Author Topic: Pinout PSP Go connector  (Read 5520 times)

Offline idog

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Pinout PSP Go connector
« on: March 28, 2011, 03:00:24 AM »
Hi guys,

First time registrator, long time lurker :)

I have a PSP Go here of which the pin connector is completely foobared (connector has been pushed in upside down and pushed and pushed). Nothing is intact inside this connector  :drunk:

Since I can't find a suitable replacement connector anywhere (if you have a shop in the benelux, please give me a shout), I was thinking of just solderiing a regular female usb connector to it for charging and data transfer purposes.

I have seen the other tread (dock mini usb adjustment) regarding some pinouts, but I cannot relate to it with regards on this internal pinout. If someone could be so kind as to mark which traces are the lines needed for my purpose (D-, D+, GND, 5V, anything else ? ) then I can have some use for this PSP Go again (not interested in video output).

Also, replacing the M2 connector with an MicroSD adapter ? Easy or not doable yet ?

Thanks in advance !


Dennis/idog

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Pinout PSP Go connector
« Reply #1 on: March 28, 2011, 04:41:56 AM »
the go has been virtually untouched. you wont find alot of info on it anywhere on the web. good luck.

Offline idog

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: Pinout PSP Go connector
« Reply #2 on: March 28, 2011, 05:32:50 AM »
Well. Made this mockup diagram with info from this forum and some other random finds. Gonna test it tonight.. should work :)

Offline idog

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: Pinout PSP Go connector
« Reply #3 on: March 29, 2011, 12:38:31 AM »
Well.. that didn't work. Turns out the PSPGo was already opened by the previous owner before (warranty sticker on battery was gone).

I removed the connector, cleaned everything and soldered wires to an usb connector. Closed it all up and used both the official PSP charger (had to grind a bit in the usb connector to fit it :)) and on a PC usb port. Not a single led lighted up and powering on did nothing.

I suspect one or more fuses to be blown. Any idea where to look ?


Offline nEoVaLoR

  • Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: Pinout PSP Go connector
« Reply #4 on: March 29, 2011, 12:56:34 AM »
So far we only know where the sound fuse is located, which wouldn't be part of your problem.... This is gonna be a tough thing to fix my friend.

Offline idog

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: Pinout PSP Go connector
« Reply #5 on: March 29, 2011, 01:09:02 AM »
Found this on a russian site. Gonna do some multimetering tonight :)

Offline mario_99

  • Who Farted ???
  • *
  • Posts: 216
  • Post quality +5/-3
  • Gender: Male
  • Acidmods User
Re: Pinout PSP Go connector
« Reply #6 on: March 29, 2011, 12:18:54 PM »
would that be the psp go back light fuse

Offline mario_99

  • Who Farted ???
  • *
  • Posts: 216
  • Post quality +5/-3
  • Gender: Male
  • Acidmods User
Re: Pinout PSP Go connector
« Reply #7 on: June 06, 2011, 10:46:40 AM »
any luck on what that fuse is

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal