Author Topic: my controller is getting a new look (Finished 4/25) (Read 5968 times)

Dcofer · « **on:** April 20, 2011, 04:37:38 PM »

OK so here is a list of the mods, two of them are from jr's tuts and the others are random ideas I had. I am doing this as I build so it probably wont be finished for a little bit based on the amount of free time I get.

Mods:
Tops rapid fire code

9mm - ABXY replacement
12g - D-pad cover replacement
7.62x54r - home button replacement

and finally triggers modified with 7.62x54r steel core bullets (no lead poisoning, thanks to being steel core instead of lead

)

So here is what I got done today, sorry if the pics are big:

motivational round, says Win (for winchester of course but still entertaining)

hopefully I will get more free time to get this done soon.

DuctTapedGoat · « **Reply #1 on:** April 20, 2011, 05:59:43 PM »

Very cool concept - looking forward to seeing the 9mm shells over the ABXY buttons and your shotgun Dpad.

Rodent · « **Reply #2 on:** April 20, 2011, 06:03:58 PM »

Looks good , i like the way it fits, Nice job

Dcofer · « **Reply #3 on:** April 21, 2011, 11:32:18 AM »

Thanks, yeah it took a lot of grinding of that home button to get it to fit but im happy with how this came out. I should be able to get some work on the 9mm and shotgun cartridges tomorrow afternoon when I get a hold of a dremel and an air brush (for the paint job).

Dcofer · « **Reply #4 on:** April 22, 2011, 10:32:15 PM »

Little update, I got a hold of a dremel so I was able to make some headway: (again thanks

for the tutorial and idea)

12 gauge d-pad:

case primed with clear plastic primer: (that little bit of blue is from the previous paint job that I couldn't get off, should be okay)

Should have it painted by tomorrow hopefully (at least base coat, might to airbrushing sunday) and will be working on the 9mm ABXY.

Started working on the rapid fire:

optocoupler wiring: (To make sure the RF chip turns off with the controller. Thanks RDC for the tutorial)

I hate hot glue but it makes it neater

4n25 optocoupler IC

Dcofer · « **Reply #5 on:** April 23, 2011, 02:06:47 PM »

Wired up most of the rapid fire early this morning before goin to sleep: (just need to finish painting the controller to install the tactilesand mount the chip)
chip is at the bottom of the picture, I decided to make it removable for future updates.

Painted the controller:
(this is the final color, going to accent with darker tan or brown on the bottom piece and bumpers, not enough surface area for good digital camo with out makign it look crowded)

Cut the 9mm ABXY:
(was much more difficult then

made it look haha but I think it turned out good)

Coming together fairly quickly so hopefully it will be done by tomorrow (not going to clear coat until tomorrow, going to give the paint time to fully dry)

On a side note now I know who everyone is talking to ir about whe n Isee domo smackin the smiley face haha.

drummerdude · « **Reply #6 on:** April 23, 2011, 02:40:57 PM »

It looks great! just wondering what rapidfire u installed into it?

Dcofer · « **Reply #7 on:** April 23, 2011, 02:48:39 PM »

Thanks, yeah it may not look like it from the pics but its been fairly tough process, its fun haha. I am actually installing Tops rapid fire V2 Rev 7, i chose it for now because it is good proven code however I did make the chip removable so I have the option to test other codes also as long as they use the same pin outs as tops.

Dcofer · « **Reply #8 on:** April 23, 2011, 07:14:47 PM »

Here is the mock up of the painted controller shell. The edge pieces look orange but they are more of a light brown leather color, I think it came out good though.

Dcofer · « **Reply #9 on:** April 25, 2011, 11:29:18 AM »

Whew, finally finished my controller. Had some frustrating moments and noticed there are some tiny out of the way spots that didnt get painted fully but not significant for me to redo it. All in all I am very happy.

Again the mods are:

Tops rapid fire code

Paint - tan/light brown

9mm - ABXY replacement
12g - D-pad cover replacement
7.62x54r - home button replacement

~~and finally triggers modified with 7.62x54r steel core bullets (no lead poisoning, thanks to being steel core instead of lead)~~
^ just couldnt get it designed right, might try it later

all pics and vid are off my phone so sorry for quality

Short vid of rapid fire mode one working in CoD:BO

Sammy · « **Reply #10 on:** April 25, 2011, 11:36:34 AM »

Wow this thing is awesome!!

Dcofer · « **Reply #11 on:** April 25, 2011, 11:57:36 AM »

Thank you thank you glad you like it, it feels good to get my first real mode done and working haha

FOOKz™ · « **Reply #12 on:** April 25, 2011, 07:58:24 PM »

finished product looks great man.

how does the paint feel?

crazy-modder · « **Reply #13 on:** April 25, 2011, 08:02:02 PM »

For that being your first mod, i give it an A+++! looks very good bro.

toadzilla · « **Reply #14 on:** April 25, 2011, 08:25:28 PM »

hey u know it looks awesome did u know theres a certain bullet that fits on the analogs i just started seeing them on ebay

Dcofer · « **Reply #15 on:** April 26, 2011, 02:02:13 PM »

Thank you thank you

Quote from: FOOKz™ on April 25, 2011, 07:58:24 PM

finished product looks great man.

how does the paint feel?

It feels just like the original plastic, though I am letting it sit for about a week before I really start using it to make sure the clear coat is completely dry.

Quote from: crazy-modder on April 25, 2011, 08:02:02 PM

For that being your first mod, i give it an A+++! looks very good bro.

Hopefully this is just the beginning of my modding endeavors [evil laugh]

Quote from: toadzilla on April 25, 2011, 08:25:28 PM

hey u know it looks awesome did u know theres a certain bullet that fits on the analogs i just started seeing them on ebay

interesting interesting, I am intrigued I will need to look at that

jrfhoutx · « **Reply #16 on:** April 26, 2011, 03:39:11 PM »

Looks really nice, man. I like the guide button, there are quite a few shells that will work with that method...

Quote from: toadzilla on April 25, 2011, 08:25:28 PM

hey u know it looks awesome did u know theres a certain bullet that fits on the analogs i just started seeing them on ebay

It's just people putting 12Ga shells on the analogs...

Quote from: Dcofer on April 23, 2011, 02:06:47 PM

Cut the 9mm ABXY:
(was much more difficult then made it look haha but I think it turned out good)

See, I'm glad someone else has said it's not the easiest thing... they look really good though, you did a good job with them

when I was selling them everyone said I was charging too much because the mod was easy... sure it was, which is why I see so many people making their own 9mm ABXY buttons... [/sarcasm]

Dcofer · « **Reply #17 on:** April 26, 2011, 04:05:38 PM »

Yeah you should be able to fit any casing pretty much up to that one in there ( I had to shave the guide button walls pretty thin)

I thought about using 12ga on the sticks but I didnt like how it was gonna go together.

I think anyone who says cutting those shells is easy then they obviously haven tried, I admit it did look easy but an hour and many metal shaving in my eyes says otherwise haha maybe if you had a really steady hand and a good way to mark off the cuts. Its just a really tedious process.

But it means a lot that you like it since I got all the insperation from your tutorials haha

jrfhoutx · « **Reply #18 on:** April 26, 2011, 05:30:06 PM »

the problem with that casing is that the rim is wider than the base and the base isn't as wide as the actual guide button, so when you make a direct replacement like the 9mm ABXY buttons it doesn't fit properly and is really loose in the guide button ring. there are a few casings that will work as direct replacement similar to the 9mm, but they can be expensive to buy empties and at least one of them is a fairly rare wildcat cartridge... unless you're a military sniper...

and yeah I do have a process to make things a little easier/faster that I didn't share in the tutorial, but nothing crazy, just standard masking and marking methods...

Dcofer · « **Reply #19 on:** April 26, 2011, 05:44:29 PM »

True, my roommate happens to have a mosin nagant so we have plenty of empty 7.62x54r casings. All of the rounds in my controller were fire by me or a friend so I didnt buy any just for this, i kinda like that sentimental factor haha.

my abxy buttons were prolly done as a complicated and dangerously as they could have been with the tools I had haha but it can be done just with a little more work.

Crumbz · « **Reply #20 on:** April 26, 2011, 11:34:46 PM »

Quote from: Dcofer on April 25, 2011, 11:29:18 AM

Whew, finally finished my controller. Had some frustrating moments and noticed there are some tiny out of the way spots that didnt get painted fully but not significant for me to redo it. All in all I am very happy.

Again the mods are:

Tops rapid fire code

Paint - tan/light brown

9mm - ABXY replacement
12g - D-pad cover replacement
7.62x54r - home button replacement

~~and finally triggers modified with 7.62x54r steel core bullets (no lead poisoning, thanks to being steel core instead of lead)~~
^ just couldnt get it designed right, might try it later

all pics and vid are off my phone so sorry for quality

Short vid of rapid fire mode one working in CoD:BO

i love that book on the side there and awsome looking mod! great work!

Dcofer · « **Reply #21 on:** April 27, 2011, 10:12:05 PM »

haha thanks, yeah that is def a good series

News:

Author Topic: my controller is getting a new look (Finished 4/25) (Read 5968 times)