« previous next »
Pages: [1]   Go Down

Author Topic: RROD help 0110->0020->0110  (Read 4318 times)

Offline whuthefxk

  • King of the Wii-tards
  • *
  • Posts: 181
  • Post quality +1/-0
  • Gender: Male
RROD help 0110->0020->0110
« on: January 15, 2011, 04:17:31 PM »
so ive been getting 0110 then a 0020 then it goes back and forth? i reballed the ram with leaded and sometimes when the heatsink was looser, it was 0020, but when it was tighter it was 0110? i reflowed both of them with my workstation?  any ideas?

thanks
Logged
MY CONSOLE LIST:

-1 PS   )                -1 GameCube
-1 PS2 (fa              -2 OG Gameboys
-1 PS2 (slim           -2 color gameboys -1 PS3                   -1 GBA -5 PSP                   -1 Gameboy SP -1 iPod TOUCH                   -2 NDS w/r4 -1 iPod video 5g                 -1 Wii -1 iPod nano (2-1g)(1-3g)    -1 Sega Genisis -2 NES                             -1 Atari Lynx -1 Gameboy micro

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: RROD help 0110->0020->0110
« Reply #1 on: January 15, 2011, 05:02:05 PM »
Quote from: whuthefxk on January 15, 2011, 04:17:31 PM
so ive been getting 0110 then a 0020 then it goes back and forth? i reballed the ram with leaded and sometimes when the heatsink was looser, it was 0020, but when it was tighter it was 0110? i reflowed both of them with my workstation?  any ideas?

thanks

you reballed the RAM??? I thought you were supposed to reball the GPU. I have ideas but it depends on what you actually did lol
Logged

Offline whuthefxk

  • King of the Wii-tards
  • *
  • Posts: 181
  • Post quality +1/-0
  • Gender: Male
Re: RROD help 0110->0020->0110
« Reply #2 on: January 15, 2011, 05:16:53 PM »
it originally just had 0110. i have a hot air rework station and i dont have a nozzle big enough to reball the gpu. to reflow gpu i used a heatgun
Logged
MY CONSOLE LIST:

-1 PS   )                -1 GameCube
-1 PS2 (fa              -2 OG Gameboys
-1 PS2 (slim           -2 color gameboys -1 PS3                   -1 GBA -5 PSP                   -1 Gameboy SP -1 iPod TOUCH                   -2 NDS w/r4 -1 iPod video 5g                 -1 Wii -1 iPod nano (2-1g)(1-3g)    -1 Sega Genisis -2 NES                             -1 Atari Lynx -1 Gameboy micro

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: RROD help 0110->0020->0110
« Reply #3 on: January 15, 2011, 05:22:01 PM »
Quote from: whuthefxk on January 15, 2011, 05:16:53 PM
it originally just had 0110. i have a hot air rework station and i dont have a nozzle big enough to reball the gpu. to reflow gpu i used a heatgun

oh. I honestly dont know too much about error codes so I couldnt help you. sorry :(
Logged

Offline crazy-modder

  • Research & Development
  • Acid Modder
  • *
  • Posts: 854
  • Post quality +34/-2
  • Gender: Male
Re: RROD help 0110->0020->0110
« Reply #4 on: January 15, 2011, 06:18:14 PM »
0110 is a horrible error code to get. You are right on reballing the ram, but there are so many of them its just a pain in the ass to figure out which one it could be causing the problem. You can get a 4141 nozzle for around $20. And it pays itself off very quick if you know how to use a rework station. I just fixed an xbox with a 0020 error code and all i did was reball the cpu and the gpu and it runs like a champ.
Logged

Offline whuthefxk

  • King of the Wii-tards
  • *
  • Posts: 181
  • Post quality +1/-0
  • Gender: Male
Re: RROD help 0110->0020->0110
« Reply #5 on: January 15, 2011, 06:37:56 PM »
yea i was looking into the 4141 nozzle but do u know if that wuld fit the chips for PS3 gpu and cpu also? im kind of trying to use it possibly for pps3 also.   
Logged
MY CONSOLE LIST:

-1 PS   )                -1 GameCube
-1 PS2 (fa              -2 OG Gameboys
-1 PS2 (slim           -2 color gameboys -1 PS3                   -1 GBA -5 PSP                   -1 Gameboy SP -1 iPod TOUCH                   -2 NDS w/r4 -1 iPod video 5g                 -1 Wii -1 iPod nano (2-1g)(1-3g)    -1 Sega Genisis -2 NES                             -1 Atari Lynx -1 Gameboy micro

Offline crazy-modder

  • Research & Development
  • Acid Modder
  • *
  • Posts: 854
  • Post quality +34/-2
  • Gender: Male
Re: RROD help 0110->0020->0110
« Reply #6 on: January 15, 2011, 07:33:58 PM »
Im not exactly sure, but i bet it would.
Logged

Offline whuthefxk

  • King of the Wii-tards
  • *
  • Posts: 181
  • Post quality +1/-0
  • Gender: Male
Re: RROD help 0110->0020->0110
« Reply #7 on: January 15, 2011, 07:43:21 PM »
so i was getting a 0020 at first and just heated up the GPU and now its back to 0110   ....sigh
Logged
MY CONSOLE LIST:

-1 PS   )                -1 GameCube
-1 PS2 (fa              -2 OG Gameboys
-1 PS2 (slim           -2 color gameboys -1 PS3                   -1 GBA -5 PSP                   -1 Gameboy SP -1 iPod TOUCH                   -2 NDS w/r4 -1 iPod video 5g                 -1 Wii -1 iPod nano (2-1g)(1-3g)    -1 Sega Genisis -2 NES                             -1 Atari Lynx -1 Gameboy micro

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: RROD help 0110->0020->0110
« Reply #8 on: January 16, 2011, 04:59:18 AM »
Quote from: whuthefxk on January 15, 2011, 04:17:31 PM
so ive been getting 0110 then a 0020 then it goes back and forth? i reballed the ram with leaded and sometimes when the heatsink was looser, it was 0020, but when it was tighter it was 0110? i reflowed both of them with my workstation?  any ideas?

thanks

Have yo checked the board over reallly good , make sure there isnt any missing componets, I had one where it was missing resistor, and other componets that someone else tryied to fix the RROD, and the mother board was warped and  missing components.

when i Heated the board it let it come back so it wasnt warped as bad but made alot of noise while it was heating, cracking poping etc, went thru the who process to find out componets were missing, went right in the garbage after that.
Logged

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline whuthefxk

  • King of the Wii-tards
  • *
  • Posts: 181
  • Post quality +1/-0
  • Gender: Male
Re: RROD help 0110->0020->0110
« Reply #9 on: January 16, 2011, 10:49:20 AM »
so if some caps or resistors are missing, the thing cant be revived? what if i replaced them?  i hope im not missing anything cuz its an HDMI elite.  oh well if its garbage i only paid 25 for it lol
Logged
MY CONSOLE LIST:

-1 PS   )                -1 GameCube
-1 PS2 (fa              -2 OG Gameboys
-1 PS2 (slim           -2 color gameboys -1 PS3                   -1 GBA -5 PSP                   -1 Gameboy SP -1 iPod TOUCH                   -2 NDS w/r4 -1 iPod video 5g                 -1 Wii -1 iPod nano (2-1g)(1-3g)    -1 Sega Genisis -2 NES                             -1 Atari Lynx -1 Gameboy micro

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: RROD help 0110->0020->0110
« Reply #10 on: January 16, 2011, 11:29:09 AM »
Quote from: whuthefxk on January 16, 2011, 10:49:20 AM
so if some caps or resistors are missing, the thing cant be revived? what if i replaced them?  i hope im not missing anything cuz its an HDMI elite.  oh well if its garbage i only paid 25 for it lol

of course it can be revived, as long as anything wasnt fried as a result of powering on. All you would have to do is replace the component.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal