Author Topic: Rapid Fire help  (Read 3665 times)

Offline Sammy

  • BST BAN
  • Granny Spanker
  • *
  • Posts: 393
  • Post quality +15/-1
  • Gender: Male
Rapid Fire help
« on: September 01, 2011, 02:16:22 PM »
Hey guys, my friend wants me to put rapid fire on his controller. he said he will pay me alot if i can do it. And i dont  have any idea at all on how to do it, Can you list some basic things and info i need to do it, Thanks Sammy


Toad: Sam, You sound like your stoned out of your mind lol
Me: :D

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: Rapid Fire help
« Reply #1 on: September 01, 2011, 02:29:57 PM »
Soldering iron with a decent tip (mine is an Antex)
Solder (I Use 7mm lead free)
Drill (if you are installing tactile switches)
Glue Gun (Ditto, but is usefull for securing wires to the board and it's not perm)
Workspace
kynar wire (I use 30awg)
Controller
Drill bit
Dremel or sand paper I use when installing a tactile
A bit of insulation tape is always useful
You could get a PIC programmer (costs a bit) or you could buy a kit from ebay
Also if someone is willing to sell you a pre programmed chip on this forum, you could do it that way,I could send you a chip if you live in the UK.

Standard RF components:
PIC (PIC12F683)
A few resistors
tactile switches
I personally install PIC holders but they are not necessary   

Take a look through the Acid Mod Free Code List, ask your mate what he wants


Offline Sammy

  • BST BAN
  • Granny Spanker
  • *
  • Posts: 393
  • Post quality +15/-1
  • Gender: Male
Re: Rapid Fire help
« Reply #2 on: September 01, 2011, 02:41:21 PM »
Cool, i have everything on this list, but kynar wire, and a PIC. but i dont live in UK, ill prolly buy one from a member hear though. Thanks for replying


Toad: Sam, You sound like your stoned out of your mind lol
Me: :D

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: Rapid Fire help
« Reply #3 on: September 01, 2011, 02:43:41 PM »
Cool, i have everything on this list, but kynar wire, and a PIC. but i dont live in UK, ill prolly buy one from a member hear though. Thanks for replying
Just buy a decent amount of wire, as it is cheap and is used in basically every mod.

I could send one to you but it would take about 2 weeks to get to you and you don't want to wait that long.
« Last Edit: September 01, 2011, 02:45:01 PM by Nevbox »

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Rapid Fire help
« Reply #4 on: September 01, 2011, 03:41:02 PM »
or you could build a programmer for  around $10USD from this site.


https://www.acidmods.com/forum/index.php/topic,22283.0.html

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline Famas

  • Granny Spanker
  • *
  • Posts: 403
  • Post quality +1/-8
  • Acidmods User
Re: Rapid Fire help
« Reply #5 on: September 04, 2011, 07:31:20 AM »
or you could build a programmer for  around $10USD from this site.


https://www.acidmods.com/forum/index.php/topic,22283.0.html

that only works with really old computers i would suggest buying a pic kit witch are made by microchip if you are uk i suggest buying from farnell

http://uk.farnell.com

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: Rapid Fire help
« Reply #6 on: September 04, 2011, 07:36:10 AM »
I got a JDM programmer and a Serial port for my computer and  btw you can't just use a usb adapter. my setup works fine
cost about £15

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Rapid Fire help
« Reply #7 on: September 04, 2011, 10:05:42 AM »
that only works with really old computers i would suggest buying a pic kit witch are made by microchip if you are uk i suggest buying from farnell

http://uk.farnell.com
My computers not but a year old and works just fine . dont know what you mean by really old computers?

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Rapid Fire help
« Reply #8 on: September 04, 2011, 10:13:25 AM »
not all pc/macs have serial ports so if his don't have one or anyone else don't have a serial port has to use a usb programmer

thx for the link famas
« Last Edit: September 04, 2011, 10:14:09 AM by whitetop »
come to the rite place if you kiss admins as they promote you to admin.

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: Rapid Fire help
« Reply #9 on: September 04, 2011, 12:47:30 PM »
If you have a computer u can fit a serial port! they only cost £5 and you can't use a serial to usb adapter as they don't work!

If you have a laptop basically nothing you an do about it you need a usb one

and I only built my PC a few years ago and I am running a serial programmer just fine!

Offline NSG! ModWar

  • Guppy
  • *
  • Posts: 9
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Rapid Fire help
« Reply #10 on: September 24, 2011, 12:02:15 PM »
If it is a Matrix, then it is just a piece of wire and a button. That is, if you only want one mode, and have to puch another, Rather Annooying, Button. haha.

If it is CG or CG 2 though, it needs a PIC and a bunch of soldering. You could also do this to a matrix.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal