Author Topic: HELP ON ROBBOS JITTER MOD  (Read 11585 times)

Offline tempermodz

  • Motor Mouth
  • *
  • Posts: 81
  • Post quality +0/-2
  • Gender: Male
  • Acidmods User
HELP ON ROBBOS JITTER MOD
« on: July 03, 2011, 02:32:01 PM »
on the diagram do u need the brown line on the 5th pin ? also is there a diagram for cg2 and matrix if that is necessary

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: HELP ON ROBBOS JITTER MOD
« Reply #1 on: July 03, 2011, 02:55:28 PM »
no the brown line does nothing it was just put there to trick people, YES OF COURSE YOU NEED THE BROWN LINE THAT IS THE Y BUTTON CONNECTION.

And dude seriously read the thread Reply #22 has everything you want.

Offline sQs

  • ½ Pint
  • *
  • Posts: 33
  • Post quality +6/-5
  • Gender: Male
  • Acidmods User
Re: HELP ON ROBBOS JITTER MOD
« Reply #2 on: July 04, 2011, 10:06:41 PM »
man, that does not work in Matrix 1 or 2, only in CG/CG2

Offline tempermodz

  • Motor Mouth
  • *
  • Posts: 81
  • Post quality +0/-2
  • Gender: Male
  • Acidmods User
Re: HELP ON ROBBOS JITTER MOD
« Reply #3 on: July 11, 2011, 12:46:57 AM »
Yeah.. What type of optocoupler does the cg2 needs?
Thanks

Offline FOOKz™

  • Hardware Modder
  • Research & Development
  • E = MC² Mad Scientist
  • *
  • Posts: 2070
  • Post quality +37/-2
  • Electronics Expert Electrical Engineer
Re: HELP ON ROBBOS JITTER MOD
« Reply #4 on: July 11, 2011, 01:03:09 AM »
Yeah.. What type of optocoupler does the cg2 needs?
Thanks
You need a OPIA4010 or anything similar.

Datasheet: http://www.optekinc.com/datasheets/OPIA4010D.pdf

(Thanks Hyper)




Wiring the optocoupler up: https://www.acidmods.com/forum/index.php/topic,34805.0.html

(Thanks RDC)

Follow my Instagram and subscribe to my YouTube

Offline tempermodz

  • Motor Mouth
  • *
  • Posts: 81
  • Post quality +0/-2
  • Gender: Male
  • Acidmods User
Re: HELP ON ROBBOS JITTER MOD
« Reply #5 on: July 23, 2011, 01:30:57 PM »
I got some couples, they look exactly like a pic but with 4 pins. How do I tell wich is wich, like the pins
There's a lil notch as well . But smaller then the pic.

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: HELP ON ROBBOS JITTER MOD
« Reply #6 on: July 23, 2011, 04:06:47 PM »
I got some couples, they look exactly like a pic but with 4 pins. How do I tell wich is wich, like the pins
There's a lil notch as well . But smaller then the pic.

Google "(insert part number here [its probably written on the top]) datasheet" then find a pdf, open it and it will have a diagram showing you which is which.

Offline jonnyhacks

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HELP ON ROBBOS JITTER MOD
« Reply #7 on: November 06, 2013, 11:01:39 AM »
 :fear: umm hey guys i know im out of topic but in robbos jitter it the 12f683 in a dead bug possition or how? i cant seem to figure it out

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: HELP ON ROBBOS JITTER MOD
« Reply #8 on: November 06, 2013, 11:11:04 AM »
:fear: umm hey guys i know im out of topic but in robbos jitter it the 12f683 in a dead bug possition or how? i cant seem to figure it out
if you look on the chip there is a dot above one of the prongs and a notch at one end of the chip the dot and the notch should be on the same end
the dot is where the red is shown in the pic for power this should also be the #1 post on the chip
« Last Edit: November 06, 2013, 11:11:40 AM by Rodent »

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline ViSioNXx

  • Global Moderator
  • Granny Spanker
  • *
  • Posts: 381
  • Post quality +6/-0
  • Gender: Male
  • PC Guru
Re: HELP ON ROBBOS JITTER MOD
« Reply #9 on: November 06, 2013, 11:33:10 AM »
if you look on the chip there is a dot above one of the prongs and a notch at one end of the chip the dot and the notch should be on the same end
the dot is where the red is shown in the pic for power this should also be the #1 post on the chip


To install it is best to flip it over dead bug. Just mark pin 1 as rodent said and work from their.

Offline jonnyhacks

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HELP ON ROBBOS JITTER MOD
« Reply #10 on: November 06, 2013, 02:21:16 PM »
so lets say i put the chip on dead bug position with the notch on top ...witch means the pin in the right top corner will be #1 right

and thanks for the quick responses
« Last Edit: November 06, 2013, 02:23:20 PM by Rodent »

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: HELP ON ROBBOS JITTER MOD
« Reply #11 on: November 06, 2013, 02:24:22 PM »
so lets say i put the chip on dead bug position with the notch on top ...witch means the pin in the right top corner will be #1 right

and thanks for the quick responses
there is a dot that would be where the #1 pin or in this pic would be the red wire to positive.  so if you flipped it upside down then it would be on the right unless you flipped it the wrong way.
« Last Edit: November 06, 2013, 02:25:22 PM by Rodent »

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline jonnyhacks

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HELP ON ROBBOS JITTER MOD
« Reply #12 on: November 06, 2013, 04:43:58 PM »
um ok i have a diferent type of question so i made my own jitter mod right and i had to connect the wire that normally goes to the left trigger and connect it to the x button and added a momentery push button. and the right triger towards y but it also does rappid fire ..than i aded an on off switch for the conection towards y ..so when ever i use my jitter i need to hold the momentary button and the right trigger at the same time ..it works good but when ever i dont press it at the right time it messes up a little is there any way i could add something to make both things work with out the momentary button and just use the right trigger ..ive been trying to figure that out help.....? :beg:

Offline ViSioNXx

  • Global Moderator
  • Granny Spanker
  • *
  • Posts: 381
  • Post quality +6/-0
  • Gender: Male
  • PC Guru
Re: HELP ON ROBBOS JITTER MOD
« Reply #13 on: November 06, 2013, 05:46:11 PM »
I dont think jitter should take up an extra button.....

Why not google sethmods and use his hex creator. That way you could have jitter and rapidfire.... Or just use the second output pin for x...

Hard to answer not knowing the way that hex isa set up to run just guessing.

WHITE 4ND N3RDY

  • Guest
Re: HELP ON ROBBOS JITTER MOD
« Reply #14 on: November 06, 2013, 06:56:24 PM »
If u go with Seth mods I'll pm u all the jitters u need and walk u through how to wire the chip up. Or I can send u a hex file to upload into your pic programmer and and just tell u how to wire everything up. Get back to me if your interested. I got all the latest jitters for all cod titles even MW3.

Offline jonnyhacks

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HELP ON ROBBOS JITTER MOD
« Reply #15 on: November 07, 2013, 12:17:26 PM »
well my fps for the trigger and x are both 30 fps ...but when i use it for the striker i need the momentery button to jitter so i have to press both the trigger and the extra button

Offline ViSioNXx

  • Global Moderator
  • Granny Spanker
  • *
  • Posts: 381
  • Post quality +6/-0
  • Gender: Male
  • PC Guru
Re: HELP ON ROBBOS JITTER MOD
« Reply #16 on: November 07, 2013, 12:40:48 PM »
well my fps for the trigger and x are both 30 fps ...but when i use it for the striker i need the momentery button to jitter so i have to press both the trigger and the extra button

If you have a programmer then just use sethmods.com to create a new hex and use that install guide. Not sure how he works his but I am fairly sure you wont have to tie up an extra button/output pin for it.

If not then if you are in the USA just hit me up or a few others on here and we can send you a chip pre programmed with a better hex.

 at this point a better hex would be easier then trying to figure out an answer for your current hex.

WHITE 4ND N3RDY

  • Guest
Re: HELP ON ROBBOS JITTER MOD
« Reply #17 on: November 07, 2013, 01:07:37 PM »
I've already done all the dirt work for you get ahold of me if you use sethmods I can hook you up with all the jitters that you want

Offline ViSioNXx

  • Global Moderator
  • Granny Spanker
  • *
  • Posts: 381
  • Post quality +6/-0
  • Gender: Male
  • PC Guru
Re: HELP ON ROBBOS JITTER MOD
« Reply #18 on: November 07, 2013, 05:09:51 PM »
I've already done all the dirt work for you get ahold of me if you use sethmods I can hook you up with all the jitters that you want

Thats fine. I was offering to send him pre programmed chip. No dirt required....

WHITE 4ND N3RDY

  • Guest
Re: HELP ON ROBBOS JITTER MOD
« Reply #19 on: November 07, 2013, 05:47:27 PM »
That's cool I'm just letting him know I've done all my own create a hex with Seth mods and I got some real good stuff. That's what I mean by dirt work doing all the testing and re flashing to make top notch mods.
« Last Edit: November 12, 2013, 07:10:25 AM by Rodent »

Offline jonnyhacks

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HELP ON ROBBOS JITTER MOD
« Reply #20 on: November 11, 2013, 09:18:20 PM »
thanks it would be great if you could give me a all programmable hex jitter, rappid fire, and akimbo and any others you can do ..if your able to it would be amazing ..im also willing to pay for the hex

by the way how do I get to sethmods ???
[admin]please do not double post click modify to edit[/admin]
« Last Edit: November 12, 2013, 07:09:36 AM by Rodent »

Offline SethMods

  • Registered BST
  • King of the Wii-tards
  • *
  • Posts: 189
  • Post quality +17/-1
  • Gender: Male
  • Acidmods User
Re: HELP ON ROBBOS JITTER MOD
« Reply #21 on: November 12, 2013, 07:09:16 AM »
sethmods.com

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: HELP ON ROBBOS JITTER MOD
« Reply #22 on: November 12, 2013, 07:12:31 AM »
Try this sethmods added this for acidmod members
https://www.acidmods.com/forum/index.php/topic,43002.0.html

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline jonnyhacks

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: HELP ON ROBBOS JITTER MOD
« Reply #23 on: November 12, 2013, 01:56:31 PM »
thanks umm by the way it dosent say how to wire it up to x and y do you have any pictures how

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: HELP ON ROBBOS JITTER MOD
« Reply #24 on: November 12, 2013, 02:13:13 PM »
thanks umm by the way it dosent say how to wire it up to x and y do you have any pictures how
Send Sethmods a PM he will help  you in anyway  needed he really good guy helps out alot of people


 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal