Author Topic: New Matrix PCB  (Read 2485 times)

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
New Matrix PCB
« on: July 16, 2011, 09:38:54 AM »
Does anyone know how common these are now-a-days?

Or should I say, if I wanted to get one is there any color/style that are all the new Matrix 2? I want to get one to test with since the A nd B buttons are different than before. But I am also curious about the frequency of them too.
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: New Matrix PCB
« Reply #1 on: July 16, 2011, 10:38:12 AM »
how do you identify a matrix 2 board?
« Last Edit: July 16, 2011, 10:42:57 AM by Anonamous »

Offline toadzilla

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 997
  • Post quality +132/-0
  • Gender: Male
  • something something Tech support
Re: New Matrix PCB
« Reply #2 on: July 16, 2011, 01:40:42 PM »
Does anyone know how common these are now-a-days?

Or should I say, if I wanted to get one is there any color/style that are all the new Matrix 2? I want to get one to test with since the A nd B buttons are different than before. But I am also curious about the frequency of them too.
if im not mastaken the new dpad switchable one and the new black one is lemme quickly check whats the indercator that its mcb matrix 2?

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: New Matrix PCB
« Reply #3 on: July 16, 2011, 02:10:56 PM »
if im not mastaken the new dpad switchable one and the new black one is lemme quickly check whats the indercator that its mcb matrix 2?

i am yet to see an mx 2 in the uk (i want to play with one aswell) and all the silver ones with the new dpad have had cg2 boards for me.

Offline toadzilla

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 997
  • Post quality +132/-0
  • Gender: Male
  • something something Tech support
Re: New Matrix PCB
« Reply #4 on: July 16, 2011, 02:15:56 PM »
what does matrix 2 look like do we know?

Offline toadzilla

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 997
  • Post quality +132/-0
  • Gender: Male
  • something something Tech support
Re: New Matrix PCB
« Reply #5 on: July 16, 2011, 02:18:48 PM »
probaly will be in the new gow 3 controllers

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: New Matrix PCB
« Reply #6 on: July 16, 2011, 03:13:40 PM »
i am yet to see an mx 2 in the uk (i want to play with one aswell) and all the silver ones with the new dpad have had cg2 boards for me.

same here. when I saw the thread it was the first controller I checked because its the newest one I have and its cg2

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: New Matrix PCB
« Reply #7 on: July 16, 2011, 03:17:46 PM »
Here is a pic of the board and a little information on how to find one

https://www.acidmods.com/forum/index.php/topic,39073

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: New Matrix PCB
« Reply #8 on: July 16, 2011, 06:52:09 PM »
Thanks Hyper,

Thats the board I meant. This PCB has been around for 4 months now. WHile alot of people have dismissed it as just the return of the original Matrix, I have 2 major concerns why it is different:

The 2V switched source is gone. While everyone just wires it up so it wont turn off, or say you can just use an opto to turn it off, my concern is that the opensource design counted on the fact that the chip was powered by 2V. This new one only has a 3V source. This is why people have mixed results when using the old codes (and have RF shooting all the time).

The second concern is that the A and B buttons are not matrixed like the old controller. I really want to see how this works.

I dont have time to play console games, not do I market this stuff either. I have 2 old matrix and 2 version 1 CG controllers that have opensource mods in them. I dont really want to waste alot of money by chancing on a purchase, so I was wonering if anyone knew for certain about this PCB always being in like the silver controller, etc. From the sounds of all of the mods shops, they make it sound like this PCB is everywhere (because apparently they dont want it).

Its not a big deal, I am just looking for more information. I can always post a WTB in a few forums to get a M2 anyway.
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal