Author Topic: i need some art help (Read 8076 times)

Modded Matt · « **on:** January 30, 2011, 05:37:15 PM »

hey guys, could anyone with photo shop change this image to all grey. like the other am icons

edit..
realized alot of u cant see that as they are modorator tags so i will attach what they should look like appart

whitetop · « **Reply #1 on:** January 30, 2011, 06:11:10 PM »

it that ??

Modded Matt · « **Reply #2 on:** January 30, 2011, 06:14:39 PM »

thanks ill post more as i need them.

Modded Matt · « **Reply #3 on:** January 31, 2011, 08:04:33 PM »

this ones a bit tougher its a main sheet. has a series of bars on a white backdrop. i need the backdrop black and the bars rendered another color.
count them from the top down.
1. 000 black
2.
3.
4.
5.
6. acidmods blue fade (the catagory bars)
7. light black like 1c1c1c
8. am blue fade
9. light black

then from there down render it transparent or black 000
leave the blank bars for now
not to be picky but placment and size count and if u zoom wayinu wilee the corners rounded on some bars and square on others mainy bar #9

Modded Matt · « **Reply #4 on:** February 01, 2011, 04:58:22 AM »

anyone?

whitetop · « **Reply #5 on:** February 01, 2011, 05:15:17 AM »

i would but i dont understand that good on what you want as for acidmods blue whats the code for it and i could give it a shot since the photoshop people are not on?

Modded Matt · « **Reply #6 on:** February 01, 2011, 07:02:10 AM »

the am blue is the top two bars at the top of the website, they have a fade effect to them.

whitetop · « **Reply #7 on:** February 01, 2011, 11:37:34 AM »

ive done this but on the bottom part theres to parts going into one do you want that black or transparent

Modded Matt · « **Reply #8 on:** February 01, 2011, 11:54:05 AM »

good start!!
there are 10 bars, then the bottom part which looks like two into one. the bars look good for now, but the whole bottom part should be transparent.

whitetop · « **Reply #9 on:** February 01, 2011, 11:57:37 AM »

so after the black you want the bars transparent but leave the outside back ground the same

Post Merge: February 01, 2011, 12:29:28 PM

transparent and black only both said in the post requesting for it?

Modded Matt · « **Reply #10 on:** February 01, 2011, 02:05:35 PM »

1. 000 black
2. light black
3. light black
4. 000 black
5. black
6. acidmods blue fade (the catagory bars)
7. light black like 1c1c1c
8. am blue fade
9. am blue fade
from 9 down needs to be clear or black all the way down please try to check the edges there seems to be.

then the hole back drop need to change from white to black.

whitetop · « **Reply #11 on:** February 01, 2011, 02:14:19 PM »

will see what i can do nice on changing your mind lol

Modded Matt · « **Reply #12 on:** February 01, 2011, 02:22:23 PM »

lol thats why is called web development, not web building. i still may need to tweek it a bit more.

i appreciate it alot im no good with photoshop. this site just uses a small block image that is repeated. but rc4 is not a repeat, its the full image and since i suck i figured some of u guys would like to help out a bit.

thanks again

whitetop · « **Reply #13 on:** February 01, 2011, 03:06:42 PM »

from what you said.if you want different black background just say.

Modded Matt · « **Reply #14 on:** February 01, 2011, 03:55:10 PM »

sorry dude i confused myself. so i can be clear i have attached the origional with numbers on the bars lol there are 10 bars when i posted it before i had been staring at coding for 6 hours lol.

1. 000 black
2. light black
3. light black
4. 000 black
5. black
6. acidmods blue fade (the catagory bars)
7. light black like 1c1c1c
8. am blue fade
9. am blue fade
10. am blue fade
from 10 down needs to be clear or black all the way down please try to check the edges there seems to be.

also the left of ur image is good but the right side where the curves of the blue bars were at the far end still showed a tip of the old whit bg.

also a question are u using clear or white? is there a setting for clear? i may have to cut this entry and hard code it as transparent cause when i view the clear in it shows white on the site but it m ay be my coding issue.

the color palete ur using looks fine

whitetop · « **Reply #15 on:** February 01, 2011, 11:34:30 PM »

im using clear and sorry about the picture not fully done got abit of rush going on here abit personal so i had to rush it plus 4 days with no sleep lol but ill get this done with in a few hours

Post Merge: February 02, 2011, 01:12:19 AM

if i missed anything just say

Modded Matt · « **Reply #16 on:** February 02, 2011, 05:27:07 AM »

this is almost perfect. all it needs now is the bdrop changed from white to black

whitetop · « **Reply #17 on:** February 02, 2011, 05:35:31 AM »

here you go black dropback

Modded Matt · « **Reply #18 on:** February 02, 2011, 05:48:43 AM »

that should work perfectly!!!

Modded Matt · « **Reply #19 on:** February 02, 2011, 08:58:08 AM »

here is the next image I am not 100% on how it should be modified yet....it is for our menu bars at the bottom of a post where it says " reply, notify, etc"

the main block you did above is complete thank you. when I get a sec I will take a screen shot of the new site to show your work.

whitetop · « **Reply #20 on:** February 02, 2011, 09:07:28 AM »

thx matt soon as you think of what you want just post it

Modded Matt · « **Reply #21 on:** February 02, 2011, 09:45:10 AM »

all the bars are menu buttons and need to be all rendered the same color as our buttons are now.
the back drop needs to be black #000 and the bottom half should be a light black

whitetop · « **Reply #22 on:** February 02, 2011, 10:14:57 AM »

hi ok got back black bottom light black just trying to get my head around the render thing lol sorry but dont understand? mite just be cos half asleep lol

Post Merge: February 02, 2011, 10:15:50 AM

what i got so far

Modded Matt · « **Reply #23 on:** February 02, 2011, 12:19:56 PM »

the four bars should all be the color of our post buttons. the buttons that say "reply" "notify me" etc they are kinda black with a shine at the top??

whitetop · « **Reply #24 on:** February 03, 2011, 12:37:40 AM »

if the bars to blocky sorry about that as i cannot fine a good smoother for it on paint shop

Modded Matt · « **Reply #25 on:** February 04, 2011, 07:57:35 AM »

can you make the grey line in this pic black? I thought the grey would be a nice contrast, but without changing the image calltags (all over the code) I cant get rid of it.

whitetop · « **Reply #26 on:** February 04, 2011, 08:00:10 AM »

here you go

Modded Matt · « **Reply #27 on:** February 04, 2011, 08:14:37 AM »

looks good

Famas · « **Reply #28 on:** February 04, 2011, 08:18:17 AM »

can you code matt as in html php etc

Modded Matt · « **Reply #29 on:** February 04, 2011, 09:45:47 AM »

I am using ccs and php for the new site

News:

Author Topic: i need some art help (Read 8076 times)