Author Topic: Experts Modders Need Help :)  (Read 3738 times)

Offline ethical ricado

  • I AM MY OWN NEMESIS
  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-1
  • Gender: Male
  • If it isn't borken, don't fix it.
Experts Modders Need Help :)
« on: March 01, 2011, 05:23:41 AM »
Hello All I am a begginer here...and i would love to learn many things from you because last night i checked all your post about modding and all...and i was like holy crap..is this possible..:D

so i just want few of you peoples to guide me in modding my ps3 controller as i am begginer and wat all things will required in this process


Thank you so much :)

NOTE:i have never modded anything before..:P


Helped you   ------->  + REP
Dont like me  ------->   - REP

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Experts Modders Need Help :)
« Reply #1 on: March 02, 2011, 09:05:10 AM »
soldering iron
flux
solder lol just kidding you should have the stuff already

depending on what you want to do add leds put rf in it spray your pad ect.
come to the rite place if you kiss admins as they promote you to admin.

Offline ethical ricado

  • I AM MY OWN NEMESIS
  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-1
  • Gender: Male
  • If it isn't borken, don't fix it.
Re: Experts Modders Need Help :)
« Reply #2 on: March 02, 2011, 10:54:43 AM »
Dude your helping me alot thanks..:D

can you tell me what are the basic tools required for mod...

i mean basic tools like soldner and all

can you give me a list so that i can buy all at once :)

thank you so much :)


Helped you   ------->  + REP
Dont like me  ------->   - REP

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Experts Modders Need Help :)
« Reply #3 on: March 02, 2011, 11:01:38 AM »
hey youll need solder skills id suggest learning on some old pcb or some bread board the copper stuff
flux isnt a must but helps alot
soldering iron if your doing rapid fire youll need
a pic programmer you can buy these or there are some on ebay etc the best for begginers to buy is a pic kit 2 well priced and great if your uk id suggest shopping around ebay is a good spot and farnell uk or you can make a diy programmer tutorial on here 
youll need wire id suggest kynar 30awg ebay 1 pound for 5 metres and finally tact switches dont be fooled with tact switched make sure to get some with a nice long tip on the button
youll need microchips witch are called "12f683" if you go direct to microchip.com you can get free samples and another thing you can have a really handy tool is a dremel multi tool (about 25pound) off ebay and dont forget some solder and a solder sucker

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Experts Modders Need Help :)
« Reply #4 on: March 02, 2011, 04:53:48 PM »
flux makes it easier to solder to stuff

in hardware stores you can get beginner setups in a box it will have what you need iron solder stand ect just no flux

do this testing on breadboards or pcb's

few beginner stuff from google

Code: [Select]
http://www.dummies.com/how-to/content/soldering-101.html
Code: [Select]
http://www.dummies.com/how-to/content/safe-soldering-checklist.html
Code: [Select]
https://www.acidmods.com/forum/index.php/topic,12310.0/nowap.html
Code: [Select]
http://www.youtube.com
come to the rite place if you kiss admins as they promote you to admin.

Offline ethical ricado

  • I AM MY OWN NEMESIS
  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-1
  • Gender: Male
  • If it isn't borken, don't fix it.
Re: Experts Modders Need Help :)
« Reply #5 on: March 04, 2011, 03:50:08 AM »
flux makes it easier to solder to stuff

in hardware stores you can get beginner setups in a box it will have what you need iron solder stand ect just no flux

do this testing on breadboards or pcb's

few beginner stuff from google

Code: [Select]
http://www.dummies.com/how-to/content/soldering-101.html
Code: [Select]
http://www.dummies.com/how-to/content/safe-soldering-checklist.html
Code: [Select]
https://www.acidmods.com/forum/index.php/topic,12310.0/nowap.html
Code: [Select]
http://www.youtube.com


Thanks guys you both helped me alot
i am practising this but i am still confused where to put the flux and how..:P

lol

thnkss guys 
:tup: :drunk:
« Last Edit: March 04, 2011, 03:56:07 AM by ethical ricado »


Helped you   ------->  + REP
Dont like me  ------->   - REP

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Experts Modders Need Help :)
« Reply #6 on: March 04, 2011, 07:42:28 AM »
that's why i put a youtube link there's lots of videos on beginner soldering its were i learned better soldering
come to the rite place if you kiss admins as they promote you to admin.

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: Experts Modders Need Help :)
« Reply #7 on: March 04, 2011, 08:32:40 AM »
I've never personally used flux for soldering but i have for welding and i believe you apply it to the areas you wish to solder before you begin soldering them

techninjadude

  • Guest
Re: Experts Modders Need Help :)
« Reply #8 on: March 04, 2011, 09:25:14 AM »
This is in the wrong Section?

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: Experts Modders Need Help :)
« Reply #9 on: March 04, 2011, 09:52:18 AM »
I use flux for soldering all the time. it helps to draw the solder onto what ever you are soldering. put the flux on the two points to be soldered together and then solder it together and it helps to draw the solder onto the joint instead of the iron.

for example if I'm soldering a wire onto a PCB trace, I scrape the solder mask (the green stuff covering up the trace) off of the trace, and strip the end of the wire, and then apply a small amount of flux to the cleaned trace and a little to the stripped end of the wire. put the wire to the trace, apply the iron to the joint and when it's heated up apply the solder (you'll know it's heated up cause the flux will melt, bubble and smoke just a little)... flux is especially handy when tinning wires or soldering multistrand wire as it will help pull the solder into the wire making a nice clean joint which the solder completely penetrates...

Most people don't consider flux to be a necessity (mostly because they use it without even really knowing they do. most people use a rosin core solder, the rosin core is rosin flux in the center of the solder), but personally I do, it makes nice clean strong joints.
« Last Edit: March 04, 2011, 10:00:17 AM by jrfhoutx »
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline ethical ricado

  • I AM MY OWN NEMESIS
  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-1
  • Gender: Male
  • If it isn't borken, don't fix it.
Re: Experts Modders Need Help :)
« Reply #10 on: March 06, 2011, 03:03:42 AM »
Thank You so so much guys
You all are helping me alot

now i know how to soldner and all but i am still confused about modding my ps3 controller's led...i mean they are so small so how can i remove them..?

Thanks
  :hifive: :#1:
« Last Edit: March 06, 2011, 03:04:22 AM by ethical ricado »


Helped you   ------->  + REP
Dont like me  ------->   - REP

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: Experts Modders Need Help :)
« Reply #11 on: March 06, 2011, 04:05:14 AM »
Heres a tut for the actual swap
https://www.acidmods.com/forum/index.php?topic=27144.0

This video is for the 360 but it shows the actual soldering in great detail
http://www.youtube.com/watch?v=BnAUToSHjAM


techninjadude

  • Guest
Re: Experts Modders Need Help :)
« Reply #12 on: March 06, 2011, 06:04:08 AM »
Thanks Hyper, for the vid.

Offline ethical ricado

  • I AM MY OWN NEMESIS
  • Chief squatting Hard
  • *
  • Posts: 18
  • Post quality +0/-1
  • Gender: Male
  • If it isn't borken, don't fix it.
Re: Experts Modders Need Help :)
« Reply #13 on: March 06, 2011, 10:54:43 PM »
@^^^ Yea Ryt...

Thank you so much hyper that video helped me alot :)

thank you so much
  :hifive: :victory:


Helped you   ------->  + REP
Dont like me  ------->   - REP

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal