« previous next »
Pages: [1]   Go Down

Author Topic: Doing my "jrfhoutx" controller  (Read 4319 times)

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Doing my "jrfhoutx" controller
« on: January 22, 2011, 02:12:52 PM »
Well guys when i saw jrfhoutx tutorials about shotgun shells i fell in love it  :dribble:. Now I am doing my own controller.

First I painted my cases (not very well   :confused: lol) and today I have made the new d-pad. Here is a pic:



Now i have to get 9mm for ABXY buttons

I hope you like it  :tup:
Logged

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: Doing my "jrfhoutx" controller
« Reply #1 on: January 22, 2011, 05:35:29 PM »
Very nicely done! Congrats. I hope you enjoy using it. Glad to see the first thread by someone using the tutorial. :)

I have to ask a few questions though (in an effort to improve, correct, and adjust the tutorial where needed), how experienced of a modder are you? Was the tutorial clear enough and easy for you to follow? Do you think the difficulty level and completion times listed are accurate, or do you have a suggestion for changing either one?
Logged
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Doing my "jrfhoutx" controller
« Reply #2 on: January 23, 2011, 03:56:44 AM »
Well, I think I have a medium level doing mods, I have made RF (Xbox 360 and PS3, case mods, leds mods, psp mods.....

I think the tutorial its very good, i followed it and i didnt have problems. About the time, I think its correct moreless. The most difficult step for me was take off plastic inside this



But in my opinion you dont have to change nothing. Thanks for your tut now I just need 9 mm casings to finish the mod. Only one question more. What size would be appropriate for the guide button??
Logged

Offline frenulem - No.5417

  • Ultimate Badass
  • Blogs & Media Team
  • Acid Modder
  • *
  • Posts: 633
  • Post quality +23/-0
  • Gender: Male
  • Learning Pascal Cuz i'm dumb and 'Ting
Re: Doing my "jrfhoutx" controller
« Reply #3 on: January 23, 2011, 06:09:24 AM »
Crazy used the shotgun shell for that
Logged

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Doing my "jrfhoutx" controller
« Reply #4 on: January 23, 2011, 06:54:14 AM »
Wow thwlen i am going to wait if crazy see the topic and post the size
Logged

Offline crazy-modder

  • Research & Development
  • Acid Modder
  • *
  • Posts: 854
  • Post quality +34/-2
  • Gender: Male
Re: Doing my "jrfhoutx" controller
« Reply #5 on: January 23, 2011, 08:06:09 AM »
Hey that's lookin pretty good! I used a 30-30 casing for the guide button. You can get spent casings from www.gunbroker.com
Logged

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: Doing my "jrfhoutx" controller
« Reply #6 on: January 23, 2011, 08:22:15 AM »
Crazy said he's used a 30-30 for the guide I believe, but I don't think the 30-30 is a direct replacement like the 9mm abxy, instead you make a cap and glue it on top of the stock guide button, kind of like you do with the d-pad... I'm still looking for a shell that will fit properly as a direct replacement.



Damn, crazy beat me to it... :)
Logged
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline crazy-modder

  • Research & Development
  • Acid Modder
  • *
  • Posts: 854
  • Post quality +34/-2
  • Gender: Male
Re: Doing my "jrfhoutx" controller
« Reply #7 on: January 23, 2011, 08:34:22 AM »
Lol, yes jr is correct. It is not a direct replacement. You have to cut the top off the original guide button. Then The 30-30 casing slides right in.

@jr I really think a .50 cal shell will fit. I'm gonna try an get ahold of one of my friends I was in the marines with and see if he can get me some .50 cal casings.
« Last Edit: January 23, 2011, 08:37:08 AM by crazy-modder »
Logged

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Doing my "jrfhoutx" controller
« Reply #8 on: January 23, 2011, 09:25:09 AM »
Wow thanls for the info. I think I have a casing wich could works for the guide button

Thanks
« Last Edit: January 23, 2011, 11:23:20 PM by rafaliyo86 »
Logged

Offline crazy-modder

  • Research & Development
  • Acid Modder
  • *
  • Posts: 854
  • Post quality +34/-2
  • Gender: Male
Re: Doing my "jrfhoutx" controller
« Reply #9 on: January 23, 2011, 09:28:33 AM »
9mm casings are a direct fit for the abxy buttons. If anything, they are just a bit smaller than the abxy buttons. Any 9mm casing you find will fit the controller. If you didnt live in spain, i would send you some 9mm casings and some 30-30 casings. I just dont want to go through the hassle of filling out a stupid form for sending a package to another country.
Logged

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Doing my "jrfhoutx" controller
« Reply #10 on: January 23, 2011, 09:47:53 AM »
Dont worry crazy i will find it here. I just say this because people in Spain seems as if they would laugh at you. I have asked in a spanish forum and they only say me that its too big. If you could post a pic it would be fantastic
Logged

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Doing my "jrfhoutx" controller
« Reply #11 on: January 27, 2011, 01:37:47 PM »
Well guys i have made more paint job. hope you like it  :tup:



Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal