ROL Mimic on newer PHAT RF02 Module board help. thanks

[whuthefxk]

hi, I have been reading up on putting together a ROL Mimic circuit and realized that I have a RF02 version with completely different circuitry setup on the back. 

Has anyone ever looked into similarities in pin outs?



Thanks Willy

[3D0kassiah]

https://www.acidmods.com/forum/index.php?topic=40506.0

[whuthefxk]

Yea, I've been looking at that thread and an older one for awhile.  But I wasn't sure if I should Bump an old thread or not. That thread never came across an RF-02 board

[3D0kassiah]

please post pic of your rf board

[Phantom]

I had an rf-02 board and didnt even bother trying to work with it lol, your best bet would be to try get an older board, the rf-02 is missing those transistors

http://pictures.xbox-scene.com/xbox360/jasperv2/STP67429.JPG

http://pictures.xbox-scene.com/xbox360/jasperv2/STP67429.JPG

(not my pics)

[whuthefxk]

Would another RF board of older revisions work with this newer  phat HDMI 360?

Phantomz0 has a great photo of the back side of the board i have. but here is my photos of my board for the front side.

[3D0kassiah]

i dont think it should matter what board you use to be honest i could be wrong
but if there interchangeable im sure i can find you an older working rf board have some somewheres
i dont think it should matter because i had a bunch of rf boards at one point and i would mix and match between consoles none gave me an issue
can someone confirm 
be more then happy to help you out if there interchangeable ill look for one tomorrow 

[Phantom]

yeah the older rf boards will work on the newer phat 360's, i just found those pics on xbox-scene they're not mine

[whuthefxk]

I dug around my parts and found an older RF module, ill give it a whirl and see where i go with it. hopefully its smooth sailing from here. Thanks yous guys! Almost five years for me and the AM community is still always there for you.

EDIT:

So I have been using 2N3906 and ran into a problem.  When I sync and have one controller on, both P1 and P2 (xbox is horizontally) are lit up.  Having controller 1 and 2 on, P1 and P2 lit up.  With controllers 1, 2, 3 on I get all lights on. 

@Phantomz, When you were doing your mimic, what transistor did you use? and did you ever get it to fully work?

THanks