Author Topic: my first time using a dremel xD (Read 17404 times)

JC531 · « **on:** June 02, 2011, 05:08:52 PM »

hey guys well i just got a dremel today and decided to test it. i tryed cutting it like i saw loboplayero do it except more safer? lol idk but yea. i didnt know where else to post so i came here. in the picture you can see i cut out the middle circle. the only part i sanded was the door not the circle.(thats y it looks

up. the reason for the messups was cuz my mom kept bugging me. anyways lesson learned lock the door and put some earbuds on. anyways again this was my first time dremeling. the umd door was a spare part i had laying around. other than that im happy how well the dremel sanded and cut out the pieces. and other than the

up parts everything came out well

so yea any tips ON dremeling these things will be appreciated. and yea i kno it came out

up xD. l8r guys

nEoVaLoR · « **Reply #1 on:** June 02, 2011, 05:50:05 PM »

WHAT happened !?!?!?!?! D: D: D: D: D:

r.i.p. umd door.....

seriously how did you manage to do that? I'm guessing you went out a little too far and then tried to even it out or something.. What head did you use??

crazy-modder · « **Reply #2 on:** June 02, 2011, 06:32:28 PM »

o wow, i feel sry for that psp lol....were you

JC531 · « **Reply #3 on:** June 02, 2011, 07:34:06 PM »

Omg *facepalm* did u guys READ this was a broken umd door I had. So I tryed pratice dremeling on it xD

nEoVaLoR · « **Reply #4 on:** June 02, 2011, 07:50:18 PM »

Quote from: JC531 on June 02, 2011, 07:34:06 PM

Omg (facealm) did u guys READ this was a broken umd door I had. So I tryed pratice dremeling on it xD

I read perfectly well.

And it's facepalm, not facealm *facepalm*

There is no way that door was "broken" like that. You totally effed it up.

like crazy said you must have been drinking, or smoking some strong dope

FOOKz™ · « **Reply #5 on:** June 02, 2011, 08:36:48 PM »

You have to hold the dremel firm and make small cuts into the plastic at a time.

This works:
1. find the area to cut
2. roughly and slowly cut with a dremel
3. knock the large piece of plastic out
4. start sanding with large grit paper
5. piece should start looking good after a few hours of sanding move to small grit paper.

after that you should be ok.

Sammy · « **Reply #6 on:** June 02, 2011, 08:44:48 PM »

it looks like you tryed to cut it out with a spoon

arjohn · « **Reply #7 on:** June 02, 2011, 09:25:59 PM »

just take it easy when using dremel.. just 1 wrong move you will ruin everything...

crazy-modder · « **Reply #8 on:** June 02, 2011, 10:26:43 PM »

LMAO sammy..... im just picturing him digging at it with a spoon haha thats hilarious. I bet famas cuts stuff with a spoon.

nEoVaLoR · « **Reply #9 on:** June 03, 2011, 12:48:42 AM »

Quote from: crazy-modder on June 02, 2011, 10:26:43 PM

LMAO sammy..... im just picturing him digging at it with a spoon haha thats hilarious. I bet famas cuts stuff with a spoon.

i bet techninja cuts stuff with the wrong end of the spoon.

hyper999 · « **Reply #10 on:** June 03, 2011, 02:45:08 AM »

Quote from: nEoVaLoR on June 03, 2011, 12:48:42 AM

i bet techninja cuts stuff with the wrong end of the spoon.

is there a wrong end of a spoon for cutting umd doors? lol

JC531 · « **Reply #11 on:** June 03, 2011, 03:41:17 AM »

Lol hahahahaha u guys r funny xD. Yea I mispelled facepalm. And thanx for the t
how to fooks. Lol and I'm serius this door was

up. Even before I dremeled it.

Blazinkaos · « **Reply #12 on:** June 03, 2011, 01:48:50 PM »

Well I guess not everyone is good the first time you try. Practice counts man just keep trying.

JC531 · « **Reply #13 on:** June 03, 2011, 09:11:35 PM »

@Blazinkaos yea. and i did it again on other broken umd door i had and it came out perfect!

a lil studying, some tips from fellow modders and family members who some are carpenters n stuff and i did great! here check it out. out and the door's paint looks like crap cuz its from an old attempted paint job xD. and the paint was sanded long ago.

the silver door and circle is from yesterday and the black door and circle is from today.

silver=yesterday
black=today

edit
_________________

btw= i know how to paint now so dont go there lol.

hyper999 · « **Reply #14 on:** June 04, 2011, 03:37:22 AM »

much better

Blazinkaos · « **Reply #15 on:** June 04, 2011, 05:59:47 AM »

There you go thats much better. Yea dremeling is like what a carpenter does my uncle has his own business of that just have to be creative steady hand. There tons of bits out there for those dremels I got a 20 set diamond bits. They use those to cut down on concrete and they cut perfect on plastic. Something to look for.

JC531 · « **Reply #16 on:** June 04, 2011, 08:51:21 AM »

cool! hey for the diamond bits do you know if they have any for a chicago electric rotary tool? (i have one i just say dremel cuz its faster to say) btw the ce tool works pretty cool i forgot which dremel i compared it to tho. if there are any do you know where? i got my ce rotary tool (or dremel) at harbor freight. you think they might have some diamond bits there?

heres the link:

http://www.harborfreight.com/power-tools/rotary-tools/professional-4-speed-rotary-tool-kit-40457.html

thanx!

hyper999 · « **Reply #17 on:** June 04, 2011, 09:56:12 AM »

any dremel bits will fit that tool as it has the same size collet as a dremel

crazy-modder · « **Reply #18 on:** June 04, 2011, 09:57:19 AM »

Dude do not get that harbor freight crap....i bought one of those awhile back and it was super weak. As soon as i would touch the cutting wheel to what i was cutting it would freakin die cause it had no nuts. Spend your money right the first time and just get a DREMEL brand tool.

JC531 · « **Reply #19 on:** June 04, 2011, 10:14:08 AM »

@crazy-modder well you probably got the $10 dollar one but i tried the cutting wheel and it worked great! you probably got a faulty one or something. and with a warranty if it breaks or something i get a new one free. but ok. i also got dis one cuz im trying to save some money for other parts. but right now its working pretty good! i might actually save some money on the side for a real dremel but that wont be any time soon.

loboplayero · « **Reply #20 on:** June 04, 2011, 11:03:01 AM »

Quote from: JC531 on June 02, 2011, 05:08:52 PM

hey guys well i just got a dremel today and decided to test it. i tryed cutting it like i saw loboplayero do it except more safer? lol idk but yea. i didnt know where else to post so i came here. in the picture you can see i cut out the middle circle. the only part i sanded was the door not the circle.(thats y it looks up. the reason for the messups was cuz my mom kept bugging me. anyways lesson learned lock the door and put some earbuds on. anyways again this was my first time dremeling. the umd door was a spare part i had laying around. other than that im happy how well the dremel sanded and cut out the pieces. and other than the up parts everything came out well so yea any tips ON dremeling these things will be appreciated. and yea i kno it came out up xD. l8r guys

dude the first thing i said was DONT TRY THIS AT HOME

ive been cutting doors for a while man its takes practice u need to follow the steps provided by fookz on this post they will help u much bettter by the way the second door came out great!! just practice!

druid · « **Reply #21 on:** June 04, 2011, 01:03:13 PM »

I would spend the 37 dollars to buy this or at least build a homemade one with wood and a plastic cutting board for table top.

Sammy · « **Reply #22 on:** June 04, 2011, 01:10:59 PM »

wow i just use a razor knife to cut mine out, it takes a while but it comes out nice.

jacobia jacob · « **Reply #23 on:** June 04, 2011, 02:01:07 PM »

lol.

at least he's practicing, keep at it but maybe just buy a sheet of plastic and practice cutting holes in it.

crazy-modder · « **Reply #24 on:** June 04, 2011, 02:19:15 PM »

Pffff i remember my first beer......

Blazinkaos · « **Reply #25 on:** June 04, 2011, 03:02:37 PM »

Quote from: JC531 on June 04, 2011, 08:51:21 AM

cool! hey for the diamond bits do you know if they have any for a chicago electric rotary tool? (i have one i just say dremel cuz its faster to say) btw the ce tool works pretty cool i forgot which dremel i compared it to tho. if there are any do you know where? i got my ce rotary tool (or dremel) at harbor freight. you think they might have some diamond bits there?

heres the link:

http://www.harborfreight.com/power-tools/rotary-tools/professional-4-speed-rotary-tool-kit-40457.html

thanx!

Im not sure where youll find the diamond bits i was lucky enough to find them at a hardware store that i had to travel 50 miles to get to. So I suggest just look up electronic places or hardware places and ask see if they carry any.

Oh wait i searched the internet here are the ones I have.
http://www.amazon.com/Pro-Quality-20-Piece-Diamond-Point-Rotary-Tool/dp/B000MOI9G6/ref=sr_1_1?s=hi&ie=UTF8&qid=1307225078&sr=1-1

JC531 · « **Reply #26 on:** June 04, 2011, 03:32:25 PM »

cool guys thanx. thanx for the support too! lol and @crazy-modder im 14 dude i dont do that stuff. also @druid that would actually be pretty cool how much does it cost?

Blazinkaos · « **Reply #27 on:** June 04, 2011, 03:42:11 PM »

JC531 did that link work for you.

Sammy · « **Reply #28 on:** June 04, 2011, 05:26:12 PM »

Quote from: JC531 on June 04, 2011, 03:32:25 PM

@druid that would actually be pretty cool how much does it cost?

$37

nEoVaLoR · « **Reply #29 on:** June 04, 2011, 05:32:35 PM »

Quote from: sammy on June 04, 2011, 01:10:59 PM

wow i just use a razor knife to cut mine out, it takes a while but it comes out nice.

That is retarded, you're asking for injury.

If you have a soldering iron, stick a flathead screwdriver into it. Bam, high precision melting thingy.

News:

Author Topic: my first time using a dremel xD (Read 17404 times)