USB FUSE PSP SLIM 2000

[sevydagreat]

About 1 hour ago I dropped my psp slim while it was hooked on the usb cable and now it won't  link to the computer ( giving me the
 " please wait" message).
To diagnose my symptoms I have tried the following:

1) Change usb cables and use alternate memory cards( doesn't work)
2) tried the usb cables and memory cards on a another psp ( works for that psp)
3) cleaned the usb connector heads,( still can't link)
4)taken the whole thing apart trying to see any loose connections or broken bits ( all seems to be in other)
5) reflashed firmware ( no go)
6) tried to toggle usb connections in recovery ( no go)

From the above I have concluded  that I have blown the usb fuse.
What I need is a picture of the usb fuse so i can bridge it.

I have searched everywhere but the only images for psp usb fuses are the ones for psp 1000s.

Hopefully someone can help.

[Crumbz]

what version of psp 2000 do you have?

I may be able to find you the fuse.

[sevydagreat]

Thankx for replying.
I have the v2 mother board, the one that is hackable using pandora


EDIT:

Anyluck finding it?

[mod]Please do not double post. If you need to add something else to your previous post, please modify your post and add on.[/mod]

[Crumbz]

ok well... pics arnt getting posted cuz photobucket wont let me upload them.

But the fuses are marked LB. There are 2 of them located near the USB Port. one is off to the side and the other is directly below.

Bridging both fuses shouldn't hurt anything.

[sevydagreat]

Cheers for letting me know, hmmm time for the hard part of bridging it.

edit: Just realised I suck at soldering. I may have messed it up completely.

[khulet]

BY THE WAY"  how to make usb mod w/led if i charging?? help me pls