Author Topic: XBOX 360 Blue & White, Modders Beware! (FINISHED) (Read 23759 times)

Rodent · « **on:** July 31, 2011, 07:47:34 PM »

Rapid fire maybe some paint, maybe some led mods pretty simple stuff nothing spectacular in my eyes but all in it to be the best

Colors painted, Blue and white
Leds not sure yet
If I use xbox 360 Rapid fire will be Hazers Flex RF or Crazy-Modders 6 mode RF

Pic of controller with logo

"MY Final decision will be before August 6th 2011 "
AS of Now This thread is under construction

I am deep in thought look below

EDIT:"Started August 18, 2011, 11 days after the competition started"

see plan and simple so far blue and white ROL.

UPdate: August 29,2011

Sample video August 30,2011

This is BADASS

http://www.youtube.com/watch?v=YqcTuUO-ljU&feature=channel_video_title

Look no Hands and it turns on.. Bam B

http://www.youtube.com/watch?v=qlGLF0qcSH0

UPDATE EDIT: ok well I got alot accomplished today, little bit more soldering, some moddifcations to the case and then prep for some paint i think is whats next on the agenda, coming along pretty smoothly so far, had some problems with testing due to I am not that good with electronics, custom ideas and repairs and making things look BADASS is my speciality.

Special thanks to crazy-modder for the blues leds man there bright gotta where my sunglasses around them

Speical thanks to Hazer for his awsome FLEX RF CG CODE with out him this wouldnt be BADASS

Special thank to hyper999 for helping me with my topsecret project, :p he is the man, not that crazy-modder and Hazer arent the man they made this happen also and many others i cant mention at this time . In due time they will be thanked also don't want to give it away just yet.

UPDATE EDIT: August 31,2011 Did some testing added the video of the test I am working on, still got a ways to go, came up with some more ideas since I have started this project, and so far mechanically seems to be working out better then planned, but wont know till i get it all together and make final test and get everything assembled. wont get much time today to mess with it, but hoping to start painting the controller this weekend. keep watching, more pics yet to come, cant really post things at the moment would give people time to change theres ...lol
Good Luck to everyone

" I just noticed in my video theres some pieces I left laying there for my next wiring idea....lol can you tell what it is..

September 5,2011
added new video, coming along great now that i got the problem fixed, I know your wondering whats going on in such short videos, but it will all be revealed at the end, pretty good ideas come from team work, and I cant take all the credit for these simple little mods, but things came along and working out pretty good so far with 7 days left of the competition, and still need to finish the 9mm shell buttons continued belowVVVVV
FINISHED
http://www.youtube.com/watch?v=LhB-0YpXhTY

FOOKz™ · « **Reply #1 on:** August 07, 2011, 12:56:00 AM »

since nobody commented on yours yet i think that you have a trick up your sleeve. good luck broski.

1TONpete · « **Reply #2 on:** August 07, 2011, 01:02:37 AM »

I agree w fookz you are holding out.

Rodent · « **Reply #3 on:** August 07, 2011, 06:58:16 AM »

Quote from: FOOKz™ on August 07, 2011, 12:56:00 AM

I think that you have a trick up your sleeve. good luck broski.

You think?...lol

time will tell

Edit: Lets Just say it =BADASS

snowcolt17 · « **Reply #4 on:** August 18, 2011, 10:22:27 AM »

looking good rodent. i like the rol. looks sweet

Rodent · « **Reply #5 on:** August 18, 2011, 01:20:24 PM »

^^^^UPdated^^^^^ will get more pics, also thanks snowcolt17 its coming along just fine so far, alot of testing and I have learned alot also thanks guys and LIke i said beware Modders, this is gonna be a BADASS controller

loboplayero · « **Reply #6 on:** August 18, 2011, 06:42:16 PM »

looking good so far!

i need to mod a 360 controller one day

its just psp its so addicting lol

good luck rodent keep us update!

Rodent · « **Reply #7 on:** August 19, 2011, 03:16:14 PM »

Thanks lobo, just another update I have came up with another idea, and going to see if it works out hopefully it does cuz it will make this controller pretty outstanding, More testing tonight

snowcolt17 · « **Reply #8 on:** August 30, 2011, 11:28:51 AM »

looks nice rodent. i like how you drill the shells primers out. are you going to fill it in with anything to kinda dim the lights? or are you going to put them angled?

Rodent · « **Reply #9 on:** August 30, 2011, 11:32:07 AM »

Nope might even pop the led so it sticks out of the shell 2600mcd are bright but not like the 7000mcd white ones i got need a welding mask...

snowcolt17 · « **Reply #10 on:** August 30, 2011, 11:35:24 AM »

damn. homemade welder/controller. 7000mcd in brass casings. better make some good welding beads

Rodent · « **Reply #11 on:** August 31, 2011, 02:57:43 AM »

Quote from: snowcolt17 on August 30, 2011, 11:35:24 AM

damn. homemade welder/controller. 7000mcd in brass casings. better make some good welding beads

I added the Leds and doesnt seem that bright, right now, course I had some lighting in the back ground, but when placed in the shells got alot brighter, almost like a laser pointer, will have to see,how it turns out so far looking pretty good there.

Updated Pics and test video Thanks for comment loboplayero & snowcolt17

1TONpete · « **Reply #12 on:** August 31, 2011, 04:16:42 AM »

Sweet I like where you are heading with this. That button modd is coming along great. Did you already fill the bullets with hot glue? If and when you do it should diffuse the leds a lil bit. Great job so far.

Rodent · « **Reply #13 on:** August 31, 2011, 08:45:33 AM »

First i gotta finish cutting the tabs for the buttons, was also thinking of sitting the led inside the hole a little bit so it doesnt change the color much and the way it is now the led shines thru the shell pretty awsome , also thought about drilling the hole out so that the leds pokes out leaving the ball of the led sticking out so it will give it a nice button feel on top of the shell still in the planning

Thanks for the comment glad you really like what i have come up with

Blazinkaos · « **Reply #14 on:** August 31, 2011, 08:58:35 AM »

Good luck on a rodent.

Cookie Monster · « **Reply #15 on:** August 31, 2011, 10:19:36 AM »

man thats gonna look amazing if you sort it out. uuum uuum well atleast my has a paint job

Rodent · « **Reply #16 on:** August 31, 2011, 10:48:34 AM »

Paint hopefully applied this weekend thanks

DARk_ANGEL · « **Reply #17 on:** September 02, 2011, 09:08:04 AM »

Cant wait till this is done rodent this bleep* looks really good

Rodent · « **Reply #18 on:** September 02, 2011, 03:15:50 PM »

Quote from: DARk_ANGEL on September 02, 2011, 09:08:04 AM

Cant wait till this is done rodent this bleep* looks really good

Thank Dark_ANGEL, did some testing today, failed, on other idea I had, but going to give it another go at it, then if weather permits , i can start painting this BADASS Controller

thanks everyone so far for your support and comments cant wait to get this done, and show it off

snowcolt17 · « **Reply #19 on:** September 04, 2011, 04:53:06 PM »

gotta feeling its going to be the baddest controller ever....

Rodent · « **Reply #20 on:** September 04, 2011, 05:48:07 PM »

We shall see ...lmao ... hope to get it done here asap , weather permitting hope to get paint work done

Rodent · « **Reply #21 on:** September 05, 2011, 08:00:12 PM »

Still needs wires tucked away and preped and painted, 7 days left to competitions over. New video added today Septemeber 5, 2011

Rodent · « **Reply #22 on:** September 08, 2011, 11:10:15 AM »

Here are some more pics, times is running out and still got alot to do.

Heres what I got so far, been doing alot of testing and fitting, so far everything I came up with has worked with help from some members mention there names in final post. still gotta drill some holes and prep for paint, test videos above and more pics above. going to be very busy the next couple of days.

Nevbox · « **Reply #23 on:** September 08, 2011, 02:00:28 PM »

Nice
Quick question how does the PBL mod exactly work do u have wires to each button and if so where do u wire them to, as I really struggle when trying to get a wire to stay in the little holes.

snowcolt17 · « **Reply #24 on:** September 08, 2011, 02:18:41 PM »

wtf was you trying to do rodent. roast marshmallows while you were doing the led swap???

Rodent · « **Reply #25 on:** September 08, 2011, 02:20:29 PM »

was having a bad day...lol need to clean it up added flux to it

snowcolt17 · « **Reply #26 on:** September 08, 2011, 02:21:28 PM »

what did the leds do to you. you torched them lmao. jk

looks good

zack247 · « **Reply #27 on:** September 08, 2011, 02:49:05 PM »

looking good rodent!
do i see what i think i see in the last pic?

Rodent · « **Reply #28 on:** September 08, 2011, 02:53:54 PM »

Quote from: zack247 on September 08, 2011, 02:49:05 PM

looking good rodent!
do i see what i think i see in the last pic?

Gee you have to ask? thanks for commenting

running out of time and still gotta paint it and raining here till sunday

Rodent · « **Reply #29 on:** September 08, 2011, 08:59:48 PM »

Ok guys its getting late and didnt get it all buttons done yet between fitting and testing and making sure everthing fits, its slow motion, and coming along pretty good hope to finish up the buttons tomorrow and move forward and paint this badass controller Sunday and assemble it monday night, this is how Its done, and gets me in gear to get motiveated meetting deadlines

here it is tell me what your thoughts are sorry so short on video
http://www.youtube.com/watch?v=M_jvmZ_Vhtw

updated pic -leds mounted in shells nice ball feel on top now

News:

Author Topic: XBOX 360 Blue & White, Modders Beware! (FINISHED) (Read 23759 times)