Author Topic: some progress with jitter mod but still need some answers and help (Read 1222 times)

mhgg · « **on:** March 12, 2011, 07:36:29 PM »

Ok guys i just finished a pic programmer that i made the one i made was from gameron or someone like that and i now need to know how to use it do i just download a hex file and then load it up and it does it automatically or do i need to download some other software then download the hex file and upload it to that program or what and one thing i really need to know to make sure i built my programmer right is l< means ground right? if not i need to know asap

thanks for the help guys i really appreciate it

drummerdude · « **Reply #1 on:** March 12, 2011, 08:48:21 PM »

You need a software to load the hex codes and program the chip. You can use Winpic800 since its free. I use micropro cause it came with my programmer though. I think you can download winpic at www.winpic800.com

mhgg · « **Reply #2 on:** March 13, 2011, 08:24:30 AM »

thanks i will check that out hope it works for windows 7

News:

Author Topic: some progress with jitter mod but still need some answers and help (Read 1222 times)

mhgg

some progress with jitter mod but still need some answers and help

drummerdude

Re: some progress with jitter mod but still need some answers and help

mhgg

Re: some progress with jitter mod but still need some answers and help