flex rapid fire help

[snowcolt17]

i need a little advice on what to do.. i installed it. i didnt have any 30awg laying around so i used 24.. it works good. i get 2 modes. and player 4 doesnt work...

http://youtu.be/HauV1XncIs0

[Rodent]

You might have lifted the led off the pad when you soldered the wire to it.

[snowcolt17]

led is burnt a tad bit. but here is the best pic i could get with my sh*tty webcam

[Rodent]

looks lifted off the pad to me, and no solder  on the pad from what i can tell hard to really see it  .


EDIT: try and add some solder to the led, might just  be  missing  the trace, it lights up when, you press the tac button just not lighting when you turn the controller on. your on the positive side of the led, when  you solder the wire to  it  other side is grounded

[snowcolt17]

i know my cam sucks. i will try to add a bit more solder.

solved one thing since rodent was right. lmao.. it wasnt attached to the pad. it was powering on because it was getting power when i activated the mode.. .facepalm. 

[Rodent]

thanks , just doing my job...lol glad you got it fixed   

[snowcolt17]

so i have tried multiple times to build a programmer...

and the last one seems to work.
when reading, verifying, or writing it lights up.

but i still get a error. but i think thats just a verifying error. here is the error and the log from it