« previous next »
Pages: [1]   Go Down

Author Topic: ps4 L3  (Read 2465 times)

Offline Yasso

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
ps4 L3
« on: March 23, 2019, 03:54:28 AM »
hello friends I have a problem with L3 (Board 055), I have exchanged because the character in the game could not run, now I have the problem that the character in the game moves slowly without me touching L3. have dived several times L3 but the problem remained.
I think the problem lies with the board / pins of L3. can someone help me, what option do I have? and thanks google for my english :huh:








the figure moves in the right direction from left to right
« Last Edit: March 23, 2019, 06:00:15 AM by Yasso »
Logged

Offline LethalPrime

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 73
  • Post quality +1/-0
  • Acidmods User
Re: ps4 L3
« Reply #1 on: March 23, 2019, 11:37:05 AM »
You replaced the left stick now you have to replace the right
Logged

Offline Yasso

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: ps4 L3
« Reply #2 on: March 24, 2019, 02:07:23 AM »
Hi, thank you for your answer ... you mostly R3. so if I change L3 and it has a mistake I have to change R3 as well
Logged

Offline Yasso

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: ps4 L3
« Reply #3 on: March 24, 2019, 03:29:10 AM »
Have now exchanged R3 synonymous but unfortunately the problem is still there :nono:
 there a way to recalibrate the sticks?  Windows program I know that does not work in PS.4 mode

Greetings from Germany
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: ps4 L3
« Reply #4 on: March 26, 2019, 03:44:53 AM »
Where did you get the replacement stick from?

What is the voltage of the middle pin of the X-axis? It should be right around 1.6v on all of them with the sticks at the center position, not touched.

Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Yasso

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: ps4 L3
« Reply #5 on: March 28, 2019, 12:39:03 PM »
hi thank you for your answer, have the sticks from defective boards removed.
and who is more than 1.6V, what is it?

nice greetings
« Last Edit: March 28, 2019, 12:57:25 PM by Yasso »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: ps4 L3
« Reply #6 on: March 29, 2019, 03:38:37 AM »
Use a DMM, Digital Multi-Meter, and measure the voltage on each Stick from Ground to the X and then the Y Axis. Do not move the Stick, the voltage should measure around 1.6v each.

Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Yasso

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: ps4 L3
« Reply #7 on: March 30, 2019, 01:06:10 PM »
Hi I measured and got X-axis and this value




and at Y-axis this one


what can I do now
thank you for your help
« Last Edit: March 30, 2019, 01:11:24 PM by Yasso »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: ps4 L3
« Reply #8 on: March 30, 2019, 04:06:59 PM »
You need to set the meter to DC, 1 more click to the right V-, you have it on AC there V~.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Yasso

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: ps4 L3
« Reply #9 on: March 31, 2019, 05:42:12 AM »
OK a second try, I have the voltage of L3 / R3 x-axis and y-axis







I'm happy who I solved the problem, I'm grateful for every tip that helps me

« Last Edit: March 31, 2019, 09:52:14 PM by Yasso »
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal