Hello Acidmods!
I recently acquired alot more free time to tinker, and thought i would try and create one of my projects i started.
So basically this project was started about 3 years ago but i never got around to finishing it and thought now would be a great time to finish it.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PARTS NEEDED
- Bluetooth/Charging Module (Salvaged from EBT1100 Bludio Speakers)- 3800mAh 5v = 3.7v Li-Po Battery- 3" TangBass Subwoofer- 1/4" thick FoamBoardI will be building a custom housing for the equipment out of Foamboard insulated with 5 coats of Krylon clearcoat on the inside and 5 coats of black krylon paint on the outside with a final 2 coats of clearcoat for looks. (i chose foamboard because its light, cheap and easy to work with)
Currently i am waiting until i get all the materials needed to begin uploading photos.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TOOLS NEEDED
- Soldering Iron (15 - 60 Adjustable Wattage)- Rosin Core Solder w/ Flux (32 gauge)- Desoldering Braid- Magnet Wire (30/26/22 gauge) + I will be using all three for various button remaps and wiring----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Stay tuned for updates coming soon!