Xbox 360 slim models unlocked/jtagged

[Rodent]

Nice work on that programming cable looks tidy

Thanks hyper i try to keep it neat and clean as possible in all my work

[3D0kassiah]

how do we restore the original nand if we decide to take  off the reset glitch hack
thanks for posting the pic knew i could count on u

[Anonamous]

how do we restore the original nand if we decide to take  off the reset glitch hack
thanks for posting the pic knew i could count on u

go into nandpro and write your unmodified nand image back that you first dumped before doing the hack.

[Rodent]

Lpt Programmer




power cable to  power the  chip

Cmod Chip wired

I have been working on this in my spare time , being that I do repairs and modding, I try to make things simple as can be by programming certain cmod chips so all i have to do is install the chip for which board I need to retrieve the keys from. and alot of people asked why my chip is different from theres, theres abunch of different ones and got some sites that have wiring for all  so thanks to the sites for your help links posted below. This will save you time and keep your mind straight when searching, thats the greatest thing about Acidmods. Your one stop place that members share with others to help others get the things done they need to.

site that supplied these thank you Gulli
http://board.gulli.com/thread/1670746-xbox-360-glitch-h4ck-for-all-homebrew-fuer-slim-und-phat/

FAT
http://img7.imagebanana.com/img/s5fxq6lb/coolrunner2_fat.png
http://img7.imagebanana.com/img/uekp5xdq/fullviewupdate20110905.jpg
http://s.gullipics.com/image/7/2/s/hq2x3b-juypxj-sg7u/img.jpeg
http://img7.imagebanana.com/img/m88uwbml/glitch48nofullpost.png

SLIM
http://img7.imagebanana.com/img/uekp5xdq/fullviewupdate20110905.jpg
http://img7.imagebanana.com/img/ukife1on/coolrunner2_slim.png
http://img6.imagebanana.com/img/ggldwy3j/haoyu_slim.png
http://img6.imagebanana.com/img/cq9kw4yx/glitchslim.png

[Anonamous]

Oh Rodent, if you happen to have some trouble booting with some Jasper consoles, switch the 1k resistor with a 10k resistor

[Rodent]

Oh Rodent, if you happen to have some trouble booting with some Jasper consoles, switch the 1k resistor with a 10k resistor

thanks thats good info , Probably make a tut on this after just trying to get as much info as possible on AM right no and showing what needs to be done .

[Anonamous]

ok. I honestly would make a tut, but I am absolutely horrible at making them. When I try and describe how to do something I tend to get off track and repetitive, and just confuse the hell out of people.

[Rodent]

ok. I honestly would make a tut, but I am absolutely horrible at making them. When I try and describe how to do something I tend to get off track and repetitive, and just confuse the hell out of people.

well if we work together i am sure we can make it happen, Reason I started posting here pics in case people started before i got tut made seems to be helping so far.

edit: added the pdf in this post for the slim.
https://www.acidmods.com/forum/index.php/topic,40246.msg306184.html#msg306184
here is the the one for FAT


Thanks to snowcolt17 also for helping me find this info
Special thanks to xbox 360 iso. and Boback for making this tutorial:
Here is an update on the cmod chip if you want to add leds to show its working
How to add leds to a coolrunner chip on a RGH Console,
if your using this type of chipboard
this will come in handy for future debugging.
materials needed:
1. 3 differnt color leds.
2. 30AWG Kynar Wire.
3. 330ohm resistors.
4. solder pen, solder flux.

Step 1 prepare your coolrunner chip
pick the color led you want to use for
Power indicator,POST_OUT1, and your
CPU_RST.

Step 2 just follow the image below.

[snowcolt17]

thanks for adding it. hope it helps.