Author Topic: Custom DC Arc Welder (BOREDEM) (Read 18483 times)

FOOKz™ · « **on:** March 04, 2010, 07:24:06 PM »

WARNING!! HIGH VOLTAGE
READ BELOW

I am a Professional and i want to show off what i like to do in my spare time. Do N0T EvER TRY AT HOME because your mom will yell at you are you could kill yourself.

Do the Math (350 Volts)*(1.2 Amps) = 420 Watts of PURE DC power PER PULSE.

Capacitors May explode if improper ratings are met.

I already shocked myself TWICE. So don't Try this, I Tried it for you. Now enjoy.

SCHEMATIC --

Photos --

VIDEO --

My DC Arc Welder in 5 Minutes

Modded Matt · « **Reply #1 on:** March 05, 2010, 05:23:08 AM »

cool work fookz

but let me just say!!!!

KIDS, DO NOT TRY THIS AT HOME, RISK OF SERIOUS INJURY OR DEATH
PLEASE, PLEASE DONT TRY THIS, IF YOU DO ACIDMODS TAKES NO RESPONCABILITY FOR YOUR ACTIONS.

FOOKz™ · « **Reply #2 on:** March 05, 2010, 05:39:35 PM »

I got shocked a third time trying to assemble it onto a plexi-glass base for the final design.

When I tested it I laid my hand on top of the capacitors; touching the exposed metal part that shocked me.

PspKicks316 · « **Reply #3 on:** March 05, 2010, 05:54:22 PM »

That's crazy. Do you ever do anything normal?

aZiZ1 · « **Reply #4 on:** March 05, 2010, 06:04:38 PM »

Quote from: PspKicks316 on March 05, 2010, 05:54:22 PM

That's crazy. Do you ever do anything normal?

sorry i loll'ed

FOOKz™ · « **Reply #5 on:** March 05, 2010, 07:58:53 PM »

Quote from: PspKicks316 on March 05, 2010, 05:54:22 PM

That's crazy. Do you ever do anything normal?

No, I'm extraordinary.

crazy-modder · « **Reply #6 on:** March 05, 2010, 09:54:56 PM »

Wow, thats impressive. Nothing is more awesome than the human mind

FOOKz™ · « **Reply #7 on:** March 06, 2010, 07:05:10 PM »

You guys Want an encore?

crazy-modder · « **Reply #8 on:** March 06, 2010, 08:17:05 PM »

Ya i do, i want too see a completely welded car chassis that you welded with that... lol or a fully welded gokart

FOOKz™ · « **Reply #9 on:** March 06, 2010, 09:59:22 PM »

I'mma BeeF this up to something more powerful that welds with some actual 1/8" DIA welding rods.

For the record everyone don't try and weld galvanized steel, it will kill you... days later.

SN!P3R · « **Reply #10 on:** March 07, 2010, 07:21:38 AM »

Durrrrr

FOOKz™ · « **Reply #11 on:** March 13, 2010, 04:50:42 PM »

So You Guys Want an Encore, Huh?

Transformer Specs:
120V RMS Transformer Primary
40V RMS Transformer Secondary

Voltage Doubler Out:
40V AC RMS Input @ 10 Amps
65V DC RMS Output @ 7 Amps

Diagram:

DC Arc Welder V2 -- Much More Power

Neubit · « **Reply #12 on:** March 13, 2010, 05:44:39 PM »

Can we see you take this thing to a psp mobo? looks like the missing component required to do a led swap

FOOKz™ · « **Reply #13 on:** March 13, 2010, 05:46:35 PM »

Absolutely, yes, why not! How about instead I attach multiple PSPs to it?

crazy-modder · « **Reply #14 on:** March 13, 2010, 06:10:37 PM »

Dude i gotta see that thing in action... you should weld something awesome with it. Like an acid mods logo....

FOOKz™ · « **Reply #15 on:** March 13, 2010, 06:14:09 PM »

Dude i'm honestly a bit scared to try this one out.

The Spark is so bright i can ruin my eyeballs.

I want a welder's mask or a really really good pair of sunglasses.

crazy-modder · « **Reply #16 on:** March 13, 2010, 06:23:19 PM »

Heres some cheap ones from fleabay... lol they look awesome, im gonna buy some of these the next time i weld.

http://cgi.ebay.com/SAFETY-GOGGLES-GLASSES-EYE-FACE-WELD-SHIELD-FOR-WELDERS_W0QQitemZ250485672537QQcmdZViewItemQQptZBI_Welding_Supplies?hash=item3a521c0a59

FOOKz™ · « **Reply #17 on:** March 13, 2010, 07:26:13 PM »

I just made one out of a Scrap Piece of Plexi Glass a sharpie and some packing tape.

I Layered Sharpie on the plexi glass and put tape on it, put sharpie on the tape and put another layer of tape over it and colored that layer with sharpie for about 15 layers.

I can't mount my camera very well because i have to hold my make-shift welding tip made from lead-free plumber's solder and a 5 minute DIY welding mask!

Also I will try to make this into an Actual Piece of equipment since everything works so well. So far i nearly joined two aluminum heat sinks together with copper pipe solder!!! But it broke off the minute it cooled </sadface>

crazy-modder · « **Reply #18 on:** March 13, 2010, 07:47:16 PM »

Dang that is so awesome though....you should just go out and buy a couple welding rods. Hmm your next project should be a mig welder with some oxyacetylene lol that would be awesome. Get a mini hi pressure tank with some oxyacetylene. Or you should make a homemade plasma cutter. Ok im getting carried away

FOOKz™ · « **Reply #19 on:** March 13, 2010, 07:51:37 PM »

Quote from: crazy-modder on March 13, 2010, 07:47:16 PM

Or you should make a homemade plasma cutter.

A High Current Fly-Back-Transformer and a few switching transistors. Hells yeah.

Quote

Ok im getting carried away

Not Really.

csk · « **Reply #20 on:** October 11, 2014, 08:22:54 PM »

Quote from: FOOKz™ on March 04, 2010, 07:24:06 PM

SCHEMATIC --

Hi
sorry to revice this topic.
I was looking for a week or two now, and i finally find something that i would like to build with 12v.

the problem is, can you tell me the list for parts?
i'm trying to look for those part, but i can't get the same as your pic.

i'm not an expert, but i can do well with label on schematic...

thx
and sorry again.

FOOKz™ · « **Reply #21 on:** October 11, 2014, 10:50:31 PM »

Just going to say this... if you can't figure out the specs for parts you need... you probably don't understand the risks involved with building this.

Ratings on the schematic are ridiculous just so people actually don't try it.

The capacitors were rated at 400 Volts, each are 1000uF.
The diodes were some "medium power" rectifier diodes, $5 a piece I think. Something that can handle [12 Volts @ 8 Amps Continuous] or a maximum of [1000 Volts @ 10mA momentarily]

This circuit resembles a basic TIG welder FYI.

csk · « **Reply #22 on:** October 12, 2014, 06:33:45 AM »

thx alot for your quick answer.

no, i never learn TIG welder or any basic welder.

I just learn the basic electronic. but i do like to diy stuff. I did built ac arc welder from transformer microwave oven, it just too strong and too big for my need. i did try the spot welder...

i just need something for small project and least space.

thx again,

News:

Author Topic: Custom DC Arc Welder (BOREDEM) (Read 18483 times)