Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
so i got a rgh slim from 3D0. It doesnt really have the best boot times but i can live with that. But now it is not even booting after leaving the console on for over 20min. Could someone please help. It would be much appreciated.
i havent opened it. But it not booting is not making me very happy.
Have you made any changes? taken the hard drive out? made any changes with in the console? give me full details I understand its nto booting.
unplug it and plug everything back in power cord that is and try that, also make sure the av cables are switched right... unless you have it on hdmi
could be possible one of the wires , either on the Orange wire, which is the STBY_CLK stand by clock for booting, near the hana chip or the cpu_rst line might have come off... I would contact 3D0 see if he can help or ... if this has accured and you can solder , then I would say try to resolder it, (BUT IF YOU CAN"T THEN I WOULD SUGGEST GETTING SOMEONE WHO CAN) these solder points are really delicate and can rip traces or even pul them off the board.
Ok well if he can't i would be glad to do it for you but , shipping cost , both ways, plus whatever it takes to fix it.. let me know , also glad he is willing to help you get it fixed. keep me updated.,
will fix today soon as i receive it
Fixed and returned feel free to leave good bad neutral feedback