Author Topic: ps3 RF through R1 button?  (Read 1682 times)

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
ps3 RF through R1 button?
« on: May 12, 2011, 11:17:44 PM »
are there any RF codes for the ps3 that uses the R1 button instead of the button you install
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: ps3 RF through R1 button?
« Reply #1 on: May 12, 2011, 11:28:05 PM »
just check in the opensource section. this is what you need:

https://www.acidmods.com/forum/index.php/topic,37745.0.html

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
Re: ps3 RF through R1 button?
« Reply #2 on: May 13, 2011, 08:41:23 PM »
i tried it followed all the steps and rechecked and reprogrammed and it doesnt work i have a v2 controller i hook up all the wires and everything seems ok but no buttons work until i remove the tp8 wire then it goes back to normal wth am i doing wrong
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: ps3 RF through R1 button?
« Reply #3 on: May 14, 2011, 06:57:52 AM »
u should not be connected to tp8, the only controller this had issues with was the V4 controller.

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
Re: ps3 RF through R1 button?
« Reply #4 on: May 14, 2011, 07:07:17 AM »
sorry i meant tp18 and i got v3 cant make it work for the life of me
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal