Author Topic: Broken connector to backlight ( damaged pads )  (Read 3054 times)

Offline macsurf

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Acidmods User
Broken connector to backlight ( damaged pads )
« on: September 13, 2012, 12:09:01 PM »
Hello

I got console with damaged solder pads on mainboard, the pads are the backlight connector.
I need to find alternative points to solder these connector in place damaged pads.
Please take a look at photo of mainboard with damaged solder pads. Mainboard is TA-086. Thank you for help and I am sorry for my poor english :)


Offline Luigus

  • Who Farted ???
  • *
  • Posts: 219
  • Post quality +6/-3
  • Gender: Male
  • PSP-Direct Team
Re: Broken connector to backlight ( damaged pads )
« Reply #1 on: September 13, 2012, 12:39:25 PM »
I'm Guessing here, I haven't worked on psp's for a while now. It won't hurt to give it a try.



EDIT: The copper lettering on the picture (eg. CN4902) are ground
« Last Edit: September 13, 2012, 12:41:32 PM by Luigus »

Offline macsurf

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Acidmods User
Re: Broken connector to backlight ( damaged pads )
« Reply #2 on: September 14, 2012, 04:18:54 AM »
Thanks for your help :)
So I marked ground point on the photo I hope that now everything is good.


Offline Luigus

  • Who Farted ???
  • *
  • Posts: 219
  • Post quality +6/-3
  • Gender: Male
  • PSP-Direct Team
Re: Broken connector to backlight ( damaged pads )
« Reply #3 on: September 14, 2012, 05:20:37 AM »
As long as that two points is ground, it should work.

Offline COREGAMER

  • King of the Wii-tards
  • *
  • Posts: 164
  • Post quality +4/-0
  • Gender: Male
  • I <3 LEDs
Re: Broken connector to backlight ( damaged pads )
« Reply #4 on: September 14, 2012, 05:41:37 AM »
OR if that does not work you can mod the backlight and but in some white 0603's in there. I have done it once and it worked pretty good
"A Gamer is only as good as his hardware"

Offline snowcolt17

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
Re: Broken connector to backlight ( damaged pads )
« Reply #5 on: September 15, 2012, 11:29:50 AM »
this is a pic from the psp phat raw scans. the best pic i can find. thanks to robin. but it looks different from yours



 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal