drop shot mod, i need help

[manwinder]

i was making a dropshot mod, i already now that i can solder 2 wires to b, and add a button, but i wanted to make it so that it press b, every time i press rt(or lt), i have tried connecting the b wires  together and connecting them to a on/off switch(not a light swtch),  and having the other wire connected to the middle point on the right side(the point in the middle of the 3 points on the right side of the controller

[Nevbox]

You have a common problem when doing stuff like this, you could either use a double pole switch or you could maybe program a pic to do it for you

B button-switch - resistor - power 
RT middle pin- switch - resistor -power

I use 330 ohm resistors for middle pin

Also I don't think you can use a single pole switch because then B and middle pin would be connect al the time meaning every time u press B it should probably fire.

If you get anywhere tell me

Thanks

[manwinder]

thanks for the help, i am probably going to learn how to program and code a pic and then do it that way

[Nevbox]

Some people talked about using a 555 timer

[manwinder]

so what does a 555 timer do

[Nevbox]

I don't now much on the subject but, its a type of PIC and it's generally used for flashing leds etc...

[hyper999]

I don't now much on the subject but, its a type of PIC and it's generally used for flashing leds etc...

its not a type of PIC, its a type of IC. Here's some info

http://www.kpsec.freeuk.com/555timer.htm

[Nevbox]

PIC - Programmable Integrated Circuit
IC - Integrated Circuit

Can you not program 555 timers?

[hyper999]

No, 555 timers are not programmed, you control their operation by the use of external components.

[Nevbox]

As I said I don't know much about them