Can Someone Make This Code

[Naython]

I've been searching everywhere for a hex or asm for 12f683 pic with just a on off effect for led's in my controller
i have been using the ABXY Flasher but all i need is press the tactile all the leds are on press it again all the leds are off if anyone can do this it will be much appreciated

[Modded Matt]

U don't need a code. Wire them direct and use a latching push button to turn them on and off

[Naython]

since i've managed to get a small 7mm tactile switch oppersite the sync button a latching switch wont fit thats why i've been thinking about using a 12f683 to get the job done

[Modded Matt]

here is a circut that will work, very cheap.


if you want to do it with programming, the code you need is all over the net but not for the 12f683, which is WAY overkill for this action.

[Naython]

i've searched for the code but cant find it anywhere can you point me in the right direction
once done i plan on doing a tut on how to add an extra button oppersite the sync button

[hyper999]

ok ok ok I'll write the code!

so when you press the button it will toggle the state of four pins, correct?

[Naython]

that could be great if you can

[kronosslayer]

Hello Naython!

Wire your tactile button to Pin 2 with a 10k pull down resistor to ground.

Pins 3,5,6,7 will be your output for your LED's

If you need any other help feel free to contact me

Here's the schematic

Good Luck!

[hyper999]

ah I forgot about this, sorry man looks like its sorted now anyway...

[Naython]

Hi there
thank you for that sorry i haven't replied before just moved home and didn't have the internet
i'll be testing this code out as soon as i've sorted out my work room

[kronosslayer]

Good Luck!! Let me know how the code works for ya 

[xSLICKVICx]

I Programmed this code to my IC and it didn't work for me. It either doesn't work or I have read the schematic wrong. Can someone verify the works?