get into making Rapid fire controllers for both the ps3 and xbox 360. I could do with a little advice though

Heres a few quick points

- I have already bought Rosin Core Solder and Kynar wire. Also some leds. Are the leds the hardest thing to do like many people say?

-I have no pics(microchips)as of yet. Where can I get the pre programmed and blank microchips at the best price?

-Is there a guide on here on how to program them and a hex code too?

-Any other place where cheap controllers can be obtained

As I said in introducing myself I hope to become very active on this Forum. Please think of me as a noob rather than a leecher

Any advice is greatly appreciated 

Offline HiddenVenom

  • Gone 'shopping
  • Acid Modder
  • *
  • Posts: 835
  • Post quality +2/-0
  • Gender: Male
  • Photoschlop.
    • Star Legion

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #2 on: January 07, 2011, 05:06:42 PM »
You might find what you need here:

https://www.acidmods.com/forum/index.php/board,327.0.html

and here

https://www.acidmods.com/forum/index.php/board,389.0.html

:D


Thanks for that  :tup:. I have a better understanding of what I need now. Where can I buy a usb powered pic programmer for a laptop? And is there anyone here that would send me the hex code for a  8 mode stealth chip?

Any noob tuturials here on how to program a pic from scatch? Also if someone could make a list of what programs i need to to this

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: Help with modding please
« Reply #3 on: January 07, 2011, 05:14:23 PM »
a very good easy to use usb programmer is a pickit 2, its well worth the money imo and it will work with a laptop

for hex codes you are probably best off checking out the acidmods free code list in the open source and free code section
i recomend the flex code for 360

as for what programs you need it depends on what code you are using and what programmer you have

im not sure if there are any specific guides as the process varies some what but if you need any help just post here and myself or others will help you out

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Help with modding please
« Reply #4 on: January 07, 2011, 05:16:10 PM »

Thanks for that  :tup:. I have a better understanding of what I need now. Where can I buy a usb powered pic programmer for a laptop? And is there anyone here that would send me the hex code for a  8 mode stealth chip?

Any noob tuturials here on how to program a pic from scatch? Also if someone could make a list of what programs i need to to this

Heres a tut on making your own programmer that i have used when i first got started, and save money and learned alot making it myself. Thanks to the guys at AM

https://www.acidmods.com/forum/index.php/topic,22283.0.html

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #5 on: January 08, 2011, 11:08:47 AM »
Heres a tut on making your own programmer that i have used when i first got started, and save money and learned alot making it myself. Thanks to the guys at AM

https://www.acidmods.com/forum/index.php/topic,22283.0.html

Thanks..Is there a video on how to put it together? Is it basically just kynar wire and ohms soldered to it? What is the object in the far right that everythings connected to? Does annyone sell them premade on this forum?

Offline FOOKz™

  • Hardware Modder
  • Research & Development
  • E = MC² Mad Scientist
  • *
  • Posts: 2070
  • Post quality +37/-2
  • Electronics Expert Electrical Engineer
Re: Help with modding please
« Reply #6 on: January 08, 2011, 11:53:18 AM »
Thanks..Is there a video on how to put it together? Is it basically just kynar wire and ohms soldered to it? What is the object in the far right that everythings connected to? Does annyone sell them premade on this forum?

I can make you a video if you really want one. ~ It needs a video.

Follow my Instagram and subscribe to my YouTube

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Help with modding please
« Reply #7 on: January 08, 2011, 12:12:29 PM »
There is a step by step pictures, really its self explanitory. but i guess a video would make sence on maybe the programming part.

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #8 on: January 08, 2011, 12:20:14 PM »
do you want some friendly advice buy a pic kit form microchip there on ebay and they use a usb port :)

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #9 on: January 08, 2011, 02:58:49 PM »
I can make you a video if you really want one. ~ It needs a video.

Please theres no need to go to that amount of trouble for me! If you could make a fools guide on how to do it step by step that would be more than enough..Thanks very much :D

Post Merge: January 08, 2011, 03:05:39 PM
do you want some friendly advice buy a pic kit form microchip there on ebay and they use a usb port :)

Thanks. Something like this that posts to Ireland http://cgi.ebay.com/PIC-Programmer-Kit-149-40-ZIF-USB-Microchip-kit2-USA-/360329434101?pt=LH_DefaultDomain_0&hash=item53e54ed3f5#ht_2436wt_958
« Last Edit: January 08, 2011, 03:05:39 PM by VesHo »


Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #11 on: January 08, 2011, 04:29:01 PM »
here friend


http://cgi.ebay.co.uk/9-Pins-ZIF-40-Microchip-PIC-Programming-Programmer-Kit-/170581374110?pt=UK_BOI_Electrical_Test_Measurement_Equipment_ET&hash=item27b771349e


Thanks but is there a Usb one for a laptop? My parents just got a new hdd in their vista desktop and I don't think they would appreciate me using it for that purpose :sadno: Is there any thing else i need to get in addition to that in hardware terms? And a list of programs please :)

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #12 on: January 08, 2011, 04:35:35 PM »
pic 12f683  and winpic i think  win pic is a program

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #13 on: January 08, 2011, 04:58:51 PM »

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: Help with modding please
« Reply #14 on: January 08, 2011, 05:22:23 PM »
yes they are fine the picture is not accurate

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Help with modding please
« Reply #15 on: January 09, 2011, 02:51:21 AM »
pic 12f683  and winpic i think  win pic is a program

Heres some links
http://www.winpic800.com/index.php?lang=en

http://www.microchip.com/

http://www.electronics-lab.com/downloads/mcu/001/index.html


Hope this helps also can google digi-key or mouser electronics for chips

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #16 on: January 09, 2011, 05:09:17 AM »
ill also say get some dil sockets make life harder but worth it

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #17 on: January 09, 2011, 07:55:03 AM »
ill also say get some dil sockets make life harder but worth it
:confused: umm what are they?

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #18 on: January 09, 2011, 07:58:08 AM »
chip sockets so you can update the chip without se soldering anything

Offline crazy-modder

  • Research & Development
  • Acid Modder
  • *
  • Posts: 854
  • Post quality +34/-2
  • Gender: Male
Re: Help with modding please
« Reply #19 on: January 09, 2011, 07:58:52 AM »
I get all my chips from Newark.com

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #20 on: January 09, 2011, 07:59:53 AM »
sorry crazy hes uk (ireland mate)

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #21 on: January 09, 2011, 09:43:52 AM »
chip sockets so you can update the chip without se soldering anything

Oh so say i cant sell some chips and they have the 8 mode rapid fire. If I have the chip socket i can change them to another program like 11 mode?

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #22 on: January 09, 2011, 09:47:40 AM »
if its the same diagram yea what codes do you have?

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #23 on: January 10, 2011, 11:14:42 AM »
if its the same diagram yea what codes do you have?

none as of yet...do you have the codes for an 8 mode stealth? them seem to be quite popular

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #24 on: January 10, 2011, 11:32:05 AM »
topbuzz has an 8 mode code and also crazy has a six mode

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #25 on: January 10, 2011, 02:34:11 PM »
topbuzz has an 8 mode code and also crazy has a six mode

Do I just email them and ask for the codes?

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #26 on: January 10, 2011, 02:50:08 PM »
hi friend ill get you the codes list hold on a tick

Post Merge: January 10, 2011, 02:51:34 PM
https://www.acidmods.com/forum/index.php/topic,37478.0.html
« Last Edit: January 10, 2011, 02:51:34 PM by Famas »

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #27 on: January 11, 2011, 09:48:39 AM »
hi friend ill get you the codes list hold on a tick

Post Merge: January 10, 2011, 02:51:34 PM
https://www.acidmods.com/forum/index.php/topic,37478.0.html

Great :) thanks so much! which one do you recommend for ps3 and what modes does it have? Also which one on that list is 8 mode stealth?

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #28 on: January 11, 2011, 03:21:56 PM »
hyper 999 code is ps3 theres a couple on there topbuzz isnt stealth but mor funtional if you want a code that stealth with lots of modes there a 10 mode and a 18 mode that are stealth  on this site just search it

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #29 on: January 12, 2011, 02:55:37 PM »
hyper 999 code is ps3 theres a couple on there topbuzz isnt stealth but mor funtional if you want a code that stealth with lots of modes there a 10 mode and a 18 mode that are stealth  on this site just search it

Thanks for that mate :) I'd preffer the 8 mode because they are the most searched for rapid fire product. Which in your opinion is the best?

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: Help with modding please
« Reply #30 on: January 12, 2011, 03:03:56 PM »
just to let you know these codes are for personal use only...

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #31 on: January 12, 2011, 03:13:03 PM »
i have a 7 mode code you can have NOT WRITTEN BY ME

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Help with modding please
« Reply #32 on: January 12, 2011, 03:13:14 PM »
here is an old tut...it covers the basics and uses a 3 mode code. read the tut and use the hex AND wiring for the code u want.

remember the wiring can always and usually are difrent depending on which code u use.

https://www.acidmods.com/forum/index.php/topic,29999.0.html

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #33 on: January 14, 2011, 11:42:05 AM »
here is an old tut...it covers the basics and uses a 3 mode code. read the tut and use the hex AND wiring for the code u want.

remember the wiring can always and usually are difrent depending on which code u use.

https://www.acidmods.com/forum/index.php/topic,29999.0.html

Great thanks I'll start writing my own code!

Post Merge: January 14, 2011, 11:44:15 AM
i have a 7 mode code you can have NOT WRITTEN BY ME

Great! Could you send it on to me? I just want to try a few different ones out
« Last Edit: January 14, 2011, 11:44:15 AM by VesHo »

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Help with modding please
« Reply #34 on: January 14, 2011, 11:45:20 AM »
tell me how many modes you want speed on each and ill sort you  out

Offline VesHo

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with modding please
« Reply #35 on: January 14, 2011, 11:47:35 AM »
just to let you know these codes are for personal use only...

Thats fine I wont use them in any products I sell

Post Merge: January 14, 2011, 11:52:41 AM
tell me how many modes you want speed on each and ill sort you  out

I'm not too fussy now :D

First Mode: 8 Shots a Second- Dual Trigger

Second Mode: 12 Shots a Second- Dual Trigger-

Third Mode: 25 Shots a Second- Dual Trigger

Fourth Mode: 7 Shots a Second- Right Trigger-The Waw mode

Fifth Mode: 8 Shots a Second-

Sixth Mode: 11 Shots a Second

Seventh Mode: 12 Shots a Second

Eighth Mode: 25 Shots a Second-

Is that okay?
« Last Edit: January 14, 2011, 11:52:41 AM by VesHo »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal