Author Topic: Limited Edition MW3 Controller Light Mod (Read 5745 times)

KingMike_OS · « **on:** November 30, 2011, 11:04:52 PM »

RGB Thumb Stick
Ultra White ROL
Ultra White Dome
Light up X Y A B
Smoke Thumb Sticks

build-in Power on Switch & Voltage Doubler Circuit Coming Soon To Acidmods Shop for all Xbox 360 Controller Boards matrix 1 & 2 and Cg 1 & 2

KingMike_OS · « **Reply #1 on:** November 30, 2011, 11:14:16 PM »

Don;t Forget to rate the Video Please in Youtube and feel free to ask any question Just Drop Line Below

toadzilla · « **Reply #2 on:** December 01, 2011, 01:17:43 AM »

wish i had the pateince to do that to a couple my controllers it would be the talk of the neighbour hood

robin1989 · « **Reply #3 on:** December 01, 2011, 02:06:09 AM »

that is very nice mike - gave it thumbs up

1TONpete · « **Reply #4 on:** December 01, 2011, 04:35:16 AM »

Great work Mike. I love it. They need the mw3 cut out so that glows too. But thats what I would do if I got my hands on one of these.

robin1989 · « **Reply #5 on:** December 01, 2011, 04:40:42 AM »

Quote from: 1TONpete on December 01, 2011, 04:35:16 AM

Great work Mike. I love it. They need the mw3 cut out so that glows too. But thats what I would do if I got my hands on one of these.

that might look nice.

do these have RF in

1TONpete · « **Reply #6 on:** December 01, 2011, 05:55:33 AM »

Is this going to be available in a kit package? It would be sweet if it was all smd and on a small board.

Rodent · « **Reply #7 on:** December 01, 2011, 07:16:03 AM »

Nice work...I will have to try that mod myself. KingMike your a awesome modded great job.

Kool1zero · « **Reply #8 on:** December 01, 2011, 08:14:10 AM »

those are pretty cool, i really like the thumbsticks. were those sticks bought from somewhere or adapted from something?

Crumbz · « **Reply #9 on:** December 01, 2011, 08:18:24 AM »

you know ill be in line for those boards when they are available!

OHHHHH YEEEEEAH!

Anonamous · « **Reply #10 on:** December 01, 2011, 09:02:51 AM »

Are you going to be selling the MW3 controller shell with it, or no?

Rodent · « **Reply #11 on:** December 01, 2011, 12:11:40 PM »

When will these be avalible? just in case i get some customers who want this done to theres?

Aggressive Mods · « **Reply #12 on:** December 01, 2011, 04:34:13 PM »

This will be helpful, got an idea of how much the price will be?

KingMike_OS · « **Reply #13 on:** December 01, 2011, 05:16:26 PM »

the board should be out before x mas and price should be anywhere from $9.99 - $13.99

that price only give you

Power on Switch & Voltage Doubler Circuit for all CG and matrix xbox controller also can be use in any device as longest there is min 2.8V and you

Get 3.3V Out and for full kits with everything from RGB LEDs and A B X Y LEDS thumb sticks and all required Wires shold be around $29.99

Aggressive Mods · « **Reply #14 on:** December 01, 2011, 06:30:23 PM »

ight let me know. haha interested.

Ok quick question, I was trying to do LED rumble activated thumbsticks, and you know how certain LED colors require a different amount of voltage? Well i used a mutlimeter and like the rumble packs only have like 1.2 volts in them lol, you know how to get more flowing through them? Like i know you can do red, yellow, and like orange for this, but like blue, green, etc... require like 3.2 volts.

btw i was using 3mm LEDs.

Anonamous · « **Reply #15 on:** December 01, 2011, 06:31:02 PM »

Quote from: KingMike_OS on December 01, 2011, 05:16:26 PM

the board should be out before x mas and price should be anywhere from $9.99 - $13.99

that price only give you

Power on Switch & Voltage Doubler Circuit for all CG and matrix xbox controller also can be use in any device as longest there is min 2.8V and you

Get 3.3V Out and for full kits with everything from RGB LEDs and A B X Y LEDS thumb sticks and all required Wires shold be around $29.99

What would be the chances of getting a board design with a schematic? :p lol

KingMike_OS · « **Reply #16 on:** December 01, 2011, 08:12:38 PM »

Quote from: Aggressive Mods on December 01, 2011, 06:30:23 PM

ight let me know. haha interested.

Ok quick question, I was trying to do LED rumble activated thumbsticks, and you know how certain LED colors require a different amount of voltage? Well i used a mutlimeter and like the rumble packs only have like 1.2 volts in them lol, you know how to get more flowing through them? Like i know you can do red, yellow, and like orange for this, but like blue, green, etc... require like 3.2 volts.

btw i was using 3mm LEDs.

far as LED rumble activated thumbsticks goes i use a mosfet or transistor so when the rumble is trigger or On the transistor will Route main power
from Source or the Voltage Doubler to the leds .. and make it more fun will use PIC Chip that goes to a RGB and have random code effect so each time the
rumble is Turn on the PIC Chip will chose a Diff LED Color Blue , Red , Green or mixing them together for diff color effect.

That how i would fix the power issue on Rumble and just use that voltage for my Signal for the the PIC.

Aggressive Mods · « **Reply #17 on:** December 01, 2011, 08:17:29 PM »

Can you tell me what type of transisters called?

KingMike_OS · « **Reply #18 on:** December 01, 2011, 08:19:06 PM »

2N3904 NPN switching transistor

Aggressive Mods · « **Reply #19 on:** December 01, 2011, 08:27:19 PM »

Quote from: KingMike_OS on December 01, 2011, 08:19:06 PM

2N3904 NPN switching transistor

Thanks man, much appreciated. ONe last thing, you think u can link me to a vid on how to use it lol. never used one before haha, thanks if you can.

Anonamous · « **Reply #20 on:** December 01, 2011, 08:37:23 PM »

for just a rumble activated led you could hook up the controllers main power to the collector, the power for the rumble pack to the base, and the emmiter to the anode of your led (anode is the +)

nEoVaLoR · « **Reply #21 on:** December 01, 2011, 09:23:23 PM »

Quote from: KingMike_OS on December 01, 2011, 05:16:26 PM

the board should be out before x mas and price should be anywhere from $9.99 - $13.99

that price only give you

Power on Switch & Voltage Doubler Circuit for all CG and matrix xbox controller also can be use in any device as longest there is min 2.8V and you

Get 3.3V Out and for full kits with everything from RGB LEDs and A B X Y LEDS thumb sticks and all required Wires shold be around $29.99

Please go through with this man!!! This would be awesome to have, and I know i'm not the only one to think that.

Nice work, like always

Blazinkaos · « **Reply #22 on:** January 01, 2012, 07:18:51 AM »

Thats awesome

News:

Author Topic: Limited Edition MW3 Controller Light Mod (Read 5745 times)