first, i want to say thanks for inviting me to your forum and contest. this is my first modding contest. good luck to all. with out further a due. here we go. i chose an original xbox as my retro console to mod. I've looked at a lot of modded xboxs and thought a lot more could have been done to them. this is what i came up with.
ignore the controller and the dvd dongle, i didnt have time to mod those. i did soft-mod though. i wanted to install a larger hard drive but i didnt recieve it in time.

these are after the cut outs and shave. i shaved off all the ribs on the sides and shaved off the xbox on the dvd tray and the info on the right.



this is the marble effect i did. i hope it shows up well in the pics.


i switched out the old IDE ribbon cable for a lo-pro one that i took the rubber shield off of. i think it looks better this way.

my modded controller ports. i put buttons in the port to turn on an l.e.d. when a controller is pluged in. each port has its own button and l.e.d.

the wires and l.e.d.s for the ports.

l.e.d. placement. notice the slits i cut out of the top of the port.

its complete. 5 seperate pieces of plexi. 4 of them are bubbled. more airbrushing and close ups.


the side with mesh.

nice jewel.

tiny bubbles.

the other side.

more bubbles.

with the lights on. a total of 14 l.e.d.s. 4 blues in the top, 2 blues for the eject button...

2 UV/purples on the bottom of this side...

2 more UV/purples on this side...

and a total of 4 white l.e.d.s, 1 for each controller port.


i hope you like it. i will be posting a video soon with the controller ports in action and proof of the soft-mod. thanks and good luck.
**edit**
i re-made the video with music and posted it on youtube. way better than before. hope you like it.
ICE BOX RETRO